This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-10-04. 3 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row says where its value comes from.
Retained specification excerpt: net Width: 35.94 in | on of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Ca
Value used by ExactFit
35.94 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag measurement source — p.maytag-30-cu.-ft.-xl-capacity-french-door-bottom-mount-refrigerator-with-in-door-ice-dispensing-system.mrff5336tz.html Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: net Width: 35.94 in | on of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Ca Reviewed: 2026-09-04
net Width: 35.94 in | on of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Cabinet Width 35.938 in Capacity 29.58 cu. ft. Common Size 36 in Depth 36.8125 in Depth Closed Excludin
net Width: 35.94 in | on of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Cabinet Width 35.938 in Capacity 29.58 cu. ft. Common Size 36 in Depth 36.8125 in Depth Closed Excludin
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag installation document — 106163207.pdf assets.skulytics.io · Installation manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Height To Top Of Door Hinge: 70.0 in | MRFF5336TZ Height To Top Of Door Hinge. 70 in. Maximum Height
Value used by ExactFit
70 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag measurement source — p.maytag-30-cu.-ft.-xl-capacity-french-door-bottom-mount-refrigerator-with-in-door-ice-dispensing-system.mrff5336tz.html Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Door Hinge: 70.0 in | MRFF5336TZ Height To Top Of Door Hinge. 70 in. Maximum Height Reviewed: 2026-09-04
Height To Top Of Door Hinge: 70.0 in | MRFF5336TZ Height To Top Of Door Hinge. 70 in. Maximum Height. 70.0625 in. Minimum Height. 69 in. Net Weight. 295.42 lbs. Refr
Height To Top Of Door Hinge: 70.0 in | MRFF5336TZ Height To Top Of Door Hinge. 70 in. Maximum Height. 70.0625 in. Minimum Height. 69 in. Net Weight. 295.42 lbs. Refr
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag installation document — 106163207.pdf assets.skulytics.io · Installation manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag installation document — 106163207.pdf assets.skulytics.io · Installation manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Retained specification excerpt: Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 36.81 in. Context:
Value used by ExactFit
36.81 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag measurement source — p.maytag-30-cu.-ft.-xl-capacity-french-door-bottom-mount-refrigerator-with-in-door-ice-dispensing-system.mrff5336tz.html Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 36.81 in. Context: Reviewed: 2026-09-04
Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 36.81 in. Context: ft. Common Size 36 in Depth 36.8125 in Depth Closed Excluding Handles 34.688 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Ca
Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 36.81 in. Context: ft. Common Size 36 in Depth 36.8125 in Depth Closed Excluding Handles 34.688 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Ca
Other evidence found
37.125 in — superseded
Document 106163207.pdf; page 1. Model scope: not separately recorded. Raw value: Depth with door handle -> 37
1/8"(942.8 mm). The final reviewed registry supersedes this earlier audit value.
Effect on fit result
This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Retained specification excerpt: Depth With Door Open 90 = 49.0 in | 688 in Depth Closed Including Handles 36.813 in Depth Excluding
Value used by ExactFit
49 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag measurement source — p.maytag-30-cu.-ft.-xl-capacity-french-door-bottom-mount-refrigerator-with-in-door-ice-dispensing-system.mrff5336tz.html Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth With Door Open 90 = 49.0 in | 688 in Depth Closed Including Handles 36.813 in Depth Excluding Reviewed: 2026-09-04
Depth With Door Open 90 = 49.0 in | 688 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 9.01 cu. ft. Gross Weight 326.28 lbs Height 70.0625 in
Depth With Door Open 90 = 49.0 in | 688 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 9.01 cu. ft. Gross Weight 326.28 lbs Height 70.0625 in
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Retained specification excerpt: Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 35.8
Value used by ExactFit
36.8125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: 35.8125 + 2 * 0.5
Confidence label: medium.
Primary evidence
Maytag measurement source — dimension-guide-w11817847-reva.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 35.8 Reviewed: 2026-09-04
Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 35.8125 + 2 * 0.5 = 36.8125 in
Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 35.8125 + 2 * 0.5 = 36.8125 in Calculation or inference: 35.8125 + 2 * 0.5.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Minimum opening height derived from highest stored appliance endpoint 70.0 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF5336TZ
Confidence label: medium.
Primary evidence
Maytag measurement source — dimension-guide-w11817847-reva.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1/2" space on each side Calculation or inference: documented DOE model pattern MRFF5336TZ.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF5336TZ
Confidence label: medium.
Primary evidence
Maytag measurement source — dimension-guide-w11817847-reva.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1/2" space on each side Calculation or inference: documented DOE model pattern MRFF5336TZ.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF5336TZ
Confidence label: medium.
Primary evidence
Maytag measurement source — dimension-guide-w11817847-reva.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1/2" space on each side and at the top Calculation or inference: documented DOE model pattern MRFF5336TZ.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF5336TZ
Confidence label: medium.
Primary evidence
Maytag measurement source — dimension-guide-w11817847-reva.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
2" space behind Calculation or inference: documented DOE model pattern MRFF5336TZ.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization:
Confidence label: high.
Primary evidence
Maytag measurement source — 106163207.pdf assets.skulytics.io · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-17
Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). next to a fixed wall, leave a minimum space of 3.75"
Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). next to a fixed wall, leave a minimum space of 3.75"
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Maytag measurement source — 106163207.pdf Publisher not recorded
Page 2
Value used by ExactFit
14 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag measurement source — 106163207.pdf Publisher not recorded · Retained document Model scope: Not established Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-10-04
"To allow for a full door swing, you will need to leave 14" (355 mm) of space between the refrigerator and the wall"; the drawing shows the door fully open at 135 degrees.
The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.
Why this value was used
"To allow for a full door swing, you will need to leave 14" (355 mm) of space between the refrigerator and the wall"; the drawing shows the door fully open at 135 degrees.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag measurement source — 106163207.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-10-04
Product dimensions: G Cabinet width 35 13/16" (909 mm). The stored 35 15/16 was a retail figure.
Product dimensions: G Cabinet width 35 13/16" (909 mm). The stored 35 15/16 was a retail figure.
Other evidence found
35.938 in — superseded
marksappliance.com; location not retained. Model scope: not separately recorded. Raw value: Width | 39 in. | | Gross Weight | 326.28 lbs. | | Cabinet Width | 35.938 in | | Capacity | 29.58 cu. ft. | | Common Size | 36. The final reviewed registry supersedes this earlier audit value.
Selected: 36.81 in. Earlier retained values: 37.125 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 36.81 in. Context: ft. Common Size 36 in Depth 36.8125 in Depth Closed Excluding Handles 34.688 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Ca
Model numbers covered: MRFF5336TZ. Publication/revision date: Not recorded. Reviewed: 2026-10-04.
6 displayed measurements supported: Cabinet height; Depth without door; Depth with door, without handles; Wall clearance for door open to 90°; Wall clearance for fully open door; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Evidence reflects the sources reviewed on 2026-10-04. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.
