Measurement evidence for Maytag MRFF5033PZ

Value used by ExactFit

32.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRFF503 Fingerprint Resistant Stainless Steel | Appliance Depot
appliancedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: net Width = 32.625 in | FF503 Fingerprint Resistant Stainless Steel | Appliance Depot | | | --- | |
Reviewed: 2026-09-04

net Width = 32.625 in | FF503 Fingerprint Resistant Stainless Steel | Appliance Depot | | | --- | | Cabinet Width | 32.625 in | | Depth | 34.5 in | | Depth Closed Excluding Handles | 32 in | | Depth Closed

Why this value was used

net Width = 32.625 in | FF503 Fingerprint Resistant Stainless Steel | Appliance Depot | | | --- | | Cabinet Width | 32.625 in | | Depth | 34.5 in | | Depth Closed Excluding Handles | 32 in | | Depth Closed

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRFF503 Fingerprint Resistant Stainless Steel | Appliance Depot
appliancedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Cabinet = 68.875 in | ity Volume | 6.45 cu. ft. | | Gross Weight | 276 lbs | | Heig
Reviewed: 2026-09-04

Height To Top Of Cabinet = 68.875 in | ity Volume | 6.45 cu. ft. | | Gross Weight | 276 lbs | | Height | 70.125 in | | Height To Top Of Cabinet | 68.875 in | | Height To Top Of Door Hinge | 70.125 in | | Net Weight | 265 lbs | | Refrig

Why this value was used

Height To Top Of Cabinet = 68.875 in | ity Volume | 6.45 cu. ft. | | Gross Weight | 276 lbs | | Height | 70.125 in | | Height To Top Of Cabinet | 68.875 in | | Height To Top Of Door Hinge | 70.125 in | | Net Weight | 265 lbs | | Refrig

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRFF503 Fingerprint Resistant Stainless Steel | Appliance Depot
appliancedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Door Hinge = 70.125 in | t | 276 lbs | | Height | 70.125 in | | Height To Top Of Ca
Reviewed: 2026-09-04

Height To Top Of Door Hinge = 70.125 in | t | 276 lbs | | Height | 70.125 in | | Height To Top Of Cabinet | 68.875 in | | Height To Top Of Door Hinge | 70.125 in | | Net Weight | 265 lbs | | Refrigerator Capacity Volume | 15.66 | | Total Ref

Why this value was used

Height To Top Of Door Hinge = 70.125 in | t | 276 lbs | | Height | 70.125 in | | Height To Top Of Cabinet | 68.875 in | | Height To Top Of Door Hinge | 70.125 in | | Net Weight | 265 lbs | | Refrigerator Capacity Volume | 15.66 | | Total Ref

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRFF503 Fingerprint Resistant Stainless Steel | Appliance Depot
appliancedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors = 28.125 in | osed Excluding Handles | 32 in | | Depth Closed Including Handle
Reviewed: 2026-09-04

Depth Excluding Doors = 28.125 in | osed Excluding Handles | 32 in | | Depth Closed Including Handles | 34.5 in | | Depth Excluding Doors | 28.125 in | | Depth With Door Open 90 Degree | 47.125 in | | Dispenser Type | Interior Wa

Why this value was used

Depth Excluding Doors = 28.125 in | osed Excluding Handles | 32 in | | Depth Closed Including Handles | 34.5 in | | Depth Excluding Doors | 28.125 in | | Depth With Door Open 90 Degree | 47.125 in | | Dispenser Type | Interior Wa

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

32 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRFF503 Fingerprint Resistant Stainless Steel | Appliance Depot
appliancedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Excluding Handles = 32.0 in | Appliance Depot | | | --- | | Cabinet Width | 32.625 in |
Reviewed: 2026-09-04

Depth Closed Excluding Handles = 32.0 in | Appliance Depot | | | --- | | Cabinet Width | 32.625 in | | Depth | 34.5 in | | Depth Closed Excluding Handles | 32 in | | Depth Closed Including Handles | 34.5 in | | Depth Excluding Doors | 28.125

Why this value was used

Depth Closed Excluding Handles = 32.0 in | Appliance Depot | | | --- | | Cabinet Width | 32.625 in | | Depth | 34.5 in | | Depth Closed Excluding Handles | 32 in | | Depth Closed Including Handles | 34.5 in | | Depth Excluding Doors | 28.125

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRFF503 Fingerprint Resistant Stainless Steel | Appliance Depot
appliancedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Including Handles = 34.5 in | | 32.625 in | | Depth | 34.5 in | | Depth Closed Excludi
Reviewed: 2026-09-04

Depth Closed Including Handles = 34.5 in | | 32.625 in | | Depth | 34.5 in | | Depth Closed Excluding Handles | 32 in | | Depth Closed Including Handles | 34.5 in | | Depth Excluding Doors | 28.125 in | | Depth With Door Open 90 Degree | 47.1

Why this value was used

Depth Closed Including Handles = 34.5 in | | 32.625 in | | Depth | 34.5 in | | Depth Closed Excluding Handles | 32 in | | Depth Closed Including Handles | 34.5 in | | Depth Excluding Doors | 28.125 in | | Depth With Door Open 90 Degree | 47.1

Other evidence found

• 90 in — superseded

  https://www.abcwarehouse.com/maytag-mrff5033pz; location not retained. Model scope: not separately recorded. Raw value: product depth : Depth With Door Open 90 Degree . The final reviewed registry supersedes this earlier audit value. Depth Closed Including Handles = 34.5 in | | 32.625 in | | Depth | 34.5 in | | Depth Closed Excluding Handles | 32 in | | Depth Closed Including Handles | 34.5 in | | Depth Excluding Doors | 28.125 in | | Depth With Door Open 90 Degree | 47.1

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

47.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRFF503 Fingerprint Resistant Stainless Steel | Appliance Depot
appliancedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: 34.5 in | | Depth Excluding Doors | 28.125 in | | Depth With Door Open 90 Degree | 47.125 in | | Dis
Reviewed: 2026-09-04

34.5 in | | Depth Excluding Doors | 28.125 in | | Depth With Door Open 90 Degree | 47.125 in | | Dispenser Type | Interior Water Only | | Free

Why this value was used

34.5 in | | Depth Excluding Doors | 28.125 in | | Depth With Door Open 90 Degree | 47.125 in | | Dispenser Type | Interior Water Only | | Free

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 32.625 + 2 * 0.5

Confidence label: medium.

Primary evidence

Maytag measurement source — https://appliancedepot.com/products/maytag-33-inch-wide-french-door-refrigerator-with-water-dispenser-22-cu-ft-mrff5033pz + local-cache manufacturer-family consensus
appliancedepot.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 33.625 in from product width 32.625 in and explicit 0.5 in clearance o
Reviewed: 2026-09-04

Derived minimum opening width 33.625 in from product width 32.625 in and explicit 0.5 in clearance on each side.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 33.625 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202204/owners-manual-w11468670-revD.pdf
Maytag · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 70.125 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 70.125 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202204/owners-manual-w11468670-revD.pdf
Maytag · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 28.125 in plus documented rear clearance 1.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 28.125 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF5033P*

Confidence label: high.

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202204/owners-manual-w11468670-revD.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-05

1/2" of space on each side

Why this value was used

1/2" of space on each side Calculation or inference: documented DOE model pattern MRFF5033P*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF5033P*

Confidence label: high.

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202204/owners-manual-w11468670-revD.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-05

1/2" of space on each side

Why this value was used

1/2" of space on each side Calculation or inference: documented DOE model pattern MRFF5033P*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF5033P*

Confidence label: medium.

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202204/owners-manual-w11468670-revD.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-05

1/2" of space on each side and at the top

Why this value was used

1/2" of space on each side and at the top Calculation or inference: documented DOE model pattern MRFF5033P*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF5033P*

Confidence label: medium.

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202204/owners-manual-w11468670-revD.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-05

1" of space behind

Why this value was used

1" of space behind Calculation or inference: documented DOE model pattern MRFF5033P*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.5 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Maytag MRFF5033PZ Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-05

next to a fixed wall, leave 2 1/2" (6.3 cm

Why this value was used

next to a fixed wall, leave 2 1/2" (6.3 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRFF503 Fingerprint Resistant Stainless Steel | Appliance Depot
appliancedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: t Stainless Steel | Appliance Depot | | | --- | | Cabinet Width | 32.625 in | | Depth | 34.5 in | |
Reviewed: 2026-09-04

t Stainless Steel | Appliance Depot | | | --- | | Cabinet Width | 32.625 in | | Depth | 34.5 in | | Depth Closed Excluding Ha

Why this value was used

t Stainless Steel | Appliance Depot | | | --- | | Cabinet Width | 32.625 in | | Depth | 34.5 in | | Depth Closed Excluding Ha

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Whirlpool-platform freestanding family installation clearance

Confidence label: low.

Primary evidence

Maytag measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-04

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.