Measurement evidence for Maytag MRFF4236RZ

Value used by ExactFit

35.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — p.maytag-36-inch-wide-french-door-bottom-mount-refrigerator-with-max-cool-setting-25-cu.-ft.mrff4236rz.html
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: net Width = 35.625 in | om Mount Refrigerator with Max ... Stainless Steel (MRFF4236RZ). Dimensions
Reviewed: 2026-09-04

net Width = 35.625 in | om Mount Refrigerator with Max ... Stainless Steel (MRFF4236RZ). Dimensions Cabinet Width 35.625 in Depth Closed Including Handles 35.5 in Depth Excluding Doors 29.125 in Depth Wi | cached support: maytag.com

Why this value was used

net Width = 35.625 in | om Mount Refrigerator with Max ... Stainless Steel (MRFF4236RZ). Dimensions Cabinet Width 35.625 in Depth Closed Including Handles 35.5 in Depth Excluding Doors 29.125 in Depth Wi | cached support: maytag.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.8 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag measurement source — Maytag_MRFF4236RZ_French_Door_Refrigerator_Maytag_MRFF4236RZ.html
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: Height to Top of Cabinet = 68.8 in | nches | | Width With Doors Cl
Reviewed: 2026-09-04

Exact-model cached specification: Height to Top of Cabinet = 68.8 in | nches | | Width With Doors Closed | 35.75 inches | | Height | 70.125 inches | | Height to Top of Cabinet | 68.8 inches | | Height to Top of Door Hinge | 70.125 inches | | Depth | 35.5 inches | | Dep

Why this value was used

Exact-model cached specification: Height to Top of Cabinet = 68.8 in | nches | | Width With Doors Closed | 35.75 inches | | Height | 70.125 inches | | Height to Top of Cabinet | 68.8 inches | | Height to Top of Door Hinge | 70.125 inches | | Depth | 35.5 inches | | Dep

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag measurement source — Maytag_MRFF4236RZ_French_Door_Refrigerator_Maytag_MRFF4236RZ.html
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: Height to Top of Door Hinge = 70.125 in | nches | | Height | 70.12
Reviewed: 2026-09-04

Exact-model cached specification: Height to Top of Door Hinge = 70.125 in | nches | | Height | 70.125 inches | | Height to Top of Cabinet | 68.8 inches | | Height to Top of Door Hinge | 70.125 inches | | Depth | 35.5 inches | | Depth Closed Excluding Handles | 32.875 inches | |

Why this value was used

Exact-model cached specification: Height to Top of Door Hinge = 70.125 in | nches | | Height | 70.125 inches | | Height to Top of Cabinet | 68.8 inches | | Height to Top of Door Hinge | 70.125 inches | | Depth | 35.5 inches | | Depth Closed Excluding Handles | 32.875 inches | |

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth without doors: 29.125 in | Depth without doors | 291/8" (739.8 mm) | G

Why this value was used

Depth without doors: 29.125 in | Depth without doors | 291/8" (739.8 mm) | G

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

32.875 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag measurement source — Maytag_MRFF4236RZ_French_Door_Refrigerator_Maytag_MRFF4236RZ.html
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: Depth Closed Excluding Handles = 32.875 in | hes | | Height to Top
Reviewed: 2026-09-04

Exact-model cached specification: Depth Closed Excluding Handles = 32.875 in | hes | | Height to Top of Door Hinge | 70.125 inches | | Depth | 35.5 inches | | Depth Closed Excluding Handles | 32.875 inches | | Depth Closed Including Handles | 35.5 inches | | Depth Excluding Doors | 29

Why this value was used

Exact-model cached specification: Depth Closed Excluding Handles = 32.875 in | hes | | Height to Top of Door Hinge | 70.125 inches | | Depth | 35.5 inches | | Depth Closed Excluding Handles | 32.875 inches | | Depth Closed Including Handles | 35.5 inches | | Depth Excluding Doors | 29

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — p.maytag-36-inch-wide-french-door-bottom-mount-refrigerator-with-max-cool-setting-25-cu.-ft.mrff4236rz.html
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Including Handles = 35.5 in | r with Max ... Stainless Steel (MRFF4236RZ). Dimensions C
Reviewed: 2026-09-04

Depth Closed Including Handles = 35.5 in | r with Max ... Stainless Steel (MRFF4236RZ). Dimensions Cabinet Width 35.625 in Depth Closed Including Handles 35.5 in Depth Excluding Doors 29.125 in Depth With Door Open 90 | cached support: maytag.com

Why this value was used

Depth Closed Including Handles = 35.5 in | r with Max ... Stainless Steel (MRFF4236RZ). Dimensions Cabinet Width 35.625 in Depth Closed Including Handles 35.5 in Depth Excluding Doors 29.125 in Depth With Door Open 90 | cached support: maytag.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

48.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag measurement source — Maytag_MRFF4236RZ_French_Door_Refrigerator_Maytag_MRFF4236RZ.html
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: hes | | Depth Excluding Doors | 29.125 inches | | Depth With Door Open 90° | 48.125 inches | | Depth
Reviewed: 2026-09-04

hes | | Depth Excluding Doors | 29.125 inches | | Depth With Door Open 90° | 48.125 inches | | Depth - Drawer Open | 53.125 inches | | Carto

Why this value was used

hes | | Depth Excluding Doors | 29.125 inches | | Depth With Door Open 90° | 48.125 inches | | Depth - Drawer Open | 53.125 inches | | Carto

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 35.625 + 2 * 0.5

Confidence label: medium.

Primary evidence

Maytag measurement source — p.maytag-36-inch-wide-french-door-bottom-mount-refrigerator-with-max-cool-setting-25-cu.-ft.mrff4236rz.html + dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Minimum opening derived from exact product width plus explicit symmetric side spacing: 35.625 + 2 * 0.5 = 36.625 in. Side evidence: Failure to do so can result in death, explosion, or fire. | To ensure proper ventilation for your refrigerator, allow for a 1/2" (12.7 mm) space on each side and at the top. Allow for a 1.97" (50 mm) | space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When | deterministic pattern: space_each_side

Why this value was used

Minimum opening derived from exact product width plus explicit symmetric side spacing: 35.625 + 2 * 0.5 = 36.625 in. Side evidence: Failure to do so can result in death, explosion, or fire. | To ensure proper ventilation for your refrigerator, allow for a 1/2" (12.7 mm) space on each side and at the top. Allow for a 1.97" (50 mm) | space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When | deterministic pattern: space_each_side Calculation or inference: 35.625 + 2 * 0.5.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 70.125 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 70.125 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.095 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.125 in plus documented rear clearance 1.97 in.

Why this value was used

Minimum opening depth derived from case-only depth 29.125 in plus documented rear clearance 1.97 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF4236R*

Confidence label: high.

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern MRFF4236R*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF4236R*

Confidence label: high.

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern MRFF4236R*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF4236R*

Confidence label: medium.

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side and at the top

Why this value was used

1/2" space on each side and at the top Calculation or inference: documented DOE model pattern MRFF4236R*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.97 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF4236R*

Confidence label: medium.

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1.97" space behind

Why this value was used

1.97" space behind Calculation or inference: documented DOE model pattern MRFF4236R*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Maytag measurement source — 105160504.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave a 33⁄4" (9.5 cm

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave a 33⁄4" (9.5 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Cabinet width = 904.9 mm | Cabinet width | 355/8" (904.9 mm) | H

Why this value was used

Cabinet width = 904.9 mm | Cabinet width | 355/8" (904.9 mm) | H

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.