Measurement evidence for Maytag MRFF4136RZ

Value used by ExactFit

35.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — a74de7025dd83edbda6fb89ccd40ce32b8820366446ceb8956e39f706fc5bda4.pdf
www.davidselectricinc.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-18

Dimension guide label G, Cabinet width 35 5/8"; no wider door width is printed. Replaces a rounded web listing value of 35 3/4 in.

Why this value was used

Dimension guide label G, Cabinet width 35 5/8"; no wider door width is printed. Replaces a rounded web listing value of 35 3/4 in.

Other evidence found

• 35.75 in — superseded

  www.davidselectricinc.com; location not retained. Model scope: not separately recorded. Raw value: Plain exact-model specification row: Width = 35.75 in | RFF4136RZ (Refrigerators - French 3-Door) - David's Electric Inc. Specifications / Choose an option ; Width, 35.75 inch(es) / 90.81 cm ; Height (With Hinge), 70.12 inch(es) / 178.11 cm ; Overall Depth, 35.5 inch(es) / 90.17 cm. . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗
• 35.75 in — superseded

  www.maytag.com; location not retained. Model scope: not separately recorded. Raw value: Exact-model official manufacturer CAD OBJ bounding-box x-extent = 35.868071 in; visually checked orientation/state and corroborates the retained published value 35.75 in within the declared 1/8 in CAD-geometry tolerance. Raw geometric precision is not published.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.8 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from MRFF4236RZ

Confidence label: medium.

Primary evidence

Maytag measurement source — Maytag_MRFF4236RZ_French_Door_Refrigerator_Maytag_MRFF4236RZ.html
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Medium-confidence chassis inference from MRFF4236RZ. Donors unanimously report height_case_in=68.8 i
Reviewed: 2026-09-04

Medium-confidence chassis inference from MRFF4236RZ. Donors unanimously report height_case_in=68.8 in; at least four direct chassis dimensions match and none conflict. Matching fields: case_width_in, width_doors_closed_in, depth_case_only_in, depth_with_handles_in. Donor evidence: Exact-model cached specification: Height to Top of Cabinet = 68.8 in | nches | | Width With Doors Closed | 35.75 inches | | Height | 70.125 inches | | Height to Top of Cabinet | 68.8 inches | | Height to Top of Door Hinge | 70.125 inches | | Depth | 35.5 inches | | Dep

Why this value was used

Medium-confidence chassis inference from MRFF4236RZ. Donors unanimously report height_case_in=68.8 in; at least four direct chassis dimensions match and none conflict. Matching fields: case_width_in, width_doors_closed_in, depth_case_only_in, depth_with_handles_in. Donor evidence: Exact-model cached specification: Height to Top of Cabinet = 68.8 in | nches | | Width With Doors Closed | 35.75 inches | | Height | 70.125 inches | | Height to Top of Cabinet | 68.8 inches | | Height to Top of Door Hinge | 70.125 inches | | Depth | 35.5 inches | | Dep Calculation or inference: same-brand product-class chassis propagation from MRFF4236RZ.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — 230699MRG01-003_MRFF4136RZ.zip
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model official manufacturer CAD OBJ bounding-box z-extent = 70.045213 in; visually checked ori
Reviewed: 2026-09-11

Exact-model official manufacturer CAD OBJ bounding-box z-extent = 70.045213 in; visually checked orientation/state and corroborates the retained published value 70.125 in within the declared 1/8 in CAD-geometry tolerance. Raw geometric precision is not published.

Why this value was used

Exact-model official manufacturer CAD OBJ bounding-box z-extent = 70.045213 in; visually checked orientation/state and corroborates the retained published value 70.125 in within the declared 1/8 in CAD-geometry tolerance. Raw geometric precision is not published.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth without doors: 29.125 in | Depth without doors | 291/8" (739.8 mm) | G

Why this value was used

Depth without doors: 29.125 in | Depth without doors | 291/8" (739.8 mm) | G

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

32.875 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from MRFF4236RZ

Confidence label: medium.

Primary evidence

Maytag measurement source — Maytag_MRFF4236RZ_French_Door_Refrigerator_Maytag_MRFF4236RZ.html
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Medium-confidence chassis inference from MRFF4236RZ. Donors unanimously report depth_less_handles_in
Reviewed: 2026-09-04

Medium-confidence chassis inference from MRFF4236RZ. Donors unanimously report depth_less_handles_in=32.875 in; at least four direct chassis dimensions match and none conflict. Matching fields: case_width_in, width_doors_closed_in, depth_case_only_in, depth_with_handles_in. Donor evidence: Exact-model cached specification: Depth Closed Excluding Handles = 32.875 in | hes | | Height to Top of Door Hinge | 70.125 inches | | Depth | 35.5 inches | | Depth Closed Excluding Handles | 32.875 inches | | Depth Closed Including Handles | 35.5 inches | | Depth Excluding Doors | 29

Why this value was used

Medium-confidence chassis inference from MRFF4236RZ. Donors unanimously report depth_less_handles_in=32.875 in; at least four direct chassis dimensions match and none conflict. Matching fields: case_width_in, width_doors_closed_in, depth_case_only_in, depth_with_handles_in. Donor evidence: Exact-model cached specification: Depth Closed Excluding Handles = 32.875 in | hes | | Height to Top of Door Hinge | 70.125 inches | | Depth | 35.5 inches | | Depth Closed Excluding Handles | 32.875 inches | | Depth Closed Including Handles | 35.5 inches | | Depth Excluding Doors | 29 Calculation or inference: same-brand product-class chassis propagation from MRFF4236RZ.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth closed including handles = 901.7 mm | Depth closed including handles | 351/2" (901.7 mm) | Q

Why this value was used

Depth closed including handles = 901.7 mm | Depth closed including handles | 351/2" (901.7 mm) | Q

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

48.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag measurement source — 328682914
www.homedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: . ft. Standard Depth French Door Refrigerator ... Depth With Door Open 90 Degrees (in.) 48.125 in. H
Reviewed: 2026-09-04

. ft. Standard Depth French Door Refrigerator ... Depth With Door Open 90 Degrees (in.) 48.125 in. Height to Top ... Model MRFF4136RZ has the follow

Why this value was used

. ft. Standard Depth French Door Refrigerator ... Depth With Door Open 90 Degrees (in.) 48.125 in. Height to Top ... Model MRFF4136RZ has the follow

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 35.75 + 2 * 0.5

Confidence label: medium.

Primary evidence

Maytag measurement source — 792125-maytag-mrff4136rz + dimension-guide-w11722371-reva.pdf
www.davidselectricinc.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Minimum opening derived from exact product width plus explicit symmetric side spacing: 35.75 + 2 * 0.5 = 36.75 in. Side evidence: Failure to do so can result in death, explosion, or fire. | To ensure proper ventilation for your refrigerator, allow for a 1/2" (12.7 mm) space on each side and at the top. Allow for a 1.97" (50 mm) | space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When | deterministic pattern: space_each_side

Why this value was used

Minimum opening derived from exact product width plus explicit symmetric side spacing: 35.75 + 2 * 0.5 = 36.75 in. Side evidence: Failure to do so can result in death, explosion, or fire. | To ensure proper ventilation for your refrigerator, allow for a 1/2" (12.7 mm) space on each side and at the top. Allow for a 1.97" (50 mm) | space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When | deterministic pattern: space_each_side Calculation or inference: 35.75 + 2 * 0.5.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 70.125 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 70.125 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.095 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.125 in plus documented rear clearance 1.97 in.

Why this value was used

Minimum opening depth derived from case-only depth 29.125 in plus documented rear clearance 1.97 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF4136R*

Confidence label: high.

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern MRFF4136R*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF4136R*

Confidence label: high.

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern MRFF4136R*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF4136R*

Confidence label: medium.

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side and at the top

Why this value was used

1/2" space on each side and at the top Calculation or inference: documented DOE model pattern MRFF4136R*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.97 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRFF4136R*

Confidence label: medium.

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1.97" space behind

Why this value was used

1.97" space behind Calculation or inference: documented DOE model pattern MRFF4136R*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Maytag measurement source — 105160504.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave a 33⁄4" (9.5 cm

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave a 33⁄4" (9.5 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — dimension-guide-w11722371-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Cabinet width: 35.625 in | Cabinet width | 355/8" (904.9 mm) | H

Why this value was used

Cabinet width: 35.625 in | Cabinet width | 355/8" (904.9 mm) | H

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.