This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-09-17. 4 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row says where its value comes from.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag measurement source — cd36d2640289ea6e77bb8188065125437563d18000b95fa278ac2cf608d254d9.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-17
Dimension guide W10405120C (9/16), row MFF2055FR: Width - Cabinet (H) 30 1/8" (76.5 cm). Maytag CAD package P200921MX-027c_MFF2055FRZ (Dec 2020) models the cabinet body and the doors at 30 1/8 in. The previous 29 1/2 in (maytag.com "Cabinet Width") matches the MFF2055YE row. Owner decision 2026-09-17.
Dimension guide W10405120C (9/16), row MFF2055FR: Width - Cabinet (H) 30 1/8" (76.5 cm). Maytag CAD package P200921MX-027c_MFF2055FRZ (Dec 2020) models the cabinet body and the doors at 30 1/8 in. The previous 29 1/2 in (maytag.com "Cabinet Width") matches the MFF2055YE row. Owner decision 2026-09-17.
Other evidence found
29.5 in — superseded
www.maytag.com; location not retained. Model scope: not separately recorded. Raw value: net Width: 29.5 in | ion Configuration Refrigerator Refrigerator Type French Door ### Dimensions Cabinet Width 29.5 in Capacity 19.68 cu. ft. Depth 34.375 in Depth Closed Excluding Handles 32.25 in . The final reviewed registry supersedes this earlier audit value.
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Height To Top Of Cabinet: 67.5 in | 5 in Freezer Capacity Volume 6.34 cu. ft. Gross Weight 258 lbs H
Value used by ExactFit
67.5 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag measurement source — p.30-inch-wide-french-door-refrigerator-20-cu.-ft.mff2055frz.html Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Cabinet: 67.5 in | 5 in Freezer Capacity Volume 6.34 cu. ft. Gross Weight 258 lbs H Reviewed: 2026-09-04
Height To Top Of Cabinet: 67.5 in | 5 in Freezer Capacity Volume 6.34 cu. ft. Gross Weight 258 lbs Height 68.375 in Height To Top Of Cabinet 67.5 in Height To Top Of Door Hinge 68.375 in Net Weight 248.5 lbs Refrigerator Capacit
Height To Top Of Cabinet: 67.5 in | 5 in Freezer Capacity Volume 6.34 cu. ft. Gross Weight 258 lbs Height 68.375 in Height To Top Of Cabinet 67.5 in Height To Top Of Door Hinge 68.375 in Net Weight 248.5 lbs Refrigerator Capacit
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Height To Top Of Door Hinge: 68.38 in | cu. ft. Gross Weight 258 lbs Height 68.375 in Height To Top
Value used by ExactFit
68.38 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag measurement source — p.30-inch-wide-french-door-refrigerator-20-cu.-ft.mff2055frz.html Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Door Hinge: 68.38 in | cu. ft. Gross Weight 258 lbs Height 68.375 in Height To Top Reviewed: 2026-09-04
Height To Top Of Door Hinge: 68.38 in | cu. ft. Gross Weight 258 lbs Height 68.375 in Height To Top Of Cabinet 67.5 in Height To Top Of Door Hinge 68.375 in Net Weight 248.5 lbs Refrigerator Capacity Volume 13.34 Width 30.125 in ### Ref
Height To Top Of Door Hinge: 68.38 in | cu. ft. Gross Weight 258 lbs Height 68.375 in Height To Top Of Cabinet 67.5 in Height To Top Of Door Hinge 68.375 in Net Weight 248.5 lbs Refrigerator Capacity Volume 13.34 Width 30.125 in ### Ref
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Depth Excluding Doors: 28.0 in | epth Closed Excluding Handles 32.25 in Depth Closed Including Handl
Value used by ExactFit
28 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag measurement source — p.30-inch-wide-french-door-refrigerator-20-cu.-ft.mff2055frz.html Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Excluding Doors: 28.0 in | epth Closed Excluding Handles 32.25 in Depth Closed Including Handl Reviewed: 2026-09-04
Depth Excluding Doors: 28.0 in | epth Closed Excluding Handles 32.25 in Depth Closed Including Handles 34.375 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 44.125 in Freezer Capacity Volume 6.34 cu. ft. G
Depth Excluding Doors: 28.0 in | epth Closed Excluding Handles 32.25 in Depth Closed Including Handles 34.375 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 44.125 in Freezer Capacity Volume 6.34 cu. ft. G
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag installation document — 75281149.pdf assets.skulytics.io · Installation manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Retained specification excerpt: Depth Closed Including Handles: 34.38 in | Capacity 19.68 cu. ft. Depth 34.375 in Depth Closed Excl
Value used by ExactFit
34.38 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag measurement source — p.30-inch-wide-french-door-refrigerator-20-cu.-ft.mff2055frz.html Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Closed Including Handles: 34.38 in | Capacity 19.68 cu. ft. Depth 34.375 in Depth Closed Excl Reviewed: 2026-09-04
Depth Closed Including Handles: 34.38 in | Capacity 19.68 cu. ft. Depth 34.375 in Depth Closed Excluding Handles 32.25 in Depth Closed Including Handles 34.375 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 44.125 in Freezer Ca
Depth Closed Including Handles: 34.38 in | Capacity 19.68 cu. ft. Depth 34.375 in Depth Closed Excluding Handles 32.25 in Depth Closed Including Handles 34.375 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 44.125 in Freezer Ca
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Retained specification excerpt: Depth Excluding Doors 28 in Depth With Door Open 90: 44.12 in | epth Closed Excluding Handles 32.25
Value used by ExactFit
44.12 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag measurement source — p.30-inch-wide-french-door-refrigerator-20-cu.-ft.mff2055frz.html Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Excluding Doors 28 in Depth With Door Open 90: 44.12 in | epth Closed Excluding Handles 32.25 Reviewed: 2026-09-04
Depth Excluding Doors 28 in Depth With Door Open 90: 44.12 in | epth Closed Excluding Handles 32.25 in Depth Closed Including Handles 34.375 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 44.125 in Freezer Capacity Volume 6.34 cu. ft. Gross Weight 258 lbs Height 68.375 in Heig
Depth Excluding Doors 28 in Depth With Door Open 90: 44.12 in | epth Closed Excluding Handles 32.25 in Depth Closed Including Handles 34.375 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 44.125 in Freezer Capacity Volume 6.34 cu. ft. Gross Weight 258 lbs Height 68.375 in Heig
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Maytag measurement source — cd36d2640289ea6e77bb8188065125437563d18000b95fa278ac2cf608d254d9.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-17
Recalculated after the case width correction: printed cabinet width 30 1/8" plus the guide's 1/2" ventilation space on each side = 31 1/8 in.
Recalculated after the case width correction: printed cabinet width 30 1/8" plus the guide's 1/2" ventilation space on each side = 31 1/8 in. Calculation or inference: case_width_in + 2 * side_ventilation_clearance_in.
Other evidence found
30.5 in — superseded
www.maytag.com; location not retained. Model scope: not separately recorded. Raw value: Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 29.5 + 2 * 0.5 = 30.5 in. The final reviewed registry supersedes this earlier audit value.
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Maytag measurement source — DimensionGuide-W10405120-D-MT.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05
Minimum opening height derived from highest stored appliance endpoint 68.38 in plus documented top clearance 0.5 in.
Minimum opening height derived from highest stored appliance endpoint 68.38 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Maytag measurement source — DimensionGuide-W10405120-D-MT.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05
Minimum opening depth derived from case-only depth 28.0 in plus documented rear clearance 1.0 in.
Minimum opening depth derived from case-only depth 28.0 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MFF2055FR***
Confidence label: medium.
Primary evidence
Maytag measurement source — DimensionGuide-W10405120-D-MT.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05
1/2" space on each side Calculation or inference: documented DOE model pattern MFF2055FR***.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MFF2055FR***
Confidence label: medium.
Primary evidence
Maytag measurement source — DimensionGuide-W10405120-D-MT.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05
1/2" space on each side Calculation or inference: documented DOE model pattern MFF2055FR***.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MFF2055FR***
Confidence label: medium.
Primary evidence
Maytag measurement source — DimensionGuide-W10405120-D-MT.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05
1/2" space on each side and at the top Calculation or inference: documented DOE model pattern MFF2055FR***.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MFF2055FR***
Confidence label: medium.
Primary evidence
Maytag measurement source — DimensionGuide-W10405120-D-MT.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05
1" of space behind Calculation or inference: documented DOE model pattern MFF2055FR***.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Source not recorded Publisher not recorded · Retained document Model scope: Not established Publication/revision date: Not recorded Location: Exact location not retained Reviewed: Not recorded
No retained excerpt is available.
The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.
Why this value was used
No evidence decision recorded.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Maytag measurement source — cd36d2640289ea6e77bb8188065125437563d18000b95fa278ac2cf608d254d9.pdf Maytag · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-17
Dimension guide W10405120C (9/16), row MFF2055FR: Width - Cabinet (H) 30 1/8" (76.5 cm). Maytag CAD package P200921MX-027c_MFF2055FRZ (Dec 2020) models the cabinet body and the doors at 30 1/8 in. The previous 29 1/2 in (maytag.com "Cabinet Width") matches the MFF2055YE row. Owner decision 2026-09-17.
Dimension guide W10405120C (9/16), row MFF2055FR: Width - Cabinet (H) 30 1/8" (76.5 cm). Maytag CAD package P200921MX-027c_MFF2055FRZ (Dec 2020) models the cabinet body and the doors at 30 1/8 in. The previous 29 1/2 in (maytag.com "Cabinet Width") matches the MFF2055YE row. Owner decision 2026-09-17.
Other evidence found
29.5 in — superseded
www.maytag.com; location not retained. Model scope: not separately recorded. Raw value: Cabinet Width: 29.5 in | 30-Inch Wide French Door Refrigerator - 20 Cu. Ft. Dimensions Cabinet Width 29.5 in Capacity 19.68 cu. ft. Depth 34.375 in Depth Closed 32.25 in Depth Closed … 28 . The final reviewed registry supersedes this earlier audit value.
Selected: 31.125 in. Earlier retained values: 30.5 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Recalculated after the case width correction: printed cabinet width 30 1/8" plus the guide's 1/2" ventilation space on each side = 31 1/8 in. Calculation or inference: case_width_in + 2 * side_ventilation_clearance_in.
Model numbers covered: MFF2055FRZ. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
5 displayed measurements supported: Cabinet height; Height with hinge / controlling height; Depth without door; Depth with handle; Depth with doors open at 90°.
Availability: retained review record; original URL retained (current availability not rechecked).
Evidence reflects the sources reviewed on 2026-09-17. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.
