Measurement evidence for Maytag MFC2062FEZ

Value used by ExactFit

35.62 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — p.36-inch-wide-counter-depth-french-door-refrigerator-20-cu.-ft.mfc2062fez.html
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: net Width: 35.62 in | ion Configuration Refrigerator Refrigerator Type French Door ### Dimensions Ca
Reviewed: 2026-09-04

net Width: 35.62 in | ion Configuration Refrigerator Refrigerator Type French Door ### Dimensions Cabinet Width 35.625 in Capacity 20 cu. ft. Cutout Height 69 in Cutout Width 36 in Depth 29.5 in Depth

Why this value was used

net Width: 35.62 in | ion Configuration Refrigerator Refrigerator Type French Door ### Dimensions Cabinet Width 35.625 in Capacity 20 cu. ft. Cutout Height 69 in Cutout Width 36 in Depth 29.5 in Depth

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — p.36-inch-wide-counter-depth-french-door-refrigerator-20-cu.-ft.mfc2062fez.html
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Cabinet: 68.5 in | 3.125 in Freezer Capacity Volume 5.62 cu. ft. Gross Weight 315 l
Reviewed: 2026-09-04

Height To Top Of Cabinet: 68.5 in | 3.125 in Freezer Capacity Volume 5.62 cu. ft. Gross Weight 315 lbs Height 70 in Height To Top Of Cabinet 68.5 in Height To Top Of Door Hinge 70.125 in Net Weight 291 lbs Refrigerator Capacity

Why this value was used

Height To Top Of Cabinet: 68.5 in | 3.125 in Freezer Capacity Volume 5.62 cu. ft. Gross Weight 315 lbs Height 70 in Height To Top Of Cabinet 68.5 in Height To Top Of Door Hinge 70.125 in Net Weight 291 lbs Refrigerator Capacity

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.12 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — p.36-inch-wide-counter-depth-french-door-refrigerator-20-cu.-ft.mfc2062fez.html
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Door Hinge: 70.12 in | 5.62 cu. ft. Gross Weight 315 lbs Height 70 in Height To Top
Reviewed: 2026-09-04

Height To Top Of Door Hinge: 70.12 in | 5.62 cu. ft. Gross Weight 315 lbs Height 70 in Height To Top Of Cabinet 68.5 in Height To Top Of Door Hinge 70.125 in Net Weight 291 lbs Refrigerator Capacity Volume 14.38 Width 35.625 in ![](https

Why this value was used

Height To Top Of Door Hinge: 70.12 in | 5.62 cu. ft. Gross Weight 315 lbs Height 70 in Height To Top Of Cabinet 68.5 in Height To Top Of Door Hinge 70.125 in Net Weight 291 lbs Refrigerator Capacity Volume 14.38 Width 35.625 in ![](https

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24.12 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — p.36-inch-wide-counter-depth-french-door-refrigerator-20-cu.-ft.mfc2062fez.html
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors: 24.12 in | pth Closed Excluding Handles 26.875 in Depth Closed Including Hand
Reviewed: 2026-09-04

Depth Excluding Doors: 24.12 in | pth Closed Excluding Handles 26.875 in Depth Closed Including Handles 29.375 in Depth Excluding Doors 24.125 in Depth With Door Open 90 Degree 43.125 in Freezer Capacity Volume 5.62 cu. ft. G

Why this value was used

Depth Excluding Doors: 24.12 in | pth Closed Excluding Handles 26.875 in Depth Closed Including Handles 29.375 in Depth Excluding Doors 24.125 in Depth With Door Open 90 Degree 43.125 in Freezer Capacity Volume 5.62 cu. ft. G

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26.88 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — p.36-inch-wide-counter-depth-french-door-refrigerator-20-cu.-ft.mfc2062fez.html
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Excluding Handles: 26.88 in | 625 in Capacity 20 cu. ft. Cutout Height 69 in Cutout Wid
Reviewed: 2026-09-04

Depth Closed Excluding Handles: 26.88 in | 625 in Capacity 20 cu. ft. Cutout Height 69 in Cutout Width 36 in Depth 29.5 in Depth Closed Excluding Handles 26.875 in Depth Closed Including Handles 29.375 in Depth Excluding Doors 24.125 in Depth

Why this value was used

Depth Closed Excluding Handles: 26.88 in | 625 in Capacity 20 cu. ft. Cutout Height 69 in Cutout Width 36 in Depth 29.5 in Depth Closed Excluding Handles 26.875 in Depth Closed Including Handles 29.375 in Depth Excluding Doors 24.125 in Depth

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29.38 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — p.36-inch-wide-counter-depth-french-door-refrigerator-20-cu.-ft.mfc2062fez.html
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Including Handles: 29.38 in | 69 in Cutout Width 36 in Depth 29.5 in Depth Closed Exclu
Reviewed: 2026-09-04

Depth Closed Including Handles: 29.38 in | 69 in Cutout Width 36 in Depth 29.5 in Depth Closed Excluding Handles 26.875 in Depth Closed Including Handles 29.375 in Depth Excluding Doors 24.125 in Depth With Door Open 90 Degree 43.125 in Freeze

Why this value was used

Depth Closed Including Handles: 29.38 in | 69 in Cutout Width 36 in Depth 29.5 in Depth Closed Excluding Handles 26.875 in Depth Closed Including Handles 29.375 in Depth Excluding Doors 24.125 in Depth With Door Open 90 Degree 43.125 in Freeze

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

43.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — p.36-inch-wide-counter-depth-french-door-refrigerator-20-cu.-ft.mfc2062fez.html
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth With Door Open 90 = 43.125 in | 875 in Depth Closed Including Handles 29.375 in Depth Excludin
Reviewed: 2026-09-04

Depth With Door Open 90 = 43.125 in | 875 in Depth Closed Including Handles 29.375 in Depth Excluding Doors 24.125 in Depth With Door Open 90 Degree 43.125 in Freezer Capacity Volume 5.62 cu. ft. Gross Weight 315 lbs Height 70 in Height T

Why this value was used

Depth With Door Open 90 = 43.125 in | 875 in Depth Closed Including Handles 29.375 in Depth Excluding Doors 24.125 in Depth With Door Open 90 Degree 43.125 in Freezer Capacity Volume 5.62 cu. ft. Gross Weight 315 lbs Height 70 in Height T

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — p.36-inch-wide-counter-depth-french-door-refrigerator-20-cu.-ft.mfc2062fez.html
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cutout Width = 36.0 in | ### Dimensions Cabinet Width 35.625 in Capacity 20 cu. ft. Cutout Height 6
Reviewed: 2026-09-04

Cutout Width = 36.0 in | ### Dimensions Cabinet Width 35.625 in Capacity 20 cu. ft. Cutout Height 69 in Cutout Width 36 in Depth 29.5 in Depth Closed Excluding Handles 26.875 in Depth Closed Including H

Why this value was used

Cutout Width = 36.0 in | ### Dimensions Cabinet Width 35.625 in Capacity 20 cu. ft. Cutout Height 69 in Cutout Width 36 in Depth 29.5 in Depth Closed Excluding Handles 26.875 in Depth Closed Including H

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.62 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Maytag measurement source — dimensions-guide-43750
maytag.manymanuals.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 70.12 in plus documented top clearanc
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 70.12 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 70.12 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25.12 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Maytag measurement source — 75281144.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-05

Installation envelope: 24.12 in case depth + 1 in documented rear space = 25.12 in.

Why this value was used

Installation envelope: 24.12 in case depth + 1 in documented rear space = 25.12 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Estimate — not printed in the documents for this model.

Original published value and unit: see retained transcription below. Normalization: typical Maytag side gap (estimate)

Confidence label: low.

Primary evidence

ExactFit estimate (Maytag doesn't print this for the model)
ExactFit · Estimate
Model scope: Estimate from similar models
Publication/revision date: Not recorded
Location: Not printed for this model
Reviewed: 2026-10-29

Not printed in the Maytag documents we have for this model. 1/2 in is the side gap Maytag prints for similar models (MRFF4136RZ, MFW2055FRZ), so it is shown as an estimate. The fit check uses Maytag's cutout width for this model, so this estimate does not change the fit answer.

No document we have for this model prints this value.

Why this value was used

Not printed in the Maytag documents we have for this model. 1/2 in is the side gap Maytag prints for similar models (MRFF4136RZ, MFW2055FRZ), so it is shown as an estimate. The fit check uses Maytag's cutout width for this model, so this estimate does not change the fit answer.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Estimate — not printed in the documents for this model.

Original published value and unit: see retained transcription below. Normalization: typical Maytag side gap (estimate)

Confidence label: low.

Primary evidence

ExactFit estimate (Maytag doesn't print this for the model)
ExactFit · Estimate
Model scope: Estimate from similar models
Publication/revision date: Not recorded
Location: Not printed for this model
Reviewed: 2026-10-29

Not printed in the Maytag documents we have for this model. 1/2 in is the side gap Maytag prints for similar models (MRFF4136RZ, MFW2055FRZ), so it is shown as an estimate. The fit check uses Maytag's cutout width for this model, so this estimate does not change the fit answer.

No document we have for this model prints this value.

Why this value was used

Not printed in the Maytag documents we have for this model. 1/2 in is the side gap Maytag prints for similar models (MRFF4136RZ, MFW2055FRZ), so it is shown as an estimate. The fit check uses Maytag's cutout width for this model, so this estimate does not change the fit answer.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag measurement source — dimensions-guide-43750
maytag.manymanuals.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: 1.25 cm) space on each side and at the top
Reviewed: 2026-09-05

1.25 cm) space on each side and at the top

Why this value was used

1.25 cm) space on each side and at the top

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: shared Maytag 20 cu ft French-door installation platform

Confidence label: medium.

Primary evidence

Maytag measurement source — 75281144.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-05

Documented Maytag 20 cu ft French-door platform: allow 1" (2.54 cm) space behind the refrigerator.

Why this value was used

Documented Maytag 20 cu ft French-door platform: allow 1" (2.54 cm) space behind the refrigerator. Calculation or inference: shared Maytag 20 cu ft French-door installation platform.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — 82594556.pdf
maytag.manymanuals.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-18

Dimension guide: next to a fixed wall, leave 3 3/4" minimum to allow the door to swing open; door angle not stated, so the 90-degree value (owner rule 2026-09-17). Replaces a web listing value of 4 in.

Why this value was used

Dimension guide: next to a fixed wall, leave 3 3/4" minimum to allow the door to swing open; door angle not stated, so the 90-degree value (owner rule 2026-09-17). Replaces a web listing value of 4 in.

Other evidence found

• 4 in — superseded

  maytag.manymanuals.com; location not retained. Model scope: not separately recorded. Raw value: Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave 3 3 ⁄4" (9.5 cm. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — p.36-inch-wide-counter-depth-french-door-refrigerator-20-cu.-ft.mfc2062fez.html
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width = 35.625 in | eration Configuration Refrigerator Refrigerator Type French Door ### Dim
Reviewed: 2026-09-04

Cabinet Width = 35.625 in | eration Configuration Refrigerator Refrigerator Type French Door ### Dimensions Cabinet Width 35.625 in Capacity 20 cu. ft. Cutout Height 69 in Cutout Width 36 in Depth 29.5 in Depth

Why this value was used

Cabinet Width = 35.625 in | eration Configuration Refrigerator Refrigerator Type French Door ### Dimensions Cabinet Width 35.625 in Capacity 20 cu. ft. Cutout Height 69 in Cutout Width 36 in Depth 29.5 in Depth

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.