Measurement evidence for LG LTCS20030S

Value used by ExactFit

29.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from LTCS20020B

Confidence label: medium.

Primary evidence

LG measurement source — 90111431.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Medium-confidence chassis inference from LTCS20020B. Donors unanimously report width_doors_closed_in=29.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Width 29 3/4"

Why this value was used

Medium-confidence chassis inference from LTCS20020B. Donors unanimously report width_doors_closed_in=29.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Width 29 3/4" Calculation or inference: same-brand product-class chassis propagation from LTCS20020B.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — LG_Specs_990343450.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Height to Top of Case = 65 1/2" | Height to Top of Case | 65 1/2" | Height to Top of Door Hinge

Why this value was used

Height to Top of Case = 65 1/2" | Height to Top of Case | 65 1/2" | Height to Top of Door Hinge

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — LTCS20030S-LG-Builder-Spec-Sheet.pdf
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Height to Top of Hinge = 66.1" | Height to Top of Hinge | 66.1" (1,679 mm) | E

Why this value was used

Height to Top of Hinge = 66.1" | Height to Top of Hinge | 66.1" (1,679 mm) | E

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — LG_Specs_990343450.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth without Door = 29" | Depth without Door | 29" | Depth (Total with Door Open)

Why this value was used

Depth without Door = 29" | Depth without Door | 29" | Depth (Total with Door Open)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33.38 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — LTCS20030S-LG-Builder-Spec-Sheet.pdf
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without Handles: 33.38 in | ILDER 2 of 2 10/23 DIMENSIONS / CLEARANCES / WEIGHTS Depth with Ha
Reviewed: 2026-09-04

Depth without Handles: 33.38 in | ILDER 2 of 2 10/23 DIMENSIONS / CLEARANCES / WEIGHTS Depth with Handles 33 3/8" Depth without Handles 33 3/8" Depth without Door 29" Depth (Total with Door Open) 60" Height to Top of Case 6

Why this value was used

Depth without Handles: 33.38 in | ILDER 2 of 2 10/23 DIMENSIONS / CLEARANCES / WEIGHTS Depth with Handles 33 3/8" Depth without Handles 33 3/8" Depth without Door 29" Depth (Total with Door Open) 60" Height to Top of Case 6

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.38 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — LTCS20030S-LG-Builder-Spec-Sheet.pdf
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with Handles: 33.38 in | CS20030S F E I F I G B A BUILDER 2 of 2 10/23 DIMENSIONS / CLEARANCES
Reviewed: 2026-09-04

Depth with Handles: 33.38 in | CS20030S F E I F I G B A BUILDER 2 of 2 10/23 DIMENSIONS / CLEARANCES / WEIGHTS Depth with Handles 33 3/8" Depth without Handles 33 3/8" Depth without Door 29" Depth (Total with Door Ope

Why this value was used

Depth with Handles: 33.38 in | CS20030S F E I F I G B A BUILDER 2 of 2 10/23 DIMENSIONS / CLEARANCES / WEIGHTS Depth with Handles 33 3/8" Depth without Handles 33 3/8" Depth without Door 29" Depth (Total with Door Ope

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

60.3 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — LTCS20030S-LG-Builder-Spec-Sheet.pdf
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth (Total with Door Open 90°: 60.3 in | hout Door 29.5" (749.5 mm) G Door Edge Clearance (Door Op
Reviewed: 2026-09-04

Depth (Total with Door Open 90°: 60.3 in | hout Door 29.5" (749.5 mm) G Door Edge Clearance (Door Open 90°) 2" (50.8 mm) H Depth (Total with Door Open 90°) 60.3" (1,530.4 mm) INSTALLATION NOTES •  The installation location chosen for the re

Why this value was used

Depth (Total with Door Open 90°: 60.3 in | hout Door 29.5" (749.5 mm) G Door Edge Clearance (Door Open 90°) 2" (50.8 mm) H Depth (Total with Door Open 90°) 60.3" (1,530.4 mm) INSTALLATION NOTES •  The installation location chosen for the re

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * exact-model installation side clearance

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

LG measurement source — LG_Specs_990343450.pdf + 2020-04-28-15-33-21.pdf + LTCS20030S-LG-Builder-Spec-Sheet.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Derived minimum opening width: 29.75 + 2 x 2 = 33.75 in. Exact-model clearance evidence: Back, Top and Side Clearance 2"; Back, Top and Side Clearance | 2"; Installation Clearance Sides 2"; Installation Clearance | Sides 2"; Installation Clearances Sides 2"; Installation Clearances | Sides 2"

Why this value was used

Derived minimum opening width: 29.75 + 2 x 2 = 33.75 in. Exact-model clearance evidence: Back, Top and Side Clearance 2"; Back, Top and Side Clearance | 2"; Installation Clearance Sides 2"; Installation Clearance | Sides 2"; Installation Clearances Sides 2"; Installation Clearances | Sides 2" Calculation or inference: width_doors_closed_in + 2 * exact-model installation side clearance.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

LG measurement source — LTCS20030S-LG-Builder-Spec-Sheet.pdf
LG · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 66.1 in plus documented top clearance 2.0 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 66.1 in plus documented top clearance 2.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

LG measurement source — LG_Specs_990343450.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.0 in plus documented rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 29.0 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — LTCS20030S-LG-Builder-Spec-Sheet.pdf
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Installation Clearance Sides = 2" | 2" | Installation Clearance Sides 2", Top 2", Back 2" | Approx. Weight (Product /

Why this value was used

Installation Clearance Sides = 2" | 2" | Installation Clearance Sides 2", Top 2", Back 2" | Approx. Weight (Product /

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — LTCS20030S-LG-Builder-Spec-Sheet.pdf
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Installation Clearance Sides = 2" | 2" | Installation Clearance Sides 2", Top 2", Back 2" | Approx. Weight (Product /

Why this value was used

Installation Clearance Sides = 2" | 2" | Installation Clearance Sides 2", Top 2", Back 2" | Approx. Weight (Product /

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — LTCS20030S-LG-Builder-Spec-Sheet.pdf
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Installation Clearance Sides = 2" | 2" | Installation Clearance Sides 2", Top 2", Back 2" | Approx. Weight (Product /

Why this value was used

Installation Clearance Sides = 2" | 2" | Installation Clearance Sides 2", Top 2", Back 2" | Approx. Weight (Product /

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

LG measurement source — LG_Specs_990343450.pdf
s7d2.scene7.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

M Back Clearance | 2" | Installation Clearances

Why this value was used

M Back Clearance | 2" | Installation Clearances

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — 60d2c12dca7efcd1e9e78a75e60b3c430425f28dcb1f15487b8f5933fd7c0136.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-27

Printed 2 in beside the door open at 90 degrees; the hinge side is reversible. The sheet names this model.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

Printed 2 in beside the door open at 90 degrees; the hinge side is reversible. The sheet names this model.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29.75 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from LTCS20020B

Confidence label: medium.

Primary evidence

LG measurement source — 90111431.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Medium-confidence chassis inference from LTCS20020B. Donors unanimously report case_width_in=29.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Width 29 3/4"

Why this value was used

Medium-confidence chassis inference from LTCS20020B. Donors unanimously report case_width_in=29.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Width 29 3/4" Calculation or inference: same-brand product-class chassis propagation from LTCS20020B.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.