This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-10-22. 6 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row says where its value comes from.
Measurements and supporting evidence
Measurement
Value used
Evidence status
Primary source
Location
Details
Overall width
30 in
✓ Conflicting sources — resolved
LG measurement source — LTCS20020W LG
Retained specification excerpt: LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal
Value used by ExactFit
30 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
LG measurement source — LTCS20020W LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal Reviewed: 2026-10-22
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Plain exact-model specification row: Width = 30.0 in | Freezer Refrigerator Model: LTCS20020W | | | | --- | --- | | Brand | LG | | Model # | LTCS20020W | | Width | 30 in. | | Height | 68.5 in. | | Depth | 35.6 in. | $745.00 $949.00You save $204.00 (21%) or$63/mo suggested payments with 12- Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Plain exact-model specification row: Width = 30.0 in | Freezer Refrigerator Model: LTCS20020W | | | | --- | --- | | Brand | LG | | Model # | LTCS20020W | | Width | 30 in. | | Height | 68.5 in. | | Depth | 35.6 in. | $745.00 $949.00You save $204.00 (21%) or$63/mo suggested payments with 12- Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
Other evidence found
29.92126 in — superseded
Document lg-ltcs20020s.json; page 13. Model scope: not separately recorded. Raw value: B Width 29 7/8 in (760 mm). The final reviewed registry supersedes this earlier audit value.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
LG measurement source — LTCS20020_-LG-Builder-Spec-Sheet.pdf LG
Page 2
Value used by ExactFit
65.625 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
LG measurement source — LTCS20020_-LG-Builder-Spec-Sheet.pdf LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-10-22
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Exact-model official builder sheet: Height to Top of Case 65.6 in (1,666.9 mm); 1,666.9 mm = 65.62598 in, confirming 65 5/8 in and rejecting the malformed OCR fraction 65 11/22. Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Exact-model official builder sheet: Height to Top of Case 65.6 in (1,666.9 mm); 1,666.9 mm = 65.62598 in, confirming 65 5/8 in and rejecting the malformed OCR fraction 65 11/22. Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
Other evidence found
65.354330709 in — superseded
Document lg-ltcs20020s.json; page 13. Model scope: not separately recorded. Raw value: C Height to Top of Case 65 3/8 in (1660 mm). The final reviewed registry supersedes this earlier audit value.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
LG measurement source — 90111431.pdf LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-10-22
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020B's evidence, is used for every finish. LTCS20020B raw: Height to Top of Door Hinge
66 1/8" Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020B's evidence, is used for every finish. LTCS20020B raw: Height to Top of Door Hinge
66 1/8" Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
Other evidence found
65.984252 in — superseded
Document lg-ltcs20020s.json; page 13. Model scope: not separately recorded. Raw value: D Height to Top of Hinge 66 in (1676 mm). The final reviewed registry supersedes this earlier audit value.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
LG measurement source — lg-ltcs20020s.json LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 13 Reviewed: 2026-09-09
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal
Value used by ExactFit
33.75 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
LG measurement source — LTCS20020W LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal Reviewed: 2026-10-22
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Depth Without Handles = 33.75 in | LTCS20020W | All Make Appliance Depth With Handles33.75" Depth Without Door29" Depth Without Handles33.75" ## Similar Refrigerators 29 Cu. Ft. Smart Standard-depth Max™ 4-door French Doo Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Depth Without Handles = 33.75 in | LTCS20020W | All Make Appliance Depth With Handles33.75" Depth Without Door29" Depth Without Handles33.75" ## Similar Refrigerators 29 Cu. Ft. Smart Standard-depth Max™ 4-door French Doo Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
Other evidence found
33.700787402 in — superseded
Document lg-ltcs20020s.json; page 13. Model scope: not separately recorded. Raw value: A Depth without Handle 33 3/4 in (856 mm). The final reviewed registry supersedes this earlier audit value.
Effect on fit result
This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Retained specification excerpt: Depth with Handles 33.75 in
Value used by ExactFit
33.75 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
LG measurement source — lg-ltcs20020s.json LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth with Handles 33.75 in Reviewed: 2026-09-09
LG measurement source — LTCS20020_-LG-Builder-Spec-Sheet.pdf LG
Page 2
Value used by ExactFit
60.3 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
LG measurement source — LTCS20020_-LG-Builder-Spec-Sheet.pdf LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-10-22
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Exact family LG Builder sheet page 2 diagram: H Depth (Total with Door Open 90°) = 60.3 in Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Exact family LG Builder sheet page 2 diagram: H Depth (Total with Door Open 90°) = 60.3 in Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
Other evidence found
60.236220472 in — superseded
Document lg-ltcs20020s.json; page 13. Model scope: not separately recorded. Raw value: G Depth (Total with Door Open 90 degrees) 60 1/4 in (1530 mm). The final reviewed registry supersedes this earlier audit value.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
LG measurement source — LTCS20020_-LG-Builder-Spec-Sheet.pdf + 637163-lg-ltcs20020w LG
Page 2
Value used by ExactFit
34 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * exact-model installation side clearance
LG measurement source — LTCS20020_-LG-Builder-Spec-Sheet.pdf + 637163-lg-ltcs20020w LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-10-22
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Derived minimum opening width: 30 + 2 x 2 = 34 in. Exact-model clearance evidence: Back, Top and Side Clearance 2"; Installation Clearance Sides 2"; Installation Clearance Sides: 2" Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Derived minimum opening width: 30 + 2 x 2 = 34 in. Exact-model clearance evidence: Back, Top and Side Clearance 2"; Installation Clearance Sides 2"; Installation Clearance Sides: 2" Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md). Calculation or inference: width_doors_closed_in + 2 * exact-model installation side clearance.
Other evidence found
33.92126 in — superseded
Document lg-ltcs20020s.json; page 13. Model scope: not separately recorded. Raw value: {"calculation": "width_doors_closed_in + 2 * side_ventilation_clearance_in", "operands": {"side_ventilation_clearance_in": [{"cache_path": "data/truth-set/lg-ltcs20020s.json", "page": "Specifications - Dimensions/Clearances/Weights", "raw": "Installation Clearance: Sides 2 in", "source_url": "https://www.lg.com/us/refrigerators/lg-ltcs20020s-top-freezer-refrigerator", "value_in": 2.0}], "width_doors_closed_in": [{"cache_path": "data/truth-set/lg-ltcs20020s.json", "page": 13, "raw": "B Width 29 7/8 in (760 mm)", "source_url": "https://gscs-manual.lge.com/CNZ/MFL72031101/en-us/main.html", "value_in": 29.921259843}]}, "result_in": 33.92126}. The final reviewed registry supersedes this earlier audit value.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
LG measurement source — 90111431.pdf LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-10-22
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020B's evidence, is used for every finish. LTCS20020B raw: Minimum opening height derived from highest stored appliance endpoint 66.125 in plus documented top clearance 2.0 in. Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020B's evidence, is used for every finish. LTCS20020B raw: Minimum opening height derived from highest stored appliance endpoint 66.125 in plus documented top clearance 2.0 in. Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md). Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.
Other evidence found
67.984252 in — superseded
Document lg-ltcs20020s.json; page 13. Model scope: not separately recorded. Raw value: {"calculation": "65.984252 + top_clearance_in", "operands": {"height_hinge_in": [{"cache_path": "data/truth-set/lg-ltcs20020s.json", "page": 13, "raw": "D Height to Top of Hinge 66 in (1676 mm)", "source_url": "https://gscs-manual.lge.com/CNZ/MFL72031101/en-us/main.html", "value_in": 65.984251969}], "top_clearance_in": [{"cache_path": "data/truth-set/lg-ltcs20020s.json", "page": "Specifications - Dimensions/Clearances/Weights", "raw": "Installation Clearance: Top 2 in", "source_url": "https://www.lg.com/us/refrigerators/lg-ltcs20020s-top-freezer-refrigerator", "value_in": 2.0}]}, "result_in": 67.984252}. The final reviewed registry supersedes this earlier audit value.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
LG measurement source — lg-ltcs20020s.json LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 13 Reviewed: 2026-09-09
{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "data/truth-set/lg-ltcs20020s.json", "page": 13, "raw": "F Depth without Door 29 1/2 in (748 mm)", "source_url": "https://gscs-manual.lge.com/CNZ/MFL72031101/en-us/main.html", "value_in": 29.448818898}], "rear_clearance_in": [{"cache_path": "data/truth-set/lg-ltcs20020s.json", "page": "Specifications - Dimensions/Clearances/Weights", "raw": "Installation Clearance: Back 2 in", "source_url": "https://www.lg.com/us/refrigerators/lg-ltcs20020s-top-freezer-refrigerator", "value_in": 2.0}]}, "result_in": 31.448819} Calculation or inference: depth_case_only_in + rear_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Installation Clearance: Sides 2 in
Value used by ExactFit
2 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
LG measurement source — lg-ltcs20020s.json LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Installation Clearance: Sides 2 in Reviewed: 2026-09-09
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Installation Clearance: Sides 2 in
Value used by ExactFit
2 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
LG measurement source — lg-ltcs20020s.json LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Installation Clearance: Sides 2 in Reviewed: 2026-09-09
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Installation Clearance: Top 2 in
Value used by ExactFit
2 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
LG measurement source — lg-ltcs20020s.json LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Installation Clearance: Top 2 in Reviewed: 2026-09-09
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Installation Clearance: Back 2 in
Value used by ExactFit
2 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
LG measurement source — lg-ltcs20020s.json LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Installation Clearance: Back 2 in Reviewed: 2026-09-09
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
LG measurement source — web-e8cc8d906e.pdf Publisher not recorded
Page 2
Value used by ExactFit
2 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
LG measurement source — web-e8cc8d906e.pdf Publisher not recorded · Retained document Model scope: Not established Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-10-15
LTCS20020 Builder spec sheet: "Door Edge Clearance with Handle 2"" (door open 90°).
The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.
Why this value was used
LTCS20020 Builder spec sheet: "Door Edge Clearance with Handle 2"" (door open 90°).
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Source not recorded Publisher not recorded · Retained document Model scope: Not established Publication/revision date: Not recorded Location: Exact location not retained Reviewed: Not recorded
No retained excerpt is available.
The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.
Why this value was used
No evidence decision recorded.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
LG measurement source — LTCS20020W LG · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal Reviewed: 2026-10-22
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Same-appliance endpoint inference: case width equals exact stored closed width 30 in; manufacturer does not label a separate case-width endpoint. Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Same-appliance endpoint inference: case width equals exact stored closed width 30 in; manufacturer does not label a separate case-width endpoint. Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md). Calculation or inference: case_width_in = width_doors_closed_in.
Other evidence found
29.921259843 in — superseded
Document lg-ltcs20020s.json; page 13. Model scope: not separately recorded. Raw value: B Width 29 7/8 in (760 mm). The final reviewed registry supersedes this earlier audit value.
Effect on fit result
This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Selected: 30 in. Earlier retained values: 29.92126 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Plain exact-model specification row: Width = 30.0 in | Freezer Refrigerator Model: LTCS20020W | | | | --- | --- | | Brand | LG | | Model # | LTCS20020W | | Width | 30 in. | | Height | 68.5 in. | | Depth | 35.6 in. | $745.00 $949.00You save $204.00 (21%) or$63/mo suggested payments with 12- Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
Selected: 65.625 in. Earlier retained values: 65.354330709 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Exact-model official builder sheet: Height to Top of Case 65.6 in (1,666.9 mm); 1,666.9 mm = 65.62598 in, confirming 65 5/8 in and rejecting the malformed OCR fraction 65 11/22. Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
Selected: 66.125 in. Earlier retained values: 65.984252 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020B's evidence, is used for every finish. LTCS20020B raw: Height to Top of Door Hinge
66 1/8" Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
Selected: 33.75 in. Earlier retained values: 33.700787402 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Depth Without Handles = 33.75 in | LTCS20020W | All Make Appliance Depth With Handles33.75" Depth Without Door29" Depth Without Handles33.75" ## Similar Refrigerators 29 Cu. Ft. Smart Standard-depth Max™ 4-door French Doo Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
Selected: 60.3 in. Earlier retained values: 60.236220472 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Exact family LG Builder sheet page 2 diagram: H Depth (Total with Door Open 90°) = 60.3 in Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).
Selected: 34 in. Earlier retained values: 33.92126 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Derived minimum opening width: 30 + 2 x 2 = 34 in. Exact-model clearance evidence: Back, Top and Side Clearance 2"; Installation Clearance Sides 2"; Installation Clearance Sides: 2" Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md). Calculation or inference: width_doors_closed_in + 2 * exact-model installation side clearance.
Selected: 68.125 in. Earlier retained values: 67.984252 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020B's evidence, is used for every finish. LTCS20020B raw: Minimum opening height derived from highest stored appliance endpoint 66.125 in plus documented top clearance 2.0 in. Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md). Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.
Selected: 30 in. Earlier retained values: 29.921259843 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
LG's three sources for LTCS20020 round the same fridge differently (manual mm, builder-sheet decimal and fraction tables); the largest figure, from LTCS20020W's evidence, is used for every finish. LTCS20020W raw: Same-appliance endpoint inference: case width equals exact stored closed width 30 in; manufacturer does not label a separate case-width endpoint. Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md). Calculation or inference: case_width_in = width_doors_closed_in.
Evidence reflects the sources reviewed on 2026-10-22. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.
