Measurement evidence for LG LRFLC2716D

Value used by ExactFit

35.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-platform family propagation (LRFLC27) from LRFLC2706S

Confidence label: medium.

Primary evidence

LG LRFLC2706S Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Unanimous same-platform value 35.75 in from LRFLC2706S; at least three populated dimensions match and none conflict. Donor evidence: Width 35 3/4"

Why this value was used

Unanimous same-platform value 35.75 in from LRFLC2706S; at least three populated dimensions match and none conflict. Donor evidence: Width 35 3/4" Calculation or inference: same-platform family propagation (LRFLC27) from LRFLC2706S.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

LRFLC2716D French Door Refrigerators | South Carolina | Warehouse
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height to Top of Case = 68.875 in | pth without Handles | 29.25" | | Door Edge Clearance without Han
Reviewed: 2026-09-04

Height to Top of Case = 68.875 in | pth without Handles | 29.25" | | Door Edge Clearance without Handle | 2.25" | | Height to Top of Case | 68.87" | | Installation Clearance | Sides 1/8", Top 1", Back 2" | | Weight (Unit/Carto | independent cached support: appliancehomestore.com, handlersappliance.com

Why this value was used

Height to Top of Case = 68.875 in | pth without Handles | 29.25" | | Door Edge Clearance without Handle | 2.25" | | Height to Top of Case | 68.87" | | Installation Clearance | Sides 1/8", Top 1", Back 2" | | Weight (Unit/Carto | independent cached support: appliancehomestore.com, handlersappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-platform family propagation (LRFLC27) from LRFLC2706S

Confidence label: medium.

Primary evidence

LG LRFLC2706S Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Unanimous same-platform value 70.25 in from LRFLC2706S; at least three populated dimensions match and none conflict. Donor evidence: Height to Top of Door Hinge 70 1/4"

Why this value was used

Unanimous same-platform value 70.25 in from LRFLC2706S; at least three populated dimensions match and none conflict. Donor evidence: Height to Top of Door Hinge 70 1/4" Calculation or inference: same-platform family propagation (LRFLC27) from LRFLC2706S.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

27 cu. ft. French Door Refrigerator - LRFLC2716D | LG USA
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without Door = 24.75 in | andle) 48.87" Depth (to Hinge Cover) 18.25" Depth (Total with Door O
Reviewed: 2026-09-04

Depth without Door = 24.75 in | andle) 48.87" Depth (to Hinge Cover) 18.25" Depth (Total with Door Open) 43.62" Depth without Door 24.75" Depth without Handles 29.25" Door Edge Clearance without Handle 2.25" Height to

Why this value was used

Depth without Door = 24.75 in | andle) 48.87" Depth (to Hinge Cover) 18.25" Depth (Total with Door Open) 43.62" Depth without Door 24.75" Depth without Handles 29.25" Door Edge Clearance without Handle 2.25" Height to

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

27 cu. ft. French Door Refrigerator - LRFLC2716D | LG USA
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without Handles = 29.25 in | nge Cover) 18.25" Depth (Total with Door Open) 43.62" Depth witho
Reviewed: 2026-09-04

Depth without Handles = 29.25 in | nge Cover) 18.25" Depth (Total with Door Open) 43.62" Depth without Door 24.75" Depth without Handles 29.25" Door Edge Clearance without Handle 2.25" Height to Top of Case 68.87" Installat

Why this value was used

Depth without Handles = 29.25 in | nge Cover) 18.25" Depth (Total with Door Open) 43.62" Depth without Door 24.75" Depth without Handles 29.25" Door Edge Clearance without Handle 2.25" Height to Top of Case 68.87" Installat

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

31.625 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-platform family propagation (LRFLC27) from LRFLC2706S

Confidence label: medium.

Primary evidence

LG LRFLC2706S Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Unanimous same-platform value 31.625 in from LRFLC2706S; at least three populated dimensions match and none conflict. Donor evidence: Depth with Handles 31 5/8"

Why this value was used

Unanimous same-platform value 31.625 in from LRFLC2706S; at least three populated dimensions match and none conflict. Donor evidence: Depth with Handles 31 5/8" Calculation or inference: same-platform family propagation (LRFLC27) from LRFLC2706S.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

43.625 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-platform family propagation (LRFLC27) from LRFLC2706S

Confidence label: medium.

Primary evidence

LG LRFLC2706S Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Unanimous same-platform value 43.625 in from LRFLC2706S; at least three populated dimensions match and none conflict. Donor evidence: Depth (Total with Door Open) 43 5/8"

Why this value was used

Unanimous same-platform value 43.625 in from LRFLC2706S; at least three populated dimensions match and none conflict. Donor evidence: Depth (Total with Door Open) 43 5/8" Calculation or inference: same-platform family propagation (LRFLC27) from LRFLC2706S.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-platform family propagation (LRFLC27) from LRFLC2706S

Confidence label: medium.

Primary evidence

LG measurement source — https://www.lg.com/us/support/products/documents/LRFLC2706_2025_Spec_Sheet_Refrigerator_100825.pdf
LG · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Unanimous same-platform value 36.0 in from LRFLC2706S; at least three populated dimensions match and
Reviewed: 2026-09-04

Unanimous same-platform value 36.0 in from LRFLC2706S; at least three populated dimensions match and none conflict. Donor evidence: Reviewed appliance width (Width 35 3/4") plus reviewed per-side installation clearance (Installation Clearance: Sides 1/8 in, Top 1 in, Back 2 in); width_doors_closed_in + 2 * side_clearance_wall_in = 36.0 in

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 36 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

71.25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

27 cu. ft. French Door Refrigerator - LRFLC2716D | LG USA
LG · Web source
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening height derived from highest stored appliance endpoint 70.25 in plus documented top c
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 70.25 in plus documented top clearance 1.0 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 70.25 in plus documented top clearance 1.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

27 cu. ft. French Door Refrigerator - LRFLC2716D | LG USA
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening depth derived from case-only depth 24.75 in plus documented rear clearance 2.0 in.
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 24.75 in plus documented rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 24.75 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

27 cu. ft. French Door Refrigerator - LRFLC2716D | LG USA
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Installation Clearance Sides 1/8", Top 1", Back 2"
Reviewed: 2026-09-05

Installation Clearance Sides 1/8", Top 1", Back 2"

Why this value was used

Installation Clearance Sides 1/8", Top 1", Back 2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

27 cu. ft. French Door Refrigerator - LRFLC2716D | LG USA
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Installation Clearance Sides 1/8", Top 1", Back 2"
Reviewed: 2026-09-05

Installation Clearance Sides 1/8", Top 1", Back 2"

Why this value was used

Installation Clearance Sides 1/8", Top 1", Back 2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

27 cu. ft. French Door Refrigerator - LRFLC2716D | LG USA
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Installation Clearance Sides 1/8", Top 1", Back 2"
Reviewed: 2026-09-05

Installation Clearance Sides 1/8", Top 1", Back 2"

Why this value was used

Installation Clearance Sides 1/8", Top 1", Back 2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: Direct explicit rear/back-clearance value in stored evidence

Confidence label: high.

Primary evidence

27 cu. ft. French Door Refrigerator - LRFLC2716D | LG USA
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Explicit rear/back clearance recovered from stored reviewed evidence. Installation Clearance Sides 1
Reviewed: 2026-09-05

Explicit rear/back clearance recovered from stored reviewed evidence. Installation Clearance Sides 1/8", Top 1", Back 2"

Why this value was used

Explicit rear/back clearance recovered from stored reviewed evidence. Installation Clearance Sides 1/8", Top 1", Back 2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

4.5 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: LG chassis/family donor LRFLC2706S: LRFLC finish/feature sibling; seven matching dimensions

Confidence label: medium.

Primary evidence

LG LRFLC2706S Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Documented LG family/chassis propagation from LRFLC2706S: LRFLC finish/feature sibling; seven matching dimensions; donor door-edge clearance = 4.5 in.

Why this value was used

Documented LG family/chassis propagation from LRFLC2706S: LRFLC finish/feature sibling; seven matching dimensions; donor door-edge clearance = 4.5 in. Calculation or inference: LG chassis/family donor LRFLC2706S: LRFLC finish/feature sibling; seven matching dimensions.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.75 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-platform family propagation (LRFLC27) from LRFLC2706S

Confidence label: medium.

Primary evidence

LG LRFLC2706S Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Unanimous same-platform value 35.75 in from LRFLC2706S; at least three populated dimensions match and none conflict. Donor evidence: Width 35 3/4"

Why this value was used

Unanimous same-platform value 35.75 in from LRFLC2706S; at least three populated dimensions match and none conflict. Donor evidence: Width 35 3/4" Calculation or inference: same-platform family propagation (LRFLC27) from LRFLC2706S.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

0.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

27 cu. ft. French Door Refrigerator - LRFLC2716D | LG USA
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Installation Clearance Sides 1/8", Top 1", Back 2"
Reviewed: 2026-09-04

Installation Clearance Sides 1/8", Top 1", Back 2"

Why this value was used

Installation Clearance Sides 1/8", Top 1", Back 2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.