Measurement evidence for LG LRDCS2603S

Value used by ExactFit

32.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Width 32 3/4 in

Why this value was used

Width 32 3/4 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Height to Top of Case 68 1/2 in

Why this value was used

Height to Top of Case 68 1/2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Height to Top of Door Hinge 69 7/8 in

Why this value was used

Height to Top of Door Hinge 69 7/8 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Depth without Door 29 1/2 in

Why this value was used

Depth without Door 29 1/2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Depth without Handles 33 5/8 in

Why this value was used

Depth without Handles 33 5/8 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Depth with Handles 35 in

Why this value was used

Depth with Handles 35 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

63.25 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Depth Total with Door Open 90 degrees 63 1/4 in

Why this value was used

Depth Total with Door Open 90 degrees 63 1/4 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * side_ventilation_clearance_in

Confidence label: high.

Calculation inputs: Overall width; Left-side ventilation clearance;

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

{"calculation": "width_doors_closed_in + 2 * side_ventilation_clearance_in", "operands": {"side_ventilation_clearance_in": [{"cache_path": "data/truth-set/lg-lrdcs2603s.json", "page": 2, "raw": "Installation Clearance Sides 2 in", "source_url": "https://www.lg.com/us/business/download/resources/CT00021979/LRDCS2603_LG_Pro_Builder_Spec_Sheet_101425%5B20251031_215341%5D.pdf", "value_in": 2.0}], "width_doors_closed_in": [{"cache_path": "data/truth-set/lg-lrdcs2603s.json", "page": 2, "raw": "Width 32 3/4 in", "source_url": "https://www.lg.com/us/business/download/resources/CT00021979/LRDCS2603_LG_Pro_Builder_Spec_Sheet_101425%5B20251031_215341%5D.pdf", "value_in": 32.75}]}, "result_in": 36.75}

Why this value was used

{"calculation": "width_doors_closed_in + 2 * side_ventilation_clearance_in", "operands": {"side_ventilation_clearance_in": [{"cache_path": "data/truth-set/lg-lrdcs2603s.json", "page": 2, "raw": "Installation Clearance Sides 2 in", "source_url": "https://www.lg.com/us/business/download/resources/CT00021979/LRDCS2603_LG_Pro_Builder_Spec_Sheet_101425%5B20251031_215341%5D.pdf", "value_in": 2.0}], "width_doors_closed_in": [{"cache_path": "data/truth-set/lg-lrdcs2603s.json", "page": 2, "raw": "Width 32 3/4 in", "source_url": "https://www.lg.com/us/business/download/resources/CT00021979/LRDCS2603_LG_Pro_Builder_Spec_Sheet_101425%5B20251031_215341%5D.pdf", "value_in": 32.75}]}, "result_in": 36.75} Calculation or inference: width_doors_closed_in + 2 * side_ventilation_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

71.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 69.875 + top_clearance_in

Confidence label: high.

Calculation inputs: Top clearance;

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

{"calculation": "69.875 + top_clearance_in", "operands": {"height_hinge_in": [{"cache_path": "data/truth-set/lg-lrdcs2603s.json", "page": 2, "raw": "Height to Top of Door Hinge 69 7/8 in", "source_url": "https://www.lg.com/us/business/download/resources/CT00021979/LRDCS2603_LG_Pro_Builder_Spec_Sheet_101425%5B20251031_215341%5D.pdf", "value_in": 69.875}], "top_clearance_in": [{"cache_path": "data/truth-set/lg-lrdcs2603s.json", "page": 2, "raw": "Installation Clearance Top 2 in", "source_url": "https://www.lg.com/us/business/download/resources/CT00021979/LRDCS2603_LG_Pro_Builder_Spec_Sheet_101425%5B20251031_215341%5D.pdf", "value_in": 2.0}]}, "result_in": 71.875}

Why this value was used

{"calculation": "69.875 + top_clearance_in", "operands": {"height_hinge_in": [{"cache_path": "data/truth-set/lg-lrdcs2603s.json", "page": 2, "raw": "Height to Top of Door Hinge 69 7/8 in", "source_url": "https://www.lg.com/us/business/download/resources/CT00021979/LRDCS2603_LG_Pro_Builder_Spec_Sheet_101425%5B20251031_215341%5D.pdf", "value_in": 69.875}], "top_clearance_in": [{"cache_path": "data/truth-set/lg-lrdcs2603s.json", "page": 2, "raw": "Installation Clearance Top 2 in", "source_url": "https://www.lg.com/us/business/download/resources/CT00021979/LRDCS2603_LG_Pro_Builder_Spec_Sheet_101425%5B20251031_215341%5D.pdf", "value_in": 2.0}]}, "result_in": 71.875} Calculation or inference: 69.875 + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "data/truth-set/lg-lrdcs2603s.json", "page": 2, "raw": "Depth without Door 29 1/2 in", "source_url": "https://www.lg.com/us/business/download/resources/CT00021979/LRDCS2603_LG_Pro_Builder_Spec_Sheet_101425%5B20251031_215341%5D.pdf", "value_in": 29.5}], "rear_clearance_in": [{"cache_path": "data/truth-set/lg-lrdcs2603s.json", "page": 2, "raw": "Installation Clearance Back 2 in", "source_url": "https://www.lg.com/us/business/download/resources/CT00021979/LRDCS2603_LG_Pro_Builder_Spec_Sheet_101425%5B20251031_215341%5D.pdf", "value_in": 2.0}]}, "result_in": 31.5}

Why this value was used

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "data/truth-set/lg-lrdcs2603s.json", "page": 2, "raw": "Depth without Door 29 1/2 in", "source_url": "https://www.lg.com/us/business/download/resources/CT00021979/LRDCS2603_LG_Pro_Builder_Spec_Sheet_101425%5B20251031_215341%5D.pdf", "value_in": 29.5}], "rear_clearance_in": [{"cache_path": "data/truth-set/lg-lrdcs2603s.json", "page": 2, "raw": "Installation Clearance Back 2 in", "source_url": "https://www.lg.com/us/business/download/resources/CT00021979/LRDCS2603_LG_Pro_Builder_Spec_Sheet_101425%5B20251031_215341%5D.pdf", "value_in": 2.0}]}, "result_in": 31.5} Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Installation Clearance Sides 2 in

Why this value was used

Installation Clearance Sides 2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Installation Clearance Sides 2 in

Why this value was used

Installation Clearance Sides 2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Installation Clearance Top 2 in

Why this value was used

Installation Clearance Top 2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Installation Clearance Back 2 in

Why this value was used

Installation Clearance Back 2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

4.25 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). Door Edge Clearance with Handle 4 1/4 in

Why this value was used

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). Door Edge Clearance with Handle 4 1/4 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.75 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lg-lrdcs2603s.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Width 32 3/4 in

Why this value was used

Width 32 3/4 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.