This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)
Last reviewed: 2026-09-05. 8 retained source records. 0 unresolved conflicts. Not every fit-critical input is supported.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
ExactFit does not have sufficient evidence for every fit-critical measurement. The fit checker will return Uncertain unless a known measurement already proves that the model does not fit.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | Unknown | ? Not found · Calculated/inferred | LF29S8230V images.thdstatic.com | Page 1 | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: same-platform family propagation (LF29S) from LF29S8230V Confidence label: medium. Primary evidenceLF29S8230V Unanimous same-platform value 35.75 in from LF29S8230V; at least three populated dimensions match and none conflict. Donor evidence: Exact-model LG Home Solutions specification sheet, page 1: Width = 35 3/4 inOpen original source ↗ Why this value was usedThe stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 35.75 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | 69 in | ✓ Verified — exact model | 29 cu. ft. French Door Refrigerator - LF29S9775S | LG USA LG | Retained specification excerpt: Height to Top of Case: 69.0 in | h handles) 35 3/4" x 70 3/8" x 34 3/8" Door Edge Clearance without | |
Value used by ExactFit69 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence29 cu. ft. French Door Refrigerator - LF29S9775S | LG USA Height to Top of Case: 69.0 in | h handles) 35 3/4" x 70 3/8" x 34 3/8" Door Edge Clearance without Handle 2.25" Height to Top of Case 69" Height to Top of Door Hinge 70.375" Installation Clearance Sides 1/8", Top 1",Open original source ↗ Why this value was usedHeight to Top of Case: 69.0 in | h handles) 35 3/4" x 70 3/8" x 34 3/8" Door Edge Clearance without Handle 2.25" Height to Top of Case 69" Height to Top of Door Hinge 70.375" Installation Clearance Sides 1/8", Top 1", Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 70.38 in | ✓ Verified — exact model | 29 cu. ft. French Door Refrigerator - LF29S9775S | LG USA LG | Retained specification excerpt: Height to Top of Door Hinge: 70.38 in | 8" x 34 3/8" Door Edge Clearance without Handle 2.25" Height | |
Value used by ExactFit70.38 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence29 cu. ft. French Door Refrigerator - LF29S9775S | LG USA Height to Top of Door Hinge: 70.38 in | 8" x 34 3/8" Door Edge Clearance without Handle 2.25" Height to Top of Case 69" Height to Top of Door Hinge 70.375" Installation Clearance Sides 1/8", Top 1", Back 2" Standard Depth Yes Weight (UOpen original source ↗ Why this value was usedHeight to Top of Door Hinge: 70.38 in | 8" x 34 3/8" Door Edge Clearance without Handle 2.25" Height to Top of Case 69" Height to Top of Door Hinge 70.375" Installation Clearance Sides 1/8", Top 1", Back 2" Standard Depth Yes Weight (U Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | 30 in | ✓ Verified — exact model | LG measurement source — https://www.lg.com/us/support/products/documents/LF29S9775S_2025_Spec_Sheet_Refrigeration_100725.pdf LG | Page 1 | |
Value used by ExactFit30 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG measurement source — https://www.lg.com/us/support/products/documents/LF29S9775S_2025_Spec_Sheet_Refrigeration_100725.pdf Depth without Door = 30" | Depth without Door | 30" | Depth without HandlesOpen original source ↗ Why this value was usedDepth without Door = 30" | Depth without Door | 30" | Depth without Handles Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 34.38 in | ✓ Verified — exact model | 29 cu. ft. French Door Refrigerator - LF29S9775S | LG USA LG | Retained specification excerpt: Depth without Handles: 34.38 in | (to Hinge Cover) 30" Depth (Total with Door Open) 48.5" Depth wit | |
Value used by ExactFit34.38 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence29 cu. ft. French Door Refrigerator - LF29S9775S | LG USA Depth without Handles: 34.38 in | (to Hinge Cover) 30" Depth (Total with Door Open) 48.5" Depth without Door 30" Depth without Handles 34.375" Dimensions (W case x H top of hinge x D with handles) 35 3/4" x 70 3/8" x 34 3/Open original source ↗ Why this value was usedDepth without Handles: 34.38 in | (to Hinge Cover) 30" Depth (Total with Door Open) 48.5" Depth without Door 30" Depth without Handles 34.375" Dimensions (W case x H top of hinge x D with handles) 35 3/4" x 70 3/8" x 34 3/ Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 34.375 in | ✓ Verified — equivalent model · Calculated/inferred | LG LF29S8365S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit34.375 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: same-platform family propagation (LF29S) from LF29S8230V Confidence label: medium. Primary evidenceLG LF29S8365S Spec Sheet Unanimous same-platform value 34.375 in from LF29S8230V; at least three populated dimensions match and none conflict. Donor evidence: Medium-confidence chassis inference from LF29S8365S. Donors unanimously report depth_with_handles_in=34.375 in; at least four direct chassis dimensions match and none conflict. Matching fields: width_doors_closed_in, height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in. Donor evidence: WxHxD) 35 3/4" x 70 1/4" x 34 3/8"Open original source ↗ Why this value was usedUnanimous same-platform value 34.375 in from LF29S8230V; at least three populated dimensions match and none conflict. Donor evidence: Medium-confidence chassis inference from LF29S8365S. Donors unanimously report depth_with_handles_in=34.375 in; at least four direct chassis dimensions match and none conflict. Matching fields: width_doors_closed_in, height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in. Donor evidence: WxHxD) 35 3/4" x 70 1/4" x 34 3/8" Calculation or inference: same-platform family propagation (LF29S) from LF29S8230V. Why evidence from LF29S8365S appliesTarget model: LF29S9775S. Supporting model: LF29S8365S. Manufacturer: LG. Product family and measurement relationship: same-platform family propagation (LF29S) from LF29S8230V. Measurement transferred: Depth with handle. Relevant equivalence evidence: Unanimous same-platform value 34.375 in from LF29S8230V; at least three populated dimensions match and none conflict. Donor evidence: Medium-confidence chassis inference from LF29S8365S. Donors unanimously report depth_with_handles_in=34.375 in; at least four direct chassis dimensions match and none conflict. Matching fields: width_doors_closed_in, height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in. Donor evidence: WxHxD) 35 3/4" x 70 1/4" x 34 3/8". Known differences: not separately recorded. Review decision: sibling chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 48.875 in | ✓ Verified — exact model | LG measurement source — https://www.lg.com/us/support/products/documents/LF29S9775S_2025_Spec_Sheet_Refrigeration_100725.pdf LG | Page 2 | |
Value used by ExactFit48.875 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG measurement source — https://www.lg.com/us/support/products/documents/LF29S9775S_2025_Spec_Sheet_Refrigeration_100725.pdf Depth (Total with Door Open 90°): 48.875 in | Depth (Total with Door Open 90°) | 48 7/8" (1240 mm) | Length of Power CordOpen original source ↗ Why this value was usedDepth (Total with Door Open 90°): 48.875 in | Depth (Total with Door Open 90°) | 48 7/8" (1240 mm) | Length of Power Cord Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | Unknown | ? Not found · Calculated/inferred | LG measurement source — https://images.thdstatic.com/catalog/pdfImages/0c/0cbe2c55-6ba5-4057-8304-550f20176f9c.pdf + https://images.thdstatic.com/catalog/pdfImages/0c/0cbe2c55-6ba5-4057-8304-550f20176f9c.pdf images.thdstatic.com | Retained specification excerpt: Unanimous same-platform value 36.0 in from LF29S8230V; at least three populated dimensions match and | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: same-platform family propagation (LF29S) from LF29S8230V Confidence label: medium. Primary evidenceLG measurement source — https://images.thdstatic.com/catalog/pdfImages/0c/0cbe2c55-6ba5-4057-8304-550f20176f9c.pdf + https://images.thdstatic.com/catalog/pdfImages/0c/0cbe2c55-6ba5-4057-8304-550f20176f9c.pdf Unanimous same-platform value 36.0 in from LF29S8230V; at least three populated dimensions match and none conflict. Donor evidence: Derived minimum opening width 36.0 in from product width 35.75 in and explicit 0.125 in clearance on each side.Open original source ↗ Why this value was usedThe stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 36 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | 71.38 in | ✓ Verified — exact model · Calculated/inferred | 29 cu. ft. French Door Refrigerator - LF29S9775S | LG USA LG | Retained specification excerpt: Minimum opening height derived from highest stored appliance endpoint 70.38 in plus documented top c | |
Value used by ExactFit71.38 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence29 cu. ft. French Door Refrigerator - LF29S9775S | LG USA Minimum opening height derived from highest stored appliance endpoint 70.38 in plus documented top clearance 1.0 in.Open original source ↗ Why this value was usedMinimum opening height derived from highest stored appliance endpoint 70.38 in plus documented top clearance 1.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | 32 in | ✓ Verified — exact model · Calculated/inferred | LG measurement source — 9d25b807975fea34d8c20747523b419bf109d09054ad7e634091889eec49014d.pdf LG | Page 2 | |
Value used by ExactFit32 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidenceLG measurement source — 9d25b807975fea34d8c20747523b419bf109d09054ad7e634091889eec49014d.pdf Minimum opening depth derived from case-only depth 30.0 in plus documented rear clearance 2.0 in.Open original source ↗ Why this value was usedMinimum opening depth derived from case-only depth 30.0 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | Unknown | ? Not found · Calculated/inferred | LF29S8230V images.thdstatic.com | Retained specification excerpt: Conflict-free 5-character model-series consensus (LF29S) from 2 directly evidenced models; example L | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: model-series prefix LF29S; 2 direct seeds; unanimous value 0.125 Confidence label: medium. Primary evidenceLF29S8230V Conflict-free 5-character model-series consensus (LF29S) from 2 directly evidenced models; example LG LF29S8230V: Installation Clearance Sides = 0.125 in | (Total with Door Open) 48 1/2" Depth (Draw Open Fully with out Handle) 55 3/8" Installation Clearance Sides 1/8", Top 1", Back 2" Carton Dimensions (WxHxD) 37 7/8" x 72 3/8" x 36 3/8" Weight ( | cached support: images.thdstatic.com, images.webfronts.comOpen original source ↗ Why this value was usedA low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 0.125 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | Unknown | ? Not found · Calculated/inferred | LF29S8230V images.thdstatic.com | Retained specification excerpt: Conflict-free 5-character model-series consensus (LF29S) from 2 directly evidenced models; example L | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: model-series prefix LF29S; 2 direct seeds; unanimous value 0.125 Confidence label: medium. Primary evidenceLF29S8230V Conflict-free 5-character model-series consensus (LF29S) from 2 directly evidenced models; example LG LF29S8230V: Installation Clearance Sides = 0.125 in | (Total with Door Open) 48 1/2" Depth (Draw Open Fully with out Handle) 55 3/8" Installation Clearance Sides 1/8", Top 1", Back 2" Carton Dimensions (WxHxD) 37 7/8" x 72 3/8" x 36 3/8" Weight ( | cached support: images.thdstatic.com, images.webfronts.comOpen original source ↗ Why this value was usedA low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 0.125 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | 1 in | ✓ Verified — exact model | 29 cu. ft. French Door Refrigerator - LF29S9775S | LG USA LG | Retained specification excerpt: Installation Clearance Sides: 0.12 in | hout Handle 2.25" Height to Top of Case 69" Height to Top of | |
Value used by ExactFit1 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence29 cu. ft. French Door Refrigerator - LF29S9775S | LG USA Installation Clearance Sides: 0.12 in | hout Handle 2.25" Height to Top of Case 69" Height to Top of Door Hinge 70.375" Installation Clearance Sides 1/8", Top 1", Back 2" Standard Depth Yes Weight (Unit/Carton) 351 lbs / 373 lbs WidtOpen original source ↗ Why this value was usedInstallation Clearance Sides: 0.12 in | hout Handle 2.25" Height to Top of Case 69" Height to Top of Door Hinge 70.375" Installation Clearance Sides 1/8", Top 1", Back 2" Standard Depth Yes Weight (Unit/Carton) 351 lbs / 373 lbs Widt Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | 2 in | ✓ Verified — exact model | LG measurement source — 9d25b807975fea34d8c20747523b419bf109d09054ad7e634091889eec49014d.pdf LG | Page 2 | |
Value used by ExactFit2 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG measurement source — 9d25b807975fea34d8c20747523b419bf109d09054ad7e634091889eec49014d.pdf Back Clearance 2"Open original source ↗ Why this value was usedBack Clearance 2" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Hinge-side wall clearance | 4.25 in | ✓ Verified — equivalent model · Calculated/inferred | LG LF29H8330S Specifications assets.skulytics.io | Page 1 | |
Value used by ExactFit4.25 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: LG chassis/family donor LF29H8330S: LF29 36-inch French-door platform; six matching dimensions Confidence label: medium. Primary evidenceLG LF29H8330S Specifications Documented LG family/chassis propagation from LF29H8330S: LF29 36-inch French-door platform; six matching dimensions; donor door-edge clearance = 4.25 in.Open original source ↗ Why this value was usedDocumented LG family/chassis propagation from LF29H8330S: LF29 36-inch French-door platform; six matching dimensions; donor door-edge clearance = 4.25 in. Calculation or inference: LG chassis/family donor LF29H8330S: LF29 36-inch French-door platform; six matching dimensions. Why evidence from LF29H8330S appliesTarget model: LF29S9775S. Supporting model: LF29H8330S. Manufacturer: LG. Product family and measurement relationship: LG chassis/family donor LF29H8330S: LF29 36-inch French-door platform; six matching dimensions. Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: Documented LG family/chassis propagation from LF29H8330S: LF29 36-inch French-door platform; six matching dimensions; donor door-edge clearance = 4.25 in.. Known differences: not separately recorded. Review decision: documented chassis family propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | Unknown | ? Not found · Calculated/inferred | LG measurement source — LG LF29S9775S exact-model cached specification Publisher not recorded | Retained specification excerpt: Exact-model width is 35.75 in; matching LG specification and all related chassis dimensions. | |
Value used by ExactFitUnknown · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: case width equals documented product width for this chassis Confidence label: medium. Primary evidenceLG measurement source — LG LF29S9775S exact-model cached specification Exact-model width is 35.75 in; matching LG specification and all related chassis dimensions. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedThe stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 35.75 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Adjoining-wall clearance (reviewed endpoint) | 0.12 in | ✓ Verified — exact model | 29 cu. ft. French Door Refrigerator - LF29S9775S | LG USA LG | Retained specification excerpt: Installation Clearance Sides: 0.12 in | hout Handle 2.25" Height to Top of Case 69" Height to Top of | |
Value used by ExactFit0.12 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence29 cu. ft. French Door Refrigerator - LF29S9775S | LG USA Installation Clearance Sides: 0.12 in | hout Handle 2.25" Height to Top of Case 69" Height to Top of Door Hinge 70.375" Installation Clearance Sides 1/8", Top 1", Back 2" Standard Depth Yes Weight (Unit/Carton) 351 lbs / 373 lbs WidtOpen original source ↗ Why this value was usedInstallation Clearance Sides: 0.12 in | hout Handle 2.25" Height to Top of Case 69" Height to Top of Door Hinge 70.375" Installation Clearance Sides 1/8", Top 1", Back 2" Standard Depth Yes Weight (Unit/Carton) 351 lbs / 373 lbs Widt Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Not found for safe fit use. Sources retained: https://images.thdstatic.com/catalog/pdfImages/0c/0cbe2c55-6ba5-4057-8304-550f20176f9c.pdf. Related-model record: LF29S9775S.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: https://images.thdstatic.com/catalog/pdfImages/0c/0cbe2c55-6ba5-4057-8304-550f20176f9c.pdf + https://images.thdstatic.com/catalog/pdfImages/0c/0cbe2c55-6ba5-4057-8304-550f20176f9c.pdf. Related-model record: LF29S9775S.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: https://images.thdstatic.com/catalog/pdfImages/0c/0cbe2c55-6ba5-4057-8304-550f20176f9c.pdf. Related-model record: LF29S9775S.
A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: https://images.thdstatic.com/catalog/pdfImages/0c/0cbe2c55-6ba5-4057-8304-550f20176f9c.pdf. Related-model record: LF29S9775S.
A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: LG LF29S9775S exact-model cached specification. No rejected related-model candidate is identified in the retained record.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
images.thdstatic.com · Web source · Scope not established
Model numbers covered: LF29S9775S. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
3 displayed measurements supported: Overall width; Left-side ventilation clearance; Right-side ventilation clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗LG · Web source · exact model/source
Model numbers covered: LF29S9775S. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
6 displayed measurements supported: Cabinet height; Height with hinge / controlling height; Depth with door, without handles; Minimum cutout height; Top clearance; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗LG · Web source · exact model/source
Model numbers covered: LF29S9775S. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
2 displayed measurements supported: Depth without door; Depth with doors open at 90°.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Spec Sheet · equivalent model/source
Model numbers covered: LF29S8365S. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
1 displayed measurements supported: Depth with handle.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗images.thdstatic.com · Web source · Scope not established
Model numbers covered: LF29S9775S. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
1 displayed measurements supported: Minimum cutout width.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗LG · Web source · exact model/source
Model numbers covered: LF29S9775S. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
2 displayed measurements supported: Minimum cutout depth; Rear clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Specifications · equivalent model/source
Model numbers covered: LF29H8330S. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
1 displayed measurements supported: Hinge-side wall clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Publisher not recorded · Retained document · Scope not established
Model numbers covered: Not explicitly retained. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
1 displayed measurements supported: Cabinet case width.
Availability: retained review record; original URL unavailable in the record.
Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.