This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Unknown configuration · Counter-depth
Market status: Active (recorded 2026-08-17)
Last reviewed: 2026-09-05. 1 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | 35.75 in | ✓ Secondary source only | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit35.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG LF25Z6211S Spec Sheet Width 35 3/4"Open original source ↗ Why this value was usedWidth 35 3/4" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | 68.875 in | ✓ Secondary source only | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit68.875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG LF25Z6211S Spec Sheet Height to Top of Case 68 7/8"Open original source ↗ Why this value was usedHeight to Top of Case 68 7/8" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 70.25 in | ✓ Secondary source only | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit70.25 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG LF25Z6211S Spec Sheet WxHxD) 35 3/4" x 70 1/4" x 27 1/2Open original source ↗ Why this value was usedWxHxD) 35 3/4" x 70 1/4" x 27 1/2 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | 24.75 in | ✓ Secondary source only | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit24.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG LF25Z6211S Spec Sheet Depth without Door 24 3/4Open original source ↗ Why this value was usedDepth without Door 24 3/4 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 27.5 in | ✓ Secondary source only | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit27.5 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG LF25Z6211S Spec Sheet Depth without Handles 27 1/2"Open original source ↗ Why this value was usedDepth without Handles 27 1/2" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 27.5 in | ✓ Secondary source only | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit27.5 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG LF25Z6211S Spec Sheet WxHxD) 35 3/4" x 70 1/4" x 27 1/2Open original source ↗ Why this value was usedWxHxD) 35 3/4" x 70 1/4" x 27 1/2 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 43.75 in | ✓ Secondary source only | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit43.75 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG LF25Z6211S Spec Sheet Depth (Total with Door Open) 43 3/4"Open original source ↗ Why this value was usedDepth (Total with Door Open) 43 3/4" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | 36.0625 in | ✓ Secondary source only · Calculated/inferred | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit36.0625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * exact-model installation side clearance Confidence label: medium. Calculation inputs: Overall width; Primary evidenceLG LF25Z6211S Spec Sheet Derived minimum opening width: 35.75 + 2 x 0.15625 = 36.0625 in. Exact-model clearance evidence: Installation Clearance | Sides 5/32"Open original source ↗ Why this value was usedDerived minimum opening width: 35.75 + 2 x 0.15625 = 36.0625 in. Exact-model clearance evidence: Installation Clearance | Sides 5/32" Calculation or inference: width_doors_closed_in + 2 * exact-model installation side clearance. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | 71.25 in | ✓ Secondary source only · Calculated/inferred | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit71.25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidenceLG LF25Z6211S Spec Sheet Minimum opening height derived from highest stored appliance endpoint 70.25 in plus documented top clearance 1.0 in.Open original source ↗ Why this value was usedMinimum opening height derived from highest stored appliance endpoint 70.25 in plus documented top clearance 1.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | 26.75 in | ✓ Secondary source only · Calculated/inferred | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit26.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidenceLG LF25Z6211S Spec Sheet LG opening envelope: 24.75 + 2.0 = 26.75 in.Open original source ↗ Why this value was usedLG opening envelope: 24.75 + 2.0 = 26.75 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | 0.156 in | ✓ Secondary source only | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit0.156 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG LF25Z6211S Spec Sheet Corrected prior semantic mismatch 2.125 in (Door Edge Clearance with Handle 2 1/8"). Exact-model installation-side evidence: Installation Clearance | Sides 5/32"Open original source ↗ Why this value was usedCorrected prior semantic mismatch 2.125 in (Door Edge Clearance with Handle 2 1/8"). Exact-model installation-side evidence: Installation Clearance | Sides 5/32" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | 0.156 in | ✓ Secondary source only | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit0.156 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG LF25Z6211S Spec Sheet Corrected prior semantic mismatch 2.125 in (Door Edge Clearance with Handle 2 1/8"). Exact-model installation-side evidence: Installation Clearance | Sides 5/32"Open original source ↗ Why this value was usedCorrected prior semantic mismatch 2.125 in (Door Edge Clearance with Handle 2 1/8"). Exact-model installation-side evidence: Installation Clearance | Sides 5/32" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | 1 in | ✓ Secondary source only | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit1 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceLG LF25Z6211S Spec Sheet Installation Clearance | Sides 5/32", Top 1", Back 2" | Carton Dimensions (WxHxD)Open original source ↗ Why this value was usedInstallation Clearance | Sides 5/32", Top 1", Back 2" | Carton Dimensions (WxHxD) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | 2 in | ✓ Secondary source only | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit2 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG LF25Z6211S Spec Sheet Installation Clearance Sides 5/32", Top 1", Back 2"Open original source ↗ Why this value was usedInstallation Clearance Sides 5/32", Top 1", Back 2" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Hinge-side wall clearance | 2.125 in | ✓ Secondary source only | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit2.125 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG LF25Z6211S Spec Sheet Door Edge Clearance with Handle 2 1/8"Open original source ↗ Why this value was usedDoor Edge Clearance with Handle 2 1/8" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | 35.75 in | ✓ Secondary source only | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit35.75 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG LF25Z6211S Spec Sheet Width 35 3/4"Open original source ↗ Why this value was usedWidth 35 3/4" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Adjoining-wall clearance (reviewed endpoint) | 0.15625 in | ✓ Conflicting sources — resolved | LG LF25Z6211S Spec Sheet assets.skulytics.io | Page 1 | |
Value used by ExactFit0.15625 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceLG LF25Z6211S Spec Sheet Corrected prior semantic mismatch 2.125 in (Door Edge Clearance with Handle 2 1/8"). Exact-model installation-side evidence: Installation Clearance | Sides 5/32"Open original source ↗ Why this value was usedCorrected prior semantic mismatch 2.125 in (Door Edge Clearance with Handle 2 1/8"). Exact-model installation-side evidence: Installation Clearance | Sides 5/32" Other evidence found
Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Selected: 0.15625 in. Earlier retained values: 2.125 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Corrected prior semantic mismatch 2.125 in (Door Edge Clearance with Handle 2 1/8"). Exact-model installation-side evidence: Installation Clearance | Sides 5/32"
View source scope, location, and impact on fitassets.skulytics.io · Spec Sheet · secondary model/source
Model numbers covered: LF25Z6211S. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
17 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Minimum cutout width; Minimum cutout height; Minimum cutout depth; Left-side ventilation clearance; Right-side ventilation clearance; Top clearance; Rear clearance; Hinge-side wall clearance; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.