Measurement evidence for LG LF24Z6330S

Value used by ExactFit

35.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from LF24Z6530S

Confidence label: medium.

Primary evidence

LG measurement source — 104687242.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Medium-confidence chassis inference from LF24Z6530S. Donors unanimously report width_doors_closed_in=35.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Width 35 3/4"

Why this value was used

Medium-confidence chassis inference from LF24Z6530S. Donors unanimously report width_doors_closed_in=35.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Width 35 3/4" Calculation or inference: same-brand product-class chassis propagation from LF24Z6530S.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.88 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lf24z6330s
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height to Top of Case: 68.88 in | handle (inch) 27 1/2" Depth with handle (inch) 29 7/8" Gross Weigh
Reviewed: 2026-09-04

Height to Top of Case: 68.88 in | handle (inch) 27 1/2" Depth with handle (inch) 29 7/8" Gross Weight (lb.) 280.9 Height to Top of Case (inch) 68 7/8" Height to Top of Hinge or Door Cap Deco (inch) 70 1/4" Installation Clearance B

Why this value was used

Height to Top of Case: 68.88 in | handle (inch) 27 1/2" Depth with handle (inch) 29 7/8" Gross Weight (lb.) 280.9 Height to Top of Case (inch) 68 7/8" Height to Top of Hinge or Door Cap Deco (inch) 70 1/4" Installation Clearance B

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lf24z6330s
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height to Top of Hinge: 70.25 in | le (inch) 29 7/8" Gross Weight (lb.) 280.9 Height to Top of Case
Reviewed: 2026-09-04

Height to Top of Hinge: 70.25 in | le (inch) 29 7/8" Gross Weight (lb.) 280.9 Height to Top of Case (inch) 68 7/8" Height to Top of Hinge or Door Cap Deco (inch) 70 1/4" Installation Clearance Back 2" Packing Dimension (WxHxD, inch) 38" x 73" x 30"

Why this value was used

Height to Top of Hinge: 70.25 in | le (inch) 29 7/8" Gross Weight (lb.) 280.9 Height to Top of Case (inch) 68 7/8" Height to Top of Hinge or Door Cap Deco (inch) 70 1/4" Installation Clearance Back 2" Packing Dimension (WxHxD, inch) 38" x 73" x 30"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lf24z6330s
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without door: 24.75 in | alarm Yes Express Freeze Yes #### DIMENSIONS & WEIGHT Product Weight
Reviewed: 2026-09-04

Depth without door: 24.75 in | alarm Yes Express Freeze Yes #### DIMENSIONS & WEIGHT Product Weight (lb.) 261 Depth without door (inch) 24 3/4" Depth without handle (inch) 27 1/2" Depth with handle (inch) 29 7/8" Gross Weig

Why this value was used

Depth without door: 24.75 in | alarm Yes Express Freeze Yes #### DIMENSIONS & WEIGHT Product Weight (lb.) 261 Depth without door (inch) 24 3/4" Depth without handle (inch) 27 1/2" Depth with handle (inch) 29 7/8" Gross Weig

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

27.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lf24z6330s
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without handle: 27.5 in | DIMENSIONS & WEIGHT Product Weight (lb.) 261 Depth without door (in
Reviewed: 2026-09-04

Depth without handle: 27.5 in | DIMENSIONS & WEIGHT Product Weight (lb.) 261 Depth without door (inch) 24 3/4" Depth without handle (inch) 27 1/2" Depth with handle (inch) 29 7/8" Gross Weight (lb.) 280.9 Height to Top of Case

Why this value was used

Depth without handle: 27.5 in | DIMENSIONS & WEIGHT Product Weight (lb.) 261 Depth without door (inch) 24 3/4" Depth without handle (inch) 27 1/2" Depth with handle (inch) 29 7/8" Gross Weight (lb.) 280.9 Height to Top of Case

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29.88 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lf24z6330s
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with handle: 29.88 in | (lb.) 261 Depth without door (inch) 24 3/4" Depth without handle (inch
Reviewed: 2026-09-04

Depth with handle: 29.88 in | (lb.) 261 Depth without door (inch) 24 3/4" Depth without handle (inch) 27 1/2" Depth with handle (inch) 29 7/8" Gross Weight (lb.) 280.9 Height to Top of Case (inch) 68 7/8" Height to Top of

Why this value was used

Depth with handle: 29.88 in | (lb.) 261 Depth without door (inch) 24 3/4" Depth without handle (inch) 27 1/2" Depth with handle (inch) 29 7/8" Gross Weight (lb.) 280.9 Height to Top of Case (inch) 68 7/8" Height to Top of

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

43.88 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lf24z6330s
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with Door 90: 43.88 in | " x 73" x 30" Product Dimension (WxHxD, inch) 35 3/4" x 70 1/4" x 29
Reviewed: 2026-09-04

Depth with Door 90: 43.88 in | " x 73" x 30" Product Dimension (WxHxD, inch) 35 3/4" x 70 1/4" x 29 7/8" Total Depth with Door 90 Open (inch) 43 7/8" Width door open 90 without Handle (inch) 35 1/8" Width door open 90 with Handle

Why this value was used

Depth with Door 90: 43.88 in | " x 73" x 30" Product Dimension (WxHxD, inch) 35 3/4" x 70 1/4" x 29 7/8" Total Depth with Door 90 Open (inch) 43 7/8" Width door open 90 without Handle (inch) 35 1/8" Width door open 90 with Handle

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.75 + 2 * 0.125

Confidence label: medium.

Primary evidence

LG measurement source — 104687242.pdf + side gap from the maker's document
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.0 in from product width 35.75 in and explicit 0.125 in clearance on
Reviewed: 2026-09-04

Derived minimum opening width 36.0 in from product width 35.75 in and explicit 0.125 in clearance on each side.

Why this value was used

Derived minimum opening width 36.0 in from product width 35.75 in and explicit 0.125 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 35.75 + 2 * 0.125.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

71.25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

LG measurement source — 104687242.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

LG opening envelope: max(68.88, 70.25) + 1.0 = 71.25 in.

Why this value was used

LG opening envelope: max(68.88, 70.25) + 1.0 = 71.25 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

LG measurement source — 104687242.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

LG opening envelope: 24.75 + 2.0 = 26.75 in.

Why this value was used

LG opening envelope: 24.75 + 2.0 = 26.75 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

LG measurement source — 104687242.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-29

LG LF24Z6530S installation manual (same LF24Z chassis): "Installation Clearance Sides 1/8", Top 1", Back 2"".

Why this value was used

LG LF24Z6530S installation manual (same LF24Z chassis): "Installation Clearance Sides 1/8", Top 1", Back 2"".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

LG measurement source — 104687242.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-29

LG LF24Z6530S installation manual (same LF24Z chassis): "Installation Clearance Sides 1/8", Top 1", Back 2"".

Why this value was used

LG LF24Z6530S installation manual (same LF24Z chassis): "Installation Clearance Sides 1/8", Top 1", Back 2"".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: LF24Z6330S/LF24Z6530S exact eight-dimension chassis

Confidence label: medium.

Primary evidence

LG measurement source — 104687242.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

LF24Z exact eight-dimension chassis match to LF24Z6530S; documented top_clearance_in = 1 in.

Why this value was used

LF24Z exact eight-dimension chassis match to LF24Z6530S; documented top_clearance_in = 1 in. Calculation or inference: LF24Z6330S/LF24Z6530S exact eight-dimension chassis.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: LF24Z6330S/LF24Z6530S exact eight-dimension chassis

Confidence label: medium.

Primary evidence

LG measurement source — 104687242.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

LF24Z exact eight-dimension chassis match to LF24Z6530S; documented rear_clearance_in = 2 in.

Why this value was used

LF24Z exact eight-dimension chassis match to LF24Z6530S; documented rear_clearance_in = 2 in. Calculation or inference: LF24Z6330S/LF24Z6530S exact eight-dimension chassis.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: (40 - 35.75) / 2

Confidence label: high.

Primary evidence

LG measurement source — LF24Z6330S_2025_Refrigeration_Spec_Sheet_100725.pdf
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-25

LG product page/spec sheet: “Width (Door Open 90˚ with Handle) 40"” and “Width 35 3/4".” French doors: the extra width is split between the sides. Found by the Hermes LG manuals run 2026-10-25.

Why this value was used

LG product page/spec sheet: “Width (Door Open 90˚ with Handle) 40"” and “Width 35 3/4".” French doors: the extra width is split between the sides. Found by the Hermes LG manuals run 2026-10-25.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.75 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from LF24Z6530S

Confidence label: medium.

Primary evidence

LG measurement source — 104687242.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Medium-confidence chassis inference from LF24Z6530S. Donors unanimously report case_width_in=35.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Width 35 3/4"

Why this value was used

Medium-confidence chassis inference from LF24Z6530S. Donors unanimously report case_width_in=35.75 in; at least four direct chassis dimensions match and none conflict. Matching fields: height_case_in, height_hinge_in, depth_case_only_in, depth_less_handles_in, depth_with_handles_in. Donor evidence: Width 35 3/4" Calculation or inference: same-brand product-class chassis propagation from LF24Z6530S.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.