Measurement evidence for LG LB26H2200S

Value used by ExactFit

32.9375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

LG measurement source — LG_LB26H2200S_Bottom_Freezer_Refrigerators_LG_LB26H2200S.html
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Width = 32.9375 in | Counter-Depth | No | | Built-In | No | | D
Reviewed: 2026-09-04

Plain exact-model specification row: Width = 32.9375 in | Counter-Depth | No | | Built-In | No | | Defrost Type | Automatic | | Total Capacity | 25.5 Cu Ft | | Width | 32 15/16 inches | | Height (to Top of Hinge / Door Cap) | 69 15/16 inches | | Height (to Top of Case) | 68 5/8 inches | | Depth (Withou

Why this value was used

Plain exact-model specification row: Width = 32.9375 in | Counter-Depth | No | | Built-In | No | | Defrost Type | Automatic | | Total Capacity | 25.5 Cu Ft | | Width | 32 15/16 inches | | Height (to Top of Hinge / Door Cap) | 69 15/16 inches | | Height (to Top of Case) | 68 5/8 inches | | Depth (Withou

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lb26h2200s
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model page: Height to Top of Case 68 5/8 in.
Reviewed: 2026-09-04

Official exact-model page: Height to Top of Case 68 5/8 in.

Why this value was used

Official exact-model page: Height to Top of Case 68 5/8 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.9375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lb26h2200s
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model page: Height to Top of Hinge or Door Cap Deco 69 15/16 in.
Reviewed: 2026-09-04

Official exact-model page: Height to Top of Hinge or Door Cap Deco 69 15/16 in.

Why this value was used

Official exact-model page: Height to Top of Hinge or Door Cap Deco 69 15/16 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lb26h2200s
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model page: Depth without door 29 1/2 in.
Reviewed: 2026-09-04

Official exact-model page: Depth without door 29 1/2 in.

Why this value was used

Official exact-model page: Depth without door 29 1/2 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

35.9375 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — web-e68dd38d97.pdf
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-15

LB26H2200 spec sheet 10/8/2025: "A Depth without Handle 35 15/16" (913 mm)"; "G Depth with Handle 35 15/16"". Replaces an LG Canada web-page figure.

Why this value was used

LB26H2200 spec sheet 10/8/2025: "A Depth without Handle 35 15/16" (913 mm)"; "G Depth with Handle 35 15/16"". Replaces an LG Canada web-page figure.

Other evidence found

• 33.4375 in — superseded

  www.canadianappliance.ca; location not retained. Model scope: not separately recorded. Raw value: Depth (Without Handle) = 33.4375 in | t (to Top of Case) | 68 5/8 inches | | Depth (Without Door) | 29 1/2 inches | | Depth (Without Handle) | 33 7/16 inches | | Depth (With Handle) | 35 15/16 inches | | Depth (Total with Door Open 90°) . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.9375 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — lb26h2200s
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with handle = 35.9375 in | .9 - Depth without door (inch) 29 1/2" - Depth without handle (inch
Reviewed: 2026-09-04

Depth with handle = 35.9375 in | .9 - Depth without door (inch) 29 1/2" - Depth without handle (inch) 33 7/16" - Depth with handle (inch) 35 15/16" - Gross Weight (lb.) 250 - Height to Top of Case (inch) 68 5/8" - Height to Top

Why this value was used

Depth with handle = 35.9375 in | .9 - Depth without door (inch) 29 1/2" - Depth without handle (inch) 33 7/16" - Depth with handle (inch) 35 15/16" - Gross Weight (lb.) 250 - Height to Top of Case (inch) 68 5/8" - Height to Top

Other evidence found

• 90 in — superseded

  www.canadianappliance.ca; location not retained. Model scope: not separately recorded. Raw value: depth (with handle) : Depth (Total with Door Open 90°) . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

63.25 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

LG measurement source — LG_LB26H2200S_Bottom_Freezer_Refrigerators_LG_LB26H2200S.html
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth (Total with Door Open 90° = 63.25 in | (Without Handle) | 33 7/16 inches | | Depth (With Handl
Reviewed: 2026-09-04

Depth (Total with Door Open 90° = 63.25 in | (Without Handle) | 33 7/16 inches | | Depth (With Handle) | 35 15/16 inches | | Depth (Total with Door Open 90°) | 63 1/4 inches | | Depth (Total with Freezer Drawer Open) | 54 3/8 inches | | Installation Cle

Why this value was used

Depth (Total with Door Open 90° = 63.25 in | (Without Handle) | 33 7/16 inches | | Depth (With Handle) | 35 15/16 inches | | Depth (Total with Door Open 90°) | 63 1/4 inches | | Depth (Total with Freezer Drawer Open) | 54 3/8 inches | | Installation Cle

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.5375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 32.9375 + 2 * 0.3

Confidence label: medium.

Primary evidence

LG measurement source — LG_LB26H2200S_Bottom_Freezer_Refrigerators_LG_LB26H2200S.html + lb26h2200s
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 33.5375 in from product width 32.9375 in and explicit 0.3 in clearance
Reviewed: 2026-09-04

Derived minimum opening width 33.5375 in from product width 32.9375 in and explicit 0.3 in clearance on each side.

Why this value was used

Derived minimum opening width 33.5375 in from product width 32.9375 in and explicit 0.3 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 32.9375 + 2 * 0.3.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.9375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

LG measurement source — 52c95cb8c1574734aba0dfcfeaeefebc58d032ef47a05296b040fb06258c9510.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: LG opening envelope: max(68.625, 69.9375) + 1.0 = 70.9375 in.
Reviewed: 2026-09-05

LG opening envelope: max(68.625, 69.9375) + 1.0 = 70.9375 in.

Why this value was used

LG opening envelope: max(68.625, 69.9375) + 1.0 = 70.9375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

LG measurement source — 52c95cb8c1574734aba0dfcfeaeefebc58d032ef47a05296b040fb06258c9510.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: LG opening envelope: 29.5 + 2.0 = 31.5 in.
Reviewed: 2026-09-05

LG opening envelope: 29.5 + 2.0 = 31.5 in.

Why this value was used

LG opening envelope: 29.5 + 2.0 = 31.5 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — 52c95cb8c1574734aba0dfcfeaeefebc58d032ef47a05296b040fb06258c9510.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model cached LG page: Installation Clearance Sides 1/8", Top 1", Back 2".
Reviewed: 2026-09-05

Official exact-model cached LG page: Installation Clearance Sides 1/8", Top 1", Back 2".

Why this value was used

Official exact-model cached LG page: Installation Clearance Sides 1/8", Top 1", Back 2".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — 52c95cb8c1574734aba0dfcfeaeefebc58d032ef47a05296b040fb06258c9510.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model cached LG page: Installation Clearance Sides 1/8", Top 1", Back 2".
Reviewed: 2026-09-05

Official exact-model cached LG page: Installation Clearance Sides 1/8", Top 1", Back 2".

Why this value was used

Official exact-model cached LG page: Installation Clearance Sides 1/8", Top 1", Back 2".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — 52c95cb8c1574734aba0dfcfeaeefebc58d032ef47a05296b040fb06258c9510.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model cached LG page: Installation Clearance Sides 1/8", Top 1", Back 2".
Reviewed: 2026-09-05

Official exact-model cached LG page: Installation Clearance Sides 1/8", Top 1", Back 2".

Why this value was used

Official exact-model cached LG page: Installation Clearance Sides 1/8", Top 1", Back 2".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — 52c95cb8c1574734aba0dfcfeaeefebc58d032ef47a05296b040fb06258c9510.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model cached LG page: Installation Clearance Sides 1/8", Top 1", Back 2".
Reviewed: 2026-09-05

Official exact-model cached LG page: Installation Clearance Sides 1/8", Top 1", Back 2".

Why this value was used

Official exact-model cached LG page: Installation Clearance Sides 1/8", Top 1", Back 2".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

4.06 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

LG measurement source — 52c95cb8c1574734aba0dfcfeaeefebc58d032ef47a05296b040fb06258c9510.json
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). Official exact-mod
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). Official exact-model cached LG page: Door Edge Clearance with Handle 4.06".

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). Official exact-model cached LG page: Door Edge Clearance with Handle 4.06".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.9375 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in = width_doors_closed_in

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

LG measurement source — LG_LB26H2200S_Bottom_Freezer_Refrigerators_LG_LB26H2200S.html
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Same-appliance endpoint inference: case width equals exact stored closed width 32.9375 in; manufactu
Reviewed: 2026-09-09

Same-appliance endpoint inference: case width equals exact stored closed width 32.9375 in; manufacturer does not label a separate case-width endpoint.

Why this value was used

Same-appliance endpoint inference: case width equals exact stored closed width 32.9375 in; manufacturer does not label a separate case-width endpoint. Calculation or inference: case_width_in = width_doors_closed_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.