This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-09-05. 5 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
Measurements and supporting evidence
Measurement
Value used
Evidence status
Primary source
Location
Details
Overall width
36 in
✓ Verified — exact model
20.8 Cu. Ft. Counter-Depth Side-by-Side Refrigerator with Exterior Ice and Water Dispenser and Removable Under-Shelf Wine Rack Fingerprint Resistant Stainless Steel KRSC336RPS | KitchenAid KitchenAid
Retained specification excerpt: net Width: 36.0 in | RGY STAR® Qualified Star K Certified Star K Certified UL Yes ### Dimensions Cab
Value used by ExactFit
36 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
20.8 Cu. Ft. Counter-Depth Side-by-Side Refrigerator with Exterior Ice and Water Dispenser and Removable Under-Shelf Wine Rack Fingerprint Resistant Stainless Steel KRSC336RPS | KitchenAid KitchenAid · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: net Width: 36.0 in | RGY STAR® Qualified Star K Certified Star K Certified UL Yes ### Dimensions Cab Reviewed: 2026-09-04
net Width: 36.0 in | RGY STAR® Qualified Star K Certified Star K Certified UL Yes ### Dimensions Cabinet Width 36 in Capacity 20.85 cu. ft. Cutout Width 36 in Depth 29.56 in Depth Closed Excluding
net Width: 36.0 in | RGY STAR® Qualified Star K Certified Star K Certified UL Yes ### Dimensions Cabinet Width 36 in Capacity 20.85 cu. ft. Cutout Width 36 in Depth 29.56 in Depth Closed Excluding
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
KitchenAid KRSC336RPS Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
20.8 Cu. Ft. Counter-Depth Side-by-Side Refrigerator with Exterior Ice and Water Dispenser and Removable Under-Shelf Wine Rack Fingerprint Resistant Stainless Steel KRSC336RPS | KitchenAid KitchenAid
Retained specification excerpt: Height To Top Of Door Hinge: 69.0 in | cu. ft. Gross Weight 270.6 lbs Height 69 in Height To Top Of
Value used by ExactFit
69 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
20.8 Cu. Ft. Counter-Depth Side-by-Side Refrigerator with Exterior Ice and Water Dispenser and Removable Under-Shelf Wine Rack Fingerprint Resistant Stainless Steel KRSC336RPS | KitchenAid KitchenAid · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Door Hinge: 69.0 in | cu. ft. Gross Weight 270.6 lbs Height 69 in Height To Top Of Reviewed: 2026-09-04
Height To Top Of Door Hinge: 69.0 in | cu. ft. Gross Weight 270.6 lbs Height 69 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 69 in Maximum Height 69 in Minimum Height 68.875 in Net Weight 260.6 lbs Refrigerator
Height To Top Of Door Hinge: 69.0 in | cu. ft. Gross Weight 270.6 lbs Height 69 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 69 in Maximum Height 69 in Minimum Height 68.875 in Net Weight 260.6 lbs Refrigerator
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
20.8 Cu. Ft. Counter-Depth Side-by-Side Refrigerator with Exterior Ice and Water Dispenser and Removable Under-Shelf Wine Rack Fingerprint Resistant Stainless Steel KRSC336RPS | KitchenAid KitchenAid
Retained specification excerpt: Depth Excluding Doors: 24.5 in | Depth Closed Excluding Handles 27.5 in Depth Closed Including Hand
Value used by ExactFit
24.5 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
20.8 Cu. Ft. Counter-Depth Side-by-Side Refrigerator with Exterior Ice and Water Dispenser and Removable Under-Shelf Wine Rack Fingerprint Resistant Stainless Steel KRSC336RPS | KitchenAid KitchenAid · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Excluding Doors: 24.5 in | Depth Closed Excluding Handles 27.5 in Depth Closed Including Hand Reviewed: 2026-09-04
Depth Excluding Doors: 24.5 in | Depth Closed Excluding Handles 27.5 in Depth Closed Including Handles 29.75 in Depth Excluding Doors 24.5 in Depth With Door Open 90 Degree 45.875 in Freezer Capacity Volume 6.98 cu. ft. G
Depth Excluding Doors: 24.5 in | Depth Closed Excluding Handles 27.5 in Depth Closed Including Handles 29.75 in Depth Excluding Doors 24.5 in Depth With Door Open 90 Degree 45.875 in Freezer Capacity Volume 6.98 cu. ft. G
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
KitchenAid KRSC336RPS Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
20.8 Cu. Ft. Counter-Depth Side-by-Side Refrigerator with Exterior Ice and Water Dispenser and Removable Under-Shelf Wine Rack Fingerprint Resistant Stainless Steel KRSC336RPS | KitchenAid KitchenAid
Retained specification excerpt: Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 29.75 in. Context:
Value used by ExactFit
29.75 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
20.8 Cu. Ft. Counter-Depth Side-by-Side Refrigerator with Exterior Ice and Water Dispenser and Removable Under-Shelf Wine Rack Fingerprint Resistant Stainless Steel KRSC336RPS | KitchenAid KitchenAid · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 29.75 in. Context: Reviewed: 2026-09-04
Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 29.75 in. Context: u. ft. Cutout Width 36 in Depth 29.56 in Depth Closed Excluding Handles 27.5 in Depth Closed Including Handles 29.75 in Depth Excluding Doors 24.5 in Depth With Door Open 90 Degree 45.875 in Freezer
Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 29.75 in. Context: u. ft. Cutout Width 36 in Depth 29.56 in Depth Closed Excluding Handles 27.5 in Depth Closed Including Handles 29.75 in Depth Excluding Doors 24.5 in Depth With Door Open 90 Degree 45.875 in Freezer
Other evidence found
29.25 in — superseded
103455895.pdf; page 1. Model scope: not separately recorded. Raw value: Depth - With Handles “B”
291/4" (74.3 cm). The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 29.75 in. Context: u. ft. Cutout Width 36 in Depth 29.56 in Depth Closed Excluding Handles 27.5 in Depth Closed Including Handles 29.75 in Depth Excluding Doors 24.5 in Depth With Door Open 90 Degree 45.875 in Freezer
Effect on fit result
This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
KitchenAid KRSC336RPS Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
20.8 Cu. Ft. Counter-Depth Side-by-Side Refrigerator with Exterior Ice and Water Dispenser and Removable Under-Shelf Wine Rack Fingerprint Resistant Stainless Steel KRSC336RPS | KitchenAid KitchenAid
Retained specification excerpt: Cutout Width: 36.0 in | ar K Certified UL Yes ### Dimensions Cabinet Width 36 in Capacity 20.85 cu.
Value used by ExactFit
36 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
20.8 Cu. Ft. Counter-Depth Side-by-Side Refrigerator with Exterior Ice and Water Dispenser and Removable Under-Shelf Wine Rack Fingerprint Resistant Stainless Steel KRSC336RPS | KitchenAid KitchenAid · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Cutout Width: 36.0 in | ar K Certified UL Yes ### Dimensions Cabinet Width 36 in Capacity 20.85 cu. Reviewed: 2026-09-04
Cutout Width: 36.0 in | ar K Certified UL Yes ### Dimensions Cabinet Width 36 in Capacity 20.85 cu. ft. Cutout Width 36 in Depth 29.56 in Depth Closed Excluding Handles 27.5 in Depth Closed Including Ha
Cutout Width: 36.0 in | ar K Certified UL Yes ### Dimensions Cabinet Width 36 in Capacity 20.85 cu. ft. Cutout Width 36 in Depth 29.56 in Depth Closed Excluding Handles 27.5 in Depth Closed Including Ha
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Minimum opening height derived from highest appliance endpoint 69.0 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202510/dimension-guide-w11753394-revc.pdf KitchenAid · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
Minimum opening depth derived from case-only depth 24.5 in plus documented rear clearance 1.0 in.
Minimum opening depth derived from case-only depth 24.5 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit
Unknown · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
KitchenAid measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-05
Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.
The retained record does not establish source scope or a resolvable supporting source.
Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit
Unknown · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
KitchenAid measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-05
Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.
The retained record does not establish source scope or a resolvable supporting source.
Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document
Confidence label: medium.
Primary evidence
KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05
1.27 cm) of space on each side and at the top Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern KRSC336R****
Confidence label: medium.
Primary evidence
KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202510/dimension-guide-w11753394-revc.pdf KitchenAid · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1" of space behind Calculation or inference: documented DOE model pattern KRSC336R****.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document
Confidence label: medium.
Primary evidence
KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05
20.8 Cu. Ft. Counter-Depth Side-by-Side Refrigerator with Exterior Ice and Water Dispenser and Removable Under-Shelf Wine Rack Fingerprint Resistant Stainless Steel KRSC336RPS | KitchenAid KitchenAid
Retained specification excerpt: Cabinet Width: 36.0 in | ENERGY STAR® Qualified Star K Certified Star K Certified UL Yes ### Dimens
Value used by ExactFit
36 in · Fit role: Informational only.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
20.8 Cu. Ft. Counter-Depth Side-by-Side Refrigerator with Exterior Ice and Water Dispenser and Removable Under-Shelf Wine Rack Fingerprint Resistant Stainless Steel KRSC336RPS | KitchenAid KitchenAid · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Cabinet Width: 36.0 in | ENERGY STAR® Qualified Star K Certified Star K Certified UL Yes ### Dimens Reviewed: 2026-09-04
Cabinet Width: 36.0 in | ENERGY STAR® Qualified Star K Certified Star K Certified UL Yes ### Dimensions Cabinet Width 36 in Capacity 20.85 cu. ft. Cutout Width 36 in Depth 29.56 in Depth Closed Excluding
Cabinet Width: 36.0 in | ENERGY STAR® Qualified Star K Certified Star K Certified UL Yes ### Dimensions Cabinet Width 36 in Capacity 20.85 cu. ft. Cutout Width 36 in Depth 29.56 in Depth Closed Excluding
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit
Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Freestanding Whirlpool-platform family side clearance
Confidence label: low.
Primary evidence
KitchenAid measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-04
Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.
Selected: 29.75 in. Earlier retained values: 29.25 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 29.75 in. Context: u. ft. Cutout Width 36 in Depth 29.56 in Depth Closed Excluding Handles 27.5 in Depth Closed Including Handles 29.75 in Depth Excluding Doors 24.5 in Depth With Door Open 90 Degree 45.875 in Freezer
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: KRSC336RPS.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Right-side ventilation clearance
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: KRSC336RPS.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Adjoining-wall clearance (reviewed endpoint)
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: KRSC336RPS.
A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
Source documents and pages
20.8 Cu. Ft. Counter-Depth Side-by-Side Refrigerator with Exterior Ice and Water Dispenser and Removable Under-Shelf Wine Rack Fingerprint Resistant Stainless Steel KRSC336RPS | KitchenAid
KitchenAid · Web source · exact model/source
Model numbers covered: KRSC336RPS. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
6 displayed measurements supported: Overall width; Height with hinge / controlling height; Depth without door; Depth with handle; Minimum cutout width; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.