Measurement evidence for KitchenAid KRMF436SPS

Value used by ExactFit

35.8125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid measurement source — 105602692.pdf
www.ramagefurnitureandappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-22

Guide W11783882A p.1 G Cabinet width 35 13/16" (909 mm), drawn across the door fronts; the KitchenAid 3D CAD model (KRMF436SPS) measures 35.80 in wide. Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).

Why this value was used

Guide W11783882A p.1 G Cabinet width 35 13/16" (909 mm), drawn across the door fronts; the KitchenAid 3D CAD model (KRMF436SPS) measures 35.80 in wide. Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).

Other evidence found

• 35.94 in — superseded

  www.ramagefurnitureandappliance.com; location not retained. Model scope: not separately recorded. Raw value: Plain exact-model specification row: Width = 35.94 in | KitchenAid Refrigerators KRMF436SPS (French 4-Door ... Specifications / Choose an option ; Width, 35.94 inch(es) / 91.29 cm ; Height (With Hinge), 70.06 inch(es) / 177.95 cm ; Overall Depth, 37.44 inch(es) / 95.1 cm. . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid installation document — 105602750.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

C* Height to top of cabinet -> 69" (1753 mm)

Why this value was used

C* Height to top of cabinet -> 69" (1753 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.0625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid measurement source — 240746KRG01-123_KRMF436SPS_CAD.zip
www.homedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model official manufacturer CAD OBJ bounding-box z-extent = 70.064693 in; visually checked ori
Reviewed: 2026-09-11

Exact-model official manufacturer CAD OBJ bounding-box z-extent = 70.064693 in; visually checked orientation/state and corroborates the retained published value 70.0625 in within the declared 1/8 in CAD-geometry tolerance. Raw geometric precision is not published.

Why this value was used

Exact-model official manufacturer CAD OBJ bounding-box z-extent = 70.064693 in; visually checked orientation/state and corroborates the retained published value 70.0625 in within the declared 1/8 in CAD-geometry tolerance. Raw geometric precision is not published.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid installation document — 105602750.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

F Depth without doors -> 297/8" (758.8 mm)

Why this value was used

F Depth without doors -> 297/8" (758.8 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid installation document — 105602750.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

E Depth with doors -> 34 3/4" (882.3 mm)

Why this value was used

E Depth with doors -> 34 3/4" (882.3 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

37.4375 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid measurement source — 105602750.pdf
KitchenAid · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-22

KitchenAid dimension guide W11783882A (KRMF436S**) p.1 table: P Depth with door handle 37 7/16" (951.3 mm). Replaces the rounded 37.44 in.

Why this value was used

KitchenAid dimension guide W11783882A (KRMF436S**) p.1 table: P Depth with door handle 37 7/16" (951.3 mm). Replaces the rounded 37.44 in.

Other evidence found

• 90 in — superseded

  www.abcwarehouse.com; location not retained. Model scope: not separately recorded. Raw value: product depth : Depth With Door Open 90 Degree . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗
• 37.44 in — superseded

  www.ramagefurnitureandappliance.com; location not retained. Model scope: not separately recorded. Raw value: Plain exact-model specification row: Overall Depth = 37.44 in | oose an option ; Width, 35.94 inch(es) / 91.29 cm ; Height (With Hinge), 70.06 inch(es) / 177.95 cm ; Overall Depth, 37.44 inch(es) / 95.1 cm. . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗
• 37.44 in — superseded

  www.kitchenaid.com; location not retained. Model scope: not separately recorded. Raw value: Exact-model official manufacturer CAD OBJ bounding-box y-extent = 37.524055 in; visually checked orientation/state and corroborates the retained published value 37.44 in within the declared 1/8 in CAD-geometry tolerance. Raw geometric precision is not published.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

KitchenAid measurement source — KRMF436SPS.html
www.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: utout Width: 36 47/250". Cutout Height: 70 47 ... Depth With Door Open 90 Degree: 49". Height: 70 1/
Reviewed: 2026-09-04

utout Width: 36 47/250". Cutout Height: 70 47 ... Depth With Door Open 90 Degree: 49". Height: 70 1/16". Height To Top Of

Why this value was used

utout Width: 36 47/250". Cutout Height: 70 47 ... Depth With Door Open 90 Degree: 49". Height: 70 1/16". Height To Top Of

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.8125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: width 35.8125 + 2 x 0.5

Confidence label: medium.

Primary evidence

KitchenAid measurement source — 105602692.pdf
www.bandjappliance.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-22

Cutout width = 35 13/16 in + 1/2 in on each side (guide p.2). Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).

Why this value was used

Cutout width = 35 13/16 in + 1/2 in on each side (guide p.2). Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md). Calculation or inference: width 35.8125 + 2 x 0.5.

Other evidence found

• 36.1875 in — superseded

  An earlier brand-wide assumption (no document for this model); location not retained. Model scope: not separately recorded. Raw value: KitchenAid KRMF436SJP cached matching-chassis specification. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.5625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

KitchenAid measurement source — dimension-guide-w11783882-reva.pdf
KitchenAid · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 70.0625 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 70.0625 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

KitchenAid measurement source — dimension-guide-w11783882-reva.pdf
KitchenAid · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern KRMF436SPS

Confidence label: high.

Primary evidence

KitchenAid measurement source — dimension-guide-w11783882-reva.pdf
KitchenAid · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern KRMF436SPS.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern KRMF436SPS

Confidence label: high.

Primary evidence

KitchenAid measurement source — dimension-guide-w11783882-reva.pdf
KitchenAid · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern KRMF436SPS.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern KRMF436SPS

Confidence label: medium.

Primary evidence

KitchenAid measurement source — dimension-guide-w11783882-reva.pdf
KitchenAid · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side and at the top

Why this value was used

1/2" space on each side and at the top Calculation or inference: documented DOE model pattern KRMF436SPS.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern KRMF436SPS

Confidence label: medium.

Primary evidence

KitchenAid measurement source — dimension-guide-w11783882-reva.pdf
KitchenAid · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

2" space behind

Why this value was used

2" space behind Calculation or inference: documented DOE model pattern KRMF436SPS.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

KitchenAid measurement source — 105602692.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave a minimum space of 3.75"

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave a minimum space of 3.75" Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

14.0625 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid measurement source — 105602692.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-14

14 1/16 in printed for door fully open at 135 degrees. Read by the verification agent (run Dfe9ddf0a76) from a document naming the model.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

14 1/16 in printed for door fully open at 135 degrees. Read by the verification agent (run Dfe9ddf0a76) from a document naming the model.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.8125 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid measurement source — 105602692.pdf
www.ramagefurnitureandappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-22

Guide W11783882A p.1 G Cabinet width 35 13/16" (909 mm), drawn across the door fronts; the KitchenAid 3D CAD model (KRMF436SPS) measures 35.80 in wide. Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).

Why this value was used

Guide W11783882A p.1 G Cabinet width 35 13/16" (909 mm), drawn across the door fronts; the KitchenAid 3D CAD model (KRMF436SPS) measures 35.80 in wide. Owner decision 2026-10-22 (variant-families-review-2026-10-22.owner-decisions.md).

Other evidence found

• 35.94 in — superseded

  www.ramagefurnitureandappliance.com; location not retained. Model scope: not separately recorded. Raw value: Low-confidence same-appliance width mapping: case_width_in=35.94 in from width_doors_closed_in.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗
• 35.94 in — superseded

  www.ramagefurnitureandappliance.com; location not retained. Model scope: not separately recorded. Raw value: Same-appliance endpoint inference: case width equals exact stored closed width 35.94 in; manufacturer does not label a separate case-width endpoint.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.