This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)
Last reviewed: 2026-09-07. 8 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | 35.75 in | ✓ Secondary source only | KitchenAid KBFN536TPA 36 Inch Panel Ready Built-In French Door Bottom Mount Refrigerator with 20.7 cu. ft. Total Capacity, Platinum Interior, Preserva®+ Cooling System, Automatic Ice Maker, FreshFlow™ Air Filter, Sabbath Mode, and Star-K Certified www.ajmadison.com | Retained specification excerpt: Exact-model cached specification: Width with Doors Closed 35 3/4 in. | |
Value used by ExactFit35.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceKitchenAid KBFN536TPA 36 Inch Panel Ready Built-In French Door Bottom Mount Refrigerator with 20.7 cu. ft. Total Capacity, Platinum Interior, Preserva®+ Cooling System, Automatic Ice Maker, FreshFlow™ Air Filter, Sabbath Mode, and Star-K Certified Exact-model cached specification: Width with Doors Closed 35 3/4 in.Open original source ↗ Why this value was usedExact-model cached specification: Width with Doors Closed 35 3/4 in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | 83.125 in | ✓ Secondary source only | KitchenAid® 36" 20.8 Cu. Ft. Panel Ready Built-In French ... www.tolsons.com | Retained specification excerpt: Height To Top Of Cabinet = 83.125 in | Cu. Ft. Panel Ready Built-In French Door Refrigerator with P | |
Value used by ExactFit83.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceKitchenAid® 36" 20.8 Cu. Ft. Panel Ready Built-In French ... Height To Top Of Cabinet = 83.125 in | Cu. Ft. Panel Ready Built-In French Door Refrigerator with Platinum Interior ; Height To Top Of Cabinet, 83.125 in ; Maximum Height, 84.75 in.Read moreOpen original source ↗ Why this value was usedHeight To Top Of Cabinet = 83.125 in | Cu. Ft. Panel Ready Built-In French Door Refrigerator with Platinum Interior ; Height To Top Of Cabinet, 83.125 in ; Maximum Height, 84.75 in.Read more Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 76.1875 in | ✓ Secondary source only | KitchenAid KBFN536TPA 36 Inch Panel Ready Built-In French Door Bottom Mount Refrigerator with 20.7 cu. ft. Total Capacity, Platinum Interior, Preserva®+ Cooling System, Automatic Ice Maker, FreshFlow™ Air Filter, Sabbath Mode, and Star-K Certified www.ajmadison.com | Retained specification excerpt: Exact-model table: Height To Top Of Door Hinge 76 3/16 in. | |
Value used by ExactFit76.1875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceKitchenAid KBFN536TPA 36 Inch Panel Ready Built-In French Door Bottom Mount Refrigerator with 20.7 cu. ft. Total Capacity, Platinum Interior, Preserva®+ Cooling System, Automatic Ice Maker, FreshFlow™ Air Filter, Sabbath Mode, and Star-K Certified Exact-model table: Height To Top Of Door Hinge 76 3/16 in.Open original source ↗ Why this value was usedExact-model table: Height To Top Of Door Hinge 76 3/16 in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | 22.375 in | ✓ Secondary source only | KitchenAid KBFN536TPA 36 Inch Panel Ready Built-In French Door Bottom Mount Refrigerator with 20.7 cu. ft. Total Capacity, Platinum Interior, Preserva®+ Cooling System, Automatic Ice Maker, FreshFlow™ Air Filter, Sabbath Mode, and Star-K Certified www.ajmadison.com | Retained specification excerpt: Exact-model cached specification: Depth without Door 22 3/8 in. | |
Value used by ExactFit22.375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceKitchenAid KBFN536TPA 36 Inch Panel Ready Built-In French Door Bottom Mount Refrigerator with 20.7 cu. ft. Total Capacity, Platinum Interior, Preserva®+ Cooling System, Automatic Ice Maker, FreshFlow™ Air Filter, Sabbath Mode, and Star-K Certified Exact-model cached specification: Depth without Door 22 3/8 in.Open original source ↗ Why this value was usedExact-model cached specification: Depth without Door 22 3/8 in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 24 in | ✓ Secondary source only | KitchenAid KBFN536TPA 36 Inch Panel Ready Built-In French Door Bottom Mount Refrigerator with 20.7 cu. ft. Total Capacity, Platinum Interior, Preserva®+ Cooling System, Automatic Ice Maker, FreshFlow™ Air Filter, Sabbath Mode, and Star-K Certified www.ajmadison.com | Retained specification excerpt: Exact-model cached specification: Depth without Handles 24 in. | |
Value used by ExactFit24 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceKitchenAid KBFN536TPA 36 Inch Panel Ready Built-In French Door Bottom Mount Refrigerator with 20.7 cu. ft. Total Capacity, Platinum Interior, Preserva®+ Cooling System, Automatic Ice Maker, FreshFlow™ Air Filter, Sabbath Mode, and Star-K Certified Exact-model cached specification: Depth without Handles 24 in.Open original source ↗ Why this value was usedExact-model cached specification: Depth without Handles 24 in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 24 in | ✓ Secondary source only | KitchenAid KBFN536TPA 36 Inch Panel Ready Built-In French Door Bottom Mount Refrigerator with 20.7 cu. ft. Total Capacity, Platinum Interior, Preserva®+ Cooling System, Automatic Ice Maker, FreshFlow™ Air Filter, Sabbath Mode, and Star-K Certified www.ajmadison.com | Retained specification excerpt: Exact-model table: Depth 24 in and Depth Closed Excluding Handles 24 in for panel-ready product. | |
Value used by ExactFit24 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceKitchenAid KBFN536TPA 36 Inch Panel Ready Built-In French Door Bottom Mount Refrigerator with 20.7 cu. ft. Total Capacity, Platinum Interior, Preserva®+ Cooling System, Automatic Ice Maker, FreshFlow™ Air Filter, Sabbath Mode, and Star-K Certified Exact-model table: Depth 24 in and Depth Closed Excluding Handles 24 in for panel-ready product.Open original source ↗ Why this value was usedExact-model table: Depth 24 in and Depth Closed Excluding Handles 24 in for panel-ready product. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 41 in | ✓ Secondary source only | Shop Kitchenaid® 20.8 Cu. Ft. 36" Built-In Panel-Ready French Door Bottom Mount Refrigerator with Platinum Interior KBFN536TPA | Shuh's Appliance Centre shuhappliance.com | Retained specification excerpt: dth36 Inch Wide Depth Closed Excluding Handles24" Depth With Door Open 90 Degree41" Cutout Width36" | |
Value used by ExactFit41 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceShop Kitchenaid® 20.8 Cu. Ft. 36" Built-In Panel-Ready French Door Bottom Mount Refrigerator with Platinum Interior KBFN536TPA | Shuh's Appliance Centre dth36 Inch Wide Depth Closed Excluding Handles24" Depth With Door Open 90 Degree41" Cutout Width36" Cabinet Width36" Depth ExcludingOpen original source ↗ Why this value was useddth36 Inch Wide Depth Closed Excluding Handles24" Depth With Door Open 90 Degree41" Cutout Width36" Cabinet Width36" Depth Excluding Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | 36 in | ✓ Secondary source only | Shop Kitchenaid® 20.8 Cu. Ft. 36" Built-In Panel-Ready French Door Bottom Mount Refrigerator with Platinum Interior KBFN536TPA | Shuh's Appliance Centre shuhappliance.com | Retained specification excerpt: ding Handles24" Depth With Door Open 90 Degree41" Cutout Width36" Cabinet Width36" Depth Excluding D | |
Value used by ExactFit36 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceShop Kitchenaid® 20.8 Cu. Ft. 36" Built-In Panel-Ready French Door Bottom Mount Refrigerator with Platinum Interior KBFN536TPA | Shuh's Appliance Centre ding Handles24" Depth With Door Open 90 Degree41" Cutout Width36" Cabinet Width36" Depth Excluding Doors22.38" HeigOpen original source ↗ Why this value was usedding Handles24" Depth With Door Open 90 Degree41" Cutout Width36" Cabinet Width36" Depth Excluding Doors22.38" Heig Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | 84 in | ✓ Secondary source only · Calculated/inferred | KitchenAid KBFN536TPA Installation Instruction assets.skulytics.io | Page 9 | |
Value used by ExactFit84 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: declared_multi_model_scope Confidence label: medium. Primary evidenceKitchenAid KBFN536TPA Installation Instruction Opening Height (H) Closed Recommended: 84"Open original source ↗ Why this value was usedOpening Height (H) Closed Recommended: 84" Calculation or inference: cached document family mapping: declared_multi_model_scope. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | 25 in | ✓ Verified — equivalent model · Calculated/inferred | KitchenAid KBSN742TPA Installation Instruction assets.skulytics.io | Page 9 | |
Value used by ExactFit25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: KBFN panel-ready built-in opening depth Confidence label: medium. Primary evidenceKitchenAid KBSN742TPA Installation Instruction Documented KitchenAid panel-ready built-in family opening table: Opening Depth (D), FLUSH Minimum 25".Open original source ↗ Why this value was usedDocumented KitchenAid panel-ready built-in family opening table: Opening Depth (D), FLUSH Minimum 25". Calculation or inference: KBFN panel-ready built-in opening depth. Why evidence from KBSN742TPA appliesTarget model: KBFN536TPA. Supporting model: KBSN742TPA. Manufacturer: KitchenAid. Product family and measurement relationship: KBFN panel-ready built-in opening depth. Measurement transferred: Minimum cutout depth. Relevant equivalence evidence: Documented KitchenAid panel-ready built-in family opening table: Opening Depth (D), FLUSH Minimum 25".. Known differences: not separately recorded. Review decision: documented model family opening depth; 2026-09-07. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | Unknown | ? Not found | KitchenAid measurement source — local-cache manufacturer-family consensus Publisher not recorded | Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKitchenAid measurement source — local-cache manufacturer-family consensus Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedThe retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.188 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | Unknown | ? Not found | KitchenAid measurement source — local-cache manufacturer-family consensus Publisher not recorded | Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKitchenAid measurement source — local-cache manufacturer-family consensus Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedThe retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.188 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | Unknown | ? Not found | KitchenAid KBFN536SPS Dimension Guide assets.skulytics.io | Page 6 | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKitchenAid KBFN536SPS Dimension Guide Exact-model installation guide: A clearance of 3/4" (19 mm) must be maintained above the top grille.Open original source ↗ Why this value was usedThe stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 0.75 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | 2.625 in | ✓ Verified — equivalent model · Calculated/inferred | KitchenAid KBSN742TPA Installation Instruction assets.skulytics.io | Page 9 | |
Value used by ExactFit2.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: min_cutout_depth_in - depth_case_only_in Confidence label: medium. Calculation inputs: Depth without door; Minimum cutout depth; Primary evidenceKitchenAid KBSN742TPA Installation Instruction KitchenAid built-in opening residual: 25.0 - 22.375 = 2.625 in behind the case within the accepted opening.Open original source ↗ Why this value was usedKitchenAid built-in opening residual: 25.0 - 22.375 = 2.625 in behind the case within the accepted opening. Calculation or inference: min_cutout_depth_in - depth_case_only_in. Why evidence from KBSN742TPA appliesTarget model: KBFN536TPA. Supporting model: KBSN742TPA. Manufacturer: KitchenAid. Product family and measurement relationship: min_cutout_depth_in - depth_case_only_in. Measurement transferred: Rear clearance. Relevant equivalence evidence: KitchenAid built-in opening residual: 25.0 - 22.375 = 2.625 in behind the case within the accepted opening.. Known differences: not separately recorded. Review decision: verified built in opening residual formula; 2026-09-07. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Hinge-side wall clearance | Unknown | ? Not found · Calculated/inferred | KitchenAid KBSN748TPA Installation Instruction assets.skulytics.io | Page 7 | |
Value used by ExactFitUnknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: full-size KitchenAid built-in hinge platform minimum Confidence label: medium. Primary evidenceKitchenAid KBSN748TPA Installation Instruction KitchenAid built-in door-swing guide: allow 4 1/2" minimum between the refrigerator side and a corner wall; more may be needed for custom panels or extended handles.Open original source ↗ Why this value was usedThe stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 4.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | 36 in | ✓ Secondary source only | Shop Kitchenaid® 20.8 Cu. Ft. 36" Built-In Panel-Ready French Door Bottom Mount Refrigerator with Platinum Interior KBFN536TPA | Shuh's Appliance Centre shuhappliance.com | Retained specification excerpt: Depth With Door Open 90 Degree41" Cutout Width36" Cabinet Width36" Depth Excluding Doors22.38" Heigh | |
Value used by ExactFit36 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidenceShop Kitchenaid® 20.8 Cu. Ft. 36" Built-In Panel-Ready French Door Bottom Mount Refrigerator with Platinum Interior KBFN536TPA | Shuh's Appliance Centre Depth With Door Open 90 Degree41" Cutout Width36" Cabinet Width36" Depth Excluding Doors22.38" Height To Top Of CabiOpen original source ↗ Why this value was usedDepth With Door Open 90 Degree41" Cutout Width36" Cabinet Width36" Depth Excluding Doors22.38" Height To Top Of Cabi Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Adjoining-wall clearance (reviewed endpoint) | Unknown | ? Not found · Calculated/inferred | KitchenAid measurement source — local-cache manufacturer-family consensus Publisher not recorded | Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p | |
Value used by ExactFitUnknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Tall built-in family side clearance Confidence label: low. Primary evidenceKitchenAid measurement source — local-cache manufacturer-family consensus Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedA low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 0.1875 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: 106162542.pdf. Related-model record: KBFN536SPS.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: 106162839.pdf. Related-model record: KBSN748TPA.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
www.ajmadison.com · Web source · secondary model/source
Model numbers covered: KBFN536TPA. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
5 displayed measurements supported: Overall width; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗www.tolsons.com · Web source · secondary model/source
Model numbers covered: KBFN536TPA. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
1 displayed measurements supported: Cabinet height.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗shuhappliance.com · Web source · secondary model/source
Model numbers covered: KBFN536TPA. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
3 displayed measurements supported: Depth with doors open at 90°; Minimum cutout width; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Installation Instruction · secondary model/source
Model numbers covered: KBFN536TPA. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
1 displayed measurements supported: Minimum cutout height.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Installation Instruction · equivalent model/source
Model numbers covered: KBSN742TPA. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
2 displayed measurements supported: Minimum cutout depth; Rear clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Publisher not recorded · Retained document · Scope not established
Model numbers covered: Not explicitly retained. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
3 displayed measurements supported: Left-side ventilation clearance; Right-side ventilation clearance; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL unavailable in the record.
assets.skulytics.io · Dimension Guide · Scope not established
Model numbers covered: KBFN536SPS. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
1 displayed measurements supported: Top clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Installation Instruction · Scope not established
Model numbers covered: KBSN748TPA. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
1 displayed measurements supported: Hinge-side wall clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Evidence reflects the sources reviewed on 2026-09-07. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.