Measurement evidence for KitchenAid KBBX102MPA

Value used by ExactFit

21.9375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid installation document — 90393622.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Product Dimensions: unit width 21 15/16" (557 mm).

Why this value was used

Product Dimensions: unit width 21 15/16" (557 mm).

Other evidence found

• 21.929134 in — superseded

  www.tascoappliance.ca; location not retained. Model scope: not separately recorded. Raw value: Plain exact-model specification row: Width = 21.929134 in | eight | 61.51 kg, 135.6 lbs | | Height | 176.99 cm, 69.68 in | | Net Weight | 60.01 kg, 132.3 lbs | | Width | 55.70 cm, 21.93 in | | Exterior Details | | | Base Grille Color | White | | Electrical | | | Amps | 15 | | Volts | 110 | | Dimen. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.6875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid installation document — 90393622.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Product Dimensions: unit height 69 11/16" (1770 mm).

Why this value was used

Product Dimensions: unit height 69 11/16" (1770 mm).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.6875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid installation document — 90393622.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Product Dimensions: overall unit height 69 11/16"; hinge is contained within the built-in envelope.

Why this value was used

Product Dimensions: overall unit height 69 11/16"; hinge is contained within the built-in envelope.

Other evidence found

• 69.681102 in — superseded

  www.tascoappliance.ca; location not retained. Model scope: not separately recorded. Raw value: Plain exact-model specification row: Height = 69.681102 in | | | | --- | | Dimensions | | | Depth | 54.43 cm, 21.43 in | | Gross Weight | 61.51 kg, 135.6 lbs | | Height | 176.99 cm, 69.68 in | | Net Weight | 60.01 kg, 132.3 lbs | | Width | 55.70 cm, 21.93 in | | Exterior Details | | | Base Grille Co. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

21.4375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid installation document — 90393622.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Product Dimensions: unit depth front-to-back 21 7/16" (545 mm).

Why this value was used

Product Dimensions: unit depth front-to-back 21 7/16" (545 mm).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

21.4375 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Panel-ready built-in unit depth; decorative panel and handle are supplied separately

Confidence label: medium.

Primary evidence

KitchenAid measurement source — 90393622.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Product depth is 21 7/16"; panel-ready appliance has no manufacturer-supplied projecting handle.

Why this value was used

Product depth is 21 7/16"; panel-ready appliance has no manufacturer-supplied projecting handle. Calculation or inference: Panel-ready built-in unit depth; decorative panel and handle are supplied separately.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

21.4375 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Manufacturer appliance envelope excludes customer-selected decorative handle

Confidence label: medium.

Primary evidence

KitchenAid measurement source — 90393622.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Product depth is exactly 21 7/16" (545 mm); prior value was a metric decimal approximation.

Why this value was used

Product depth is exactly 21 7/16" (545 mm); prior value was a metric decimal approximation. Calculation or inference: Manufacturer appliance envelope excludes customer-selected decorative handle.

Other evidence found

• 21.429134 in — superseded

  www.tascoappliance.ca; location not retained. Model scope: not separately recorded. Raw value: Plain exact-model specification row: Depth = 21.429134 in | KitchenAid KBBX102MPA ## Product Spotlight ## Tech Specs | | | --- | | Dimensions | | | Depth | 54.43 cm, 21.43 in | | Gross Weight | 61.51 kg, 135.6 lbs | | Height | 176.99 cm, 69.68 in | | Net Weight | 60.01 kg, 132.3 lbs . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

43.82 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: (545 mm body depth + 594 mm max door panel width - 46 mm hinge offset + 20 mm panel thickness) / 25.4

Confidence label: medium.

Primary evidence

KitchenAid measurement source — KBBX102MPA-90393622.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-07

Exact 90-degree envelope from labeled drawing geometry: (545 + 594 - 46 + 20) mm = 1113 mm = 43.82 in.

Why this value was used

Exact 90-degree envelope from labeled drawing geometry: (545 + 594 - 46 + 20) mm = 1113 mm = 43.82 in. Calculation or inference: (545 mm body depth + 594 mm max door panel width - 46 mm hinge offset + 20 mm panel thickness) / 25.4.

Other evidence found

• 21.4375 in — superseded

  Document 90393622.pdf; page 2. Model scope: not separately recorded. Raw value: Dimension guide shows a flush built-in installation and maximum 105-degree door swing; at 90 degrees the door does not increase the 21 7/16" back-to-front envelope.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

22.0625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid installation document — 90393622.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Opening Dimensions: inside frame minimum width B = 22 1/16" (560 mm).

Why this value was used

Opening Dimensions: inside frame minimum width B = 22 1/16" (560 mm).

Other evidence found

• 22.92913 in — superseded

  An earlier brand-wide assumption (no document for this model); location not retained. Model scope: not separately recorded. Raw value: Derived minimum opening width 22.92913 in from product width 21.929134 in and explicit 0.5 in clearance on each side.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.9375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid measurement source — 90393620.pdf
KitchenAid · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-18

Minimum inside frame opening height, dimension A: 69 15/16" (1776 mm); printed in 90393620.pdf page 8 and 90393622.pdf page 1. Replaces a calculated 71 11/16 in.

Why this value was used

Minimum inside frame opening height, dimension A: 69 15/16" (1776 mm); printed in 90393620.pdf page 8 and 90393622.pdf page 1. Replaces a calculated 71 11/16 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

21.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid installation document — 90393622.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Exact-model opening table: inside of frame minimum depth 21 7/8" (555 mm).

Why this value was used

Exact-model opening table: inside of frame minimum depth 21 7/8" (555 mm).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.0625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: (min_cutout_width_in - width_doors_closed_in) / 2

Confidence label: medium.

Calculation inputs: Overall width; Minimum cutout width;

Primary evidence

KitchenAid measurement source — 90393622.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Exact frame width 22.0625 minus appliance width 21.9375, divided equally between sides = 0.0625 in.

Why this value was used

Exact frame width 22.0625 minus appliance width 21.9375, divided equally between sides = 0.0625 in. Calculation or inference: (min_cutout_width_in - width_doors_closed_in) / 2.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.0625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: (min_cutout_width_in - width_doors_closed_in) / 2

Confidence label: medium.

Calculation inputs: Overall width; Minimum cutout width;

Primary evidence

KitchenAid measurement source — 90393622.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Exact frame width 22.0625 minus appliance width 21.9375, divided equally between sides = 0.0625 in.

Why this value was used

Exact frame width 22.0625 minus appliance width 21.9375, divided equally between sides = 0.0625 in. Calculation or inference: (min_cutout_width_in - width_doors_closed_in) / 2.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: min_cutout_height_in - max(height_case_in,height_hinge_in)

Confidence label: high.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Minimum cutout height;

Primary evidence

KitchenAid measurement source — 90393622.pdf
KitchenAid · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-19

Gap inside the cabinet frame: minimum frame opening height 69 15/16" (1776 mm, dimension A) minus unit height 69 11/16" (1770 mm) = 1/4 in, as the upper-hinge detail shows. The guide also asks for "a clearance minimum of 2" (50 mm) at the top of the frame": ventilation space above the frame, outside the opening. Owner decision 2026-09-19.

Why this value was used

Gap inside the cabinet frame: minimum frame opening height 69 15/16" (1776 mm, dimension A) minus unit height 69 11/16" (1770 mm) = 1/4 in, as the upper-hinge detail shows. The guide also asks for "a clearance minimum of 2" (50 mm) at the top of the frame": ventilation space above the frame, outside the opening. Owner decision 2026-09-19. Calculation or inference: min_cutout_height_in - max(height_case_in,height_hinge_in).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.4375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: min_cutout_depth_in - depth_case_only_in

Confidence label: medium.

Calculation inputs: Depth without door; Minimum cutout depth;

Primary evidence

KitchenAid measurement source — 90393622.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Exact frame depth 21.875 minus case depth 21.4375 = 0.4375 in unobstructed rear space.

Why this value was used

Exact frame depth 21.875 minus case depth 21.4375 = 0.4375 in unobstructed rear space. Calculation or inference: min_cutout_depth_in - depth_case_only_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

21.9375 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid installation document — 90393622.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Product Dimensions: unit width 21 15/16" (557 mm).

Why this value was used

Product Dimensions: unit width 21 15/16" (557 mm).

Other evidence found

• 21.929134 in — superseded

  www.tascoappliance.ca; location not retained. Model scope: not separately recorded. Raw value: Low-confidence same-appliance width mapping: case_width_in=21.929134 in from width_doors_closed_in.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.