This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Bottom Freezer · Unknown depth class
Market status: Active (recorded 2026-08-17)
Last reviewed: 2026-09-05. 6 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | 35.1875 in | ✓ Secondary source only | KitchenAid KBBR336SPS Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit35.1875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKitchenAid KBBR336SPS Dimension Guide B Overall Width = 35 3/16"Open original source ↗ Why this value was usedB Overall Width = 35 3/16" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | Unknown | ? Not found | KitchenAid KBBL336SPS Dimension Guide assets.skulytics.io | Page 4 | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKitchenAid KBBL336SPS Dimension Guide Visual side-view table: Cabinet Height = 74 3/8 in.Open original source ↗ Why this value was usedThe stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 74.375 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found
Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 83.25 in | ✓ Secondary source only | KitchenAid KBBR336SPS Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit83.25 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKitchenAid KBBR336SPS Dimension Guide A Overall Height = 83 1/4"Open original source ↗ Why this value was usedA Overall Height = 83 1/4" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | 23.7 in | ✓ Verified — exact model | 20.8 Cu. Ft. 36-Inch Built-In Bottom Mount Refrigerator with Right Door Swing and Signature Platinum Interior in PrintShield® Finish Stainless Steel with PrintShield™ Finish KBBR336SPS | KitchenAid KitchenAid | Retained specification excerpt: Depth Excluding Doors 23.7 in | |
Value used by ExactFit23.7 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence20.8 Cu. Ft. 36-Inch Built-In Bottom Mount Refrigerator with Right Door Swing and Signature Platinum Interior in PrintShield® Finish Stainless Steel with PrintShield™ Finish KBBR336SPS | KitchenAid Depth Excluding Doors 23.7 inOpen original source ↗ Why this value was usedDepth Excluding Doors 23.7 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 25 in | ✓ Secondary source only | KitchenAid KBBR336SPS Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit25 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKitchenAid KBBR336SPS Dimension Guide Depth without Handle 25" (635.8 mm)Open original source ↗ Why this value was usedDepth without Handle 25" (635.8 mm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 27.75 in | ✓ Secondary source only | KitchenAid KBBR336SPS Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit27.75 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKitchenAid KBBR336SPS Dimension Guide D Depth with Handle = 27 3/4"Open original source ↗ Why this value was usedD Depth with Handle = 27 3/4" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 59 in | ✓ Verified — exact model | 20.8 Cu. Ft. 36-Inch Built-In Bottom Mount Refrigerator with Right Door Swing and Signature Platinum Interior in PrintShield® Finish Stainless Steel with PrintShield™ Finish KBBR336SPS | KitchenAid KitchenAid | Retained specification excerpt: Depth With Door Open 90 = 59.0 in | es 25.1 in Depth Closed Including Handles 27.8 in Depth Excludin | |
Value used by ExactFit59 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence20.8 Cu. Ft. 36-Inch Built-In Bottom Mount Refrigerator with Right Door Swing and Signature Platinum Interior in PrintShield® Finish Stainless Steel with PrintShield™ Finish KBBR336SPS | KitchenAid Depth With Door Open 90 = 59.0 in | es 25.1 in Depth Closed Including Handles 27.8 in Depth Excluding Doors 23.7 in Depth With Door Open 90 Degree 59 in Freezer Capacity Volume 5.6 cu. ft. Gross Weight 566.5 lbs Height 83.25 in HeigOpen original source ↗ Why this value was usedDepth With Door Open 90 = 59.0 in | es 25.1 in Depth Closed Including Handles 27.8 in Depth Excluding Doors 23.7 in Depth With Door Open 90 Degree 59 in Freezer Capacity Volume 5.6 cu. ft. Gross Weight 566.5 lbs Height 83.25 in Heig Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | 37.25 in | ✓ Secondary source only | KitchenAid KBBR336SPS Dimension Guide assets.skulytics.io | Page 7 | |
Value used by ExactFit37.25 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKitchenAid KBBR336SPS Dimension Guide Model Total Opening Width (W) Width Between Cleats (X) -> 36" 371/4" to 371/2" (946 mm to 952 mm) 351/2" to 353/4" (902 mm to 908 mm)Open original source ↗ Why this value was usedModel Total Opening Width (W) Width Between Cleats (X) -> 36" 371/4" to 371/2" (946 mm to 952 mm) 351/2" to 353/4" (902 mm to 908 mm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | 83.5 in | ✓ Verified — exact model | 20.8 Cu. Ft. 36-Inch Built-In Bottom Mount Refrigerator with Right Door Swing and Signature Platinum Interior in PrintShield® Finish Stainless Steel with PrintShield™ Finish KBBR336SPS | KitchenAid KitchenAid | Retained specification excerpt: Cutout Height 83.5 in | |
Value used by ExactFit83.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence20.8 Cu. Ft. 36-Inch Built-In Bottom Mount Refrigerator with Right Door Swing and Signature Platinum Interior in PrintShield® Finish Stainless Steel with PrintShield™ Finish KBBR336SPS | KitchenAid Cutout Height 83.5 inOpen original source ↗ Why this value was usedCutout Height 83.5 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | 24 in | ✓ Verified — exact model | 20.8 Cu. Ft. 36-Inch Built-In Bottom Mount Refrigerator with Right Door Swing and Signature Platinum Interior in PrintShield® Finish Stainless Steel with PrintShield™ Finish KBBR336SPS | KitchenAid KitchenAid | Retained specification excerpt: Cutout Depth 24 in | |
Value used by ExactFit24 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence20.8 Cu. Ft. 36-Inch Built-In Bottom Mount Refrigerator with Right Door Swing and Signature Platinum Interior in PrintShield® Finish Stainless Steel with PrintShield™ Finish KBBR336SPS | KitchenAid Cutout Depth 24 inOpen original source ↗ Why this value was usedCutout Depth 24 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | Unknown | ? Not found | KitchenAid measurement source — local-cache manufacturer-family consensus Publisher not recorded | Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKitchenAid measurement source — local-cache manufacturer-family consensus Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedThe retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.188 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | Unknown | ? Not found | KitchenAid measurement source — local-cache manufacturer-family consensus Publisher not recorded | Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKitchenAid measurement source — local-cache manufacturer-family consensus Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedThe retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.188 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | 0.75 in | ✓ Secondary source only | KitchenAid KBBR336SPS Dimension Guide assets.skulytics.io | Page 6 | |
Value used by ExactFit0.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKitchenAid KBBR336SPS Dimension Guide Exact-model installation guide: A clearance of 3/4" (19 mm) must be maintained above the top grille.Open original source ↗ Why this value was usedExact-model installation guide: A clearance of 3/4" (19 mm) must be maintained above the top grille. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | 0.3 in | ✓ Verified — exact model · Calculated/inferred | 20.8 Cu. Ft. 36-Inch Built-In Bottom Mount Refrigerator with Right Door Swing and Signature Platinum Interior in PrintShield® Finish Stainless Steel with PrintShield™ Finish KBBR336SPS | KitchenAid KitchenAid | Retained specification excerpt: KitchenAid built-in opening residual: 24.0 - 23.7 = 0.3 in behind the case within the accepted openi | |
Value used by ExactFit0.3 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: min_cutout_depth_in - depth_case_only_in Confidence label: medium. Calculation inputs: Depth without door; Minimum cutout depth; Primary evidence20.8 Cu. Ft. 36-Inch Built-In Bottom Mount Refrigerator with Right Door Swing and Signature Platinum Interior in PrintShield® Finish Stainless Steel with PrintShield™ Finish KBBR336SPS | KitchenAid KitchenAid built-in opening residual: 24.0 - 23.7 = 0.3 in behind the case within the accepted opening.Open original source ↗ Why this value was usedKitchenAid built-in opening residual: 24.0 - 23.7 = 0.3 in behind the case within the accepted opening. Calculation or inference: min_cutout_depth_in - depth_case_only_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Hinge-side wall clearance | Unknown | ? Not found · Calculated/inferred | KitchenAid KBSN748TPA Installation Instruction assets.skulytics.io | Page 7 | |
Value used by ExactFitUnknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: full-size KitchenAid built-in hinge platform minimum Confidence label: medium. Primary evidenceKitchenAid KBSN748TPA Installation Instruction KitchenAid built-in door-swing guide: allow 4 1/2" minimum between the refrigerator side and a corner wall; more may be needed for custom panels or extended handles.Open original source ↗ Why this value was usedThe stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 4.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | 35.1875 in | ✓ Secondary source only | KitchenAid KBBR336SPS Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit35.1875 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKitchenAid KBBR336SPS Dimension Guide Overall Width -> 353∕16" (894.3 mm)Open original source ↗ Why this value was usedOverall Width -> 353∕16" (894.3 mm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Adjoining-wall clearance (reviewed endpoint) | Unknown | ? Not found · Calculated/inferred | KitchenAid measurement source — local-cache manufacturer-family consensus Publisher not recorded | Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p | |
Value used by ExactFitUnknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Tall built-in family side clearance Confidence label: low. Primary evidenceKitchenAid measurement source — local-cache manufacturer-family consensus Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedA low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 0.1875 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Selected: Unknown. Earlier retained values: 83.25 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
View source scope, location, and impact on fitNot found for safe fit use. Sources retained: 106162578.pdf. Related-model record: KBBL336SPS.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: 106162839.pdf. Related-model record: KBSN748TPA.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
assets.skulytics.io · Dimension Guide · secondary model/source
Model numbers covered: KBBR336SPS. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
6 displayed measurements supported: Overall width; Height with hinge / controlling height; Depth with door, without handles; Depth with handle; Minimum cutout width; Top clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Dimension Guide · Scope not established
Model numbers covered: KBBL336SPS. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
1 displayed measurements supported: Cabinet height.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗KitchenAid · Web source · exact model/source
Model numbers covered: KBBR336SPS. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
5 displayed measurements supported: Depth without door; Depth with doors open at 90°; Minimum cutout height; Minimum cutout depth; Rear clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Publisher not recorded · Retained document · Scope not established
Model numbers covered: Not explicitly retained. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
3 displayed measurements supported: Left-side ventilation clearance; Right-side ventilation clearance; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL unavailable in the record.
assets.skulytics.io · Installation Instruction · Scope not established
Model numbers covered: KBSN748TPA. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
1 displayed measurements supported: Hinge-side wall clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Dimension Guide · secondary model/source
Model numbers covered: KBBR336SPS. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
1 displayed measurements supported: Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.