This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-11-15. 5 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row says where its value comes from.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Kenmore measurement source — kenmore-use-care-61332_manual.pdf i.sears.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-11-14
Own Kenmore Use & Care Guide kenmore-use-care-61332_manual.pdf p8 (https://i.sears.com/s/d/pdf/mp-tc/10672550/prod_27603924512), SPECIFICATIONS table, column 899.6231#, EXTERNAL DIMENSIONS row "WIDTH": "29.5 in". Read on the page image 2026-11-02. (Was 29.53 from the kenmore.com product page; the printed figure replaces it.) Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231#: "WIDTH" "29.5 in". AGREE: use the model-family printed width instead of website precision.
Own Kenmore Use & Care Guide kenmore-use-care-61332_manual.pdf p8 (https://i.sears.com/s/d/pdf/mp-tc/10672550/prod_27603924512), SPECIFICATIONS table, column 899.6231#, EXTERNAL DIMENSIONS row "WIDTH": "29.5 in". Read on the page image 2026-11-02. (Was 29.53 from the kenmore.com product page; the printed figure replaces it.) Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231#: "WIDTH" "29.5 in". AGREE: use the model-family printed width instead of website precision.
Other evidence found
29.53 in — superseded
Document 62312.html; location not retained. Model scope: not separately recorded. Raw value: Official Kenmore structured product specification.. The final reviewed registry supersedes this earlier audit value.
29.53 in — superseded
www.kenmore.com; location not retained. Model scope: not separately recorded. Raw value: kenmore.com product page https://www.kenmore.com/products/kenmore-62312-18-2-cu-ft-top-freezer-refrigerator-8211-white/ lists: "Width w/ Door Closed (In.):29.53". Maker website figure.. The final reviewed registry supersedes this earlier audit value.
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Official Kenmore structured product specification.
Value used by ExactFit
65.79 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Kenmore measurement source — 62312.html Kenmore · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Official Kenmore structured product specification. Reviewed: 2026-09-04
Official Kenmore structured product specification.
Official Kenmore structured product specification.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Kenmore measurement source — kenmore-use-care-61332_manual.pdf i.sears.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-11-14
Own Kenmore Use & Care Guide kenmore-use-care-61332_manual.pdf p8 (https://i.sears.com/s/d/pdf/mp-tc/10672550/prod_27603924512), SPECIFICATIONS table, column 899.6231#, EXTERNAL DIMENSIONS row "HIGH": "66.38 in". Read on the page image 2026-11-02. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231#: "HIGH" "66.38 in" under EXTERNAL DIMENSIONS; overall height. AGREE: printed external height is the tallest supplied height.
Own Kenmore Use & Care Guide kenmore-use-care-61332_manual.pdf p8 (https://i.sears.com/s/d/pdf/mp-tc/10672550/prod_27603924512), SPECIFICATIONS table, column 899.6231#, EXTERNAL DIMENSIONS row "HIGH": "66.38 in". Read on the page image 2026-11-02. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231#: "HIGH" "66.38 in" under EXTERNAL DIMENSIONS; overall height. AGREE: printed external height is the tallest supplied height.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Kenmore measurement source — https://www.kenmore.com/products/kenmore-62312-18-2-cu-ft-top-freezer-refrigerator-8211-white/ Kenmore · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: kenmore.com product page https://www.kenmore.com/products/kenmore-62312-18-2-cu-ft-top-freezer-refri Reviewed: 2026-11-02
kenmore.com product page https://www.kenmore.com/products/kenmore-62312-18-2-cu-ft-top-freezer-refrigerator-8211-white/ lists: "Depth without Door (in.):27.56". Maker website figure.
kenmore.com product page https://www.kenmore.com/products/kenmore-62312-18-2-cu-ft-top-freezer-refrigerator-8211-white/ lists: "Depth without Door (in.):27.56". Maker website figure.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Kenmore measurement source — kenmore-use-care-61332_manual.pdf i.sears.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-11-14
Official Kenmore structured product specification. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231#, EXTERNAL DIMENSIONS; installation p10. p8 prints "BACKGROUND" "30.75 in" in the external-dimensions depth row for this family; p14 closed-door drawings show recessed grips without projecting handles. The same printed external depth applies with and without handles. AGREE with equal depth values for these recessed-handle models; direct printed eviden Source set to the local file Codex read: kenmore-use-care-61332_manual.pdf p8 (the number is in its page text; was 62312.html pNone) (D-2026-11-14-kenmore-codex-fixes).
Official Kenmore structured product specification. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231#, EXTERNAL DIMENSIONS; installation p10. p8 prints "BACKGROUND" "30.75 in" in the external-dimensions depth row for this family; p14 closed-door drawings show recessed grips without projecting handles. The same printed external depth applies with and without handles. AGREE with equal depth values for these recessed-handle models; direct printed eviden Source set to the local file Codex read: kenmore-use-care-61332_manual.pdf p8 (the number is in its page text; was 62312.html pNone) (D-2026-11-14-kenmore-codex-fixes).
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Kenmore measurement source — kenmore-use-care-61332_manual.pdf i.sears.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-11-14
Official Kenmore structured product specification. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231#, EXTERNAL DIMENSIONS; installation p10. p8 prints "BACKGROUND" "30.75 in" in the external-dimensions depth row for this family; p14 closed-door drawings show recessed grips without projecting handles. The same printed external depth applies with and without handles. AGREE with equal depth values for these recessed-handle models; direct printed eviden Source set to the local file Codex read: kenmore-use-care-61332_manual.pdf p8 (the number is in its page text; was 62312.html pNone) (D-2026-11-14-kenmore-codex-fixes).
Official Kenmore structured product specification. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231#, EXTERNAL DIMENSIONS; installation p10. p8 prints "BACKGROUND" "30.75 in" in the external-dimensions depth row for this family; p14 closed-door drawings show recessed grips without projecting handles. The same printed external depth applies with and without handles. AGREE with equal depth values for these recessed-handle models; direct printed eviden Source set to the local file Codex read: kenmore-use-care-61332_manual.pdf p8 (the number is in its page text; was 62312.html pNone) (D-2026-11-14-kenmore-codex-fixes).
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Retained specification excerpt: Official Kenmore structured product specification.
Value used by ExactFit
61.28 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Kenmore measurement source — 62312.html Kenmore · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Official Kenmore structured product specification. Reviewed: 2026-09-04
Official Kenmore structured product specification.
35.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: 29.5 + 2 x 3 = 35.5
Confidence label: high.
Primary evidence
Kenmore measurement source — 101719970.pdf assets.skulytics.io · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 10 Reviewed: 2026-11-14
Calculated, not printed: 29.5 + 2 x 3 = 35.5 in. Recomputed 2026-11-02 after its printed inputs were corrected. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231# WIDTH + 2 x 101719970.pdf p10 side gap: 29.5 + 2 x 3 = 35.5. AGREE: allowed opening calculation, exact printed inputs.
Calculated, not printed: 29.5 + 2 x 3 = 35.5 in. Recomputed 2026-11-02 after its printed inputs were corrected. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231# WIDTH + 2 x 101719970.pdf p10 side gap: 29.5 + 2 x 3 = 35.5. AGREE: allowed opening calculation, exact printed inputs. Calculation or inference: 29.5 + 2 x 3 = 35.5.
Other evidence found
36 in — superseded
dzrf1tezfwb3j.cloudfront.net; location not retained. Model scope: not separately recorded. Raw value: as an oven or radiator. ■ ■Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm). However, if the product is placed aga. The final reviewed registry supersedes this earlier audit value.
The same document as the value used above; page 10. Model scope: not separately recorded. Raw value: Exact width plus the manual's required clearance on both sides.. The final reviewed registry supersedes this earlier audit value.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Kenmore measurement source — 101719970.pdf assets.skulytics.io · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 10 Reviewed: 2026-11-14
Minimum opening height is the verified highest appliance endpoint plus the documented top clearance. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231# overall height + 101719970.pdf p10 top gap: 66.38 + 3 = 69.38. AGREE: exact allowed opening calculation; unprinted case height is unnecessary to this sum.
Minimum opening height is the verified highest appliance endpoint plus the documented top clearance. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231# overall height + 101719970.pdf p10 top gap: 66.38 + 3 = 69.38. AGREE: exact allowed opening calculation; unprinted case height is unnecessary to this sum. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Opening = size + printed gap: 27.56 + 3 = 30.56 (depth_case_only_in from the maker's own website or
Value used by ExactFit
30.56 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: 27.56 + 3 = 30.56
Confidence label: high.
Primary evidence
Kenmore measurement source — https://www.kenmore.com/products/kenmore-62312-18-2-cu-ft-top-freezer-refrigerator-8211-white/ assets.skulytics.io · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Opening = size + printed gap: 27.56 + 3 = 30.56 (depth_case_only_in from the maker's own website or Reviewed: 2026-11-15
Opening = size + printed gap: 27.56 + 3 = 30.56 (depth_case_only_in from the maker's own website or its printed manual, rear_clearance_in printed). Tag of 2026-11-14 ("built on Kenmore website figures") lifted 2026-11-15: the maker website counts (D-2026-11-15-maker-website-sizes). Previous note: Minimum opening depth is the verified cabinet depth plus the documented rear clearance.
Opening = size + printed gap: 27.56 + 3 = 30.56 (depth_case_only_in from the maker's own website or its printed manual, rear_clearance_in printed). Tag of 2026-11-14 ("built on Kenmore website figures") lifted 2026-11-15: the maker website counts (D-2026-11-15-maker-website-sizes). Previous note: Minimum opening depth is the verified cabinet depth plus the documented rear clearance. Calculation or inference: 27.56 + 3 = 30.56.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Kenmore measurement source — 101719970.pdf assets.skulytics.io · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 10 Reviewed: 2026-11-14
101719970.pdf p10 (https://assets.skulytics.io/assets/docs/A121014936-101719970.) printed: "To ensure proper ventilation for your refrigerator, allow for 3" (7.6 cm) of space on each side and at the top. Allow for 3" (7.6 cm) of space behind the refrigerator." Read on the page image 2026-11-02. The manual cover names models 899.6231#, 899.7231#, 899.6133#, 899.7133# (# = colour number), which covers this model. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): 101719970.pdf p10: "3? (7.6 cm) of space on each side and at the top." AGREE: unusually large but explicitly printed.
101719970.pdf p10 (https://assets.skulytics.io/assets/docs/A121014936-101719970.) printed: "To ensure proper ventilation for your refrigerator, allow for 3" (7.6 cm) of space on each side and at the top. Allow for 3" (7.6 cm) of space behind the refrigerator." Read on the page image 2026-11-02. The manual cover names models 899.6231#, 899.7231#, 899.6133#, 899.7133# (# = colour number), which covers this model. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): 101719970.pdf p10: "3? (7.6 cm) of space on each side and at the top." AGREE: unusually large but explicitly printed.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Kenmore measurement source — 101719970.pdf assets.skulytics.io · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 10 Reviewed: 2026-11-14
101719970.pdf p10 (https://assets.skulytics.io/assets/docs/A121014936-101719970.) printed: "To ensure proper ventilation for your refrigerator, allow for 3" (7.6 cm) of space on each side and at the top. Allow for 3" (7.6 cm) of space behind the refrigerator." Read on the page image 2026-11-02. The manual cover names models 899.6231#, 899.7231#, 899.6133#, 899.7133# (# = colour number), which covers this model. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): 101719970.pdf p10: "3? (7.6 cm) of space on each side and at the top." AGREE: unusually large but explicitly printed.
101719970.pdf p10 (https://assets.skulytics.io/assets/docs/A121014936-101719970.) printed: "To ensure proper ventilation for your refrigerator, allow for 3" (7.6 cm) of space on each side and at the top. Allow for 3" (7.6 cm) of space behind the refrigerator." Read on the page image 2026-11-02. The manual cover names models 899.6231#, 899.7231#, 899.6133#, 899.7133# (# = colour number), which covers this model. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): 101719970.pdf p10: "3? (7.6 cm) of space on each side and at the top." AGREE: unusually large but explicitly printed.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Kenmore measurement source — 101719970.pdf assets.skulytics.io · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 10 Reviewed: 2026-11-14
101719970.pdf p10 (https://assets.skulytics.io/assets/docs/A121014936-101719970.) printed: "To ensure proper ventilation for your refrigerator, allow for 3" (7.6 cm) of space on each side and at the top. Allow for 3" (7.6 cm) of space behind the refrigerator." Read on the page image 2026-11-02. The manual cover names models 899.6231#, 899.7231#, 899.6133#, 899.7133# (# = colour number), which covers this model. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): 101719970.pdf p10: "3? (7.6 cm) of space on each side and at the top." AGREE: unusually large but explicitly printed.
101719970.pdf p10 (https://assets.skulytics.io/assets/docs/A121014936-101719970.) printed: "To ensure proper ventilation for your refrigerator, allow for 3" (7.6 cm) of space on each side and at the top. Allow for 3" (7.6 cm) of space behind the refrigerator." Read on the page image 2026-11-02. The manual cover names models 899.6231#, 899.7231#, 899.6133#, 899.7133# (# = colour number), which covers this model. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): 101719970.pdf p10: "3? (7.6 cm) of space on each side and at the top." AGREE: unusually large but explicitly printed.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Kenmore measurement source — 101719970.pdf assets.skulytics.io · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 10 Reviewed: 2026-11-14
101719970.pdf p10 (https://assets.skulytics.io/assets/docs/A121014936-101719970.) printed: "To ensure proper ventilation for your refrigerator, allow for 3" (7.6 cm) of space on each side and at the top. Allow for 3" (7.6 cm) of space behind the refrigerator." Read on the page image 2026-11-02. The manual cover names models 899.6231#, 899.7231#, 899.6133#, 899.7133# (# = colour number), which covers this model. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): 101719970.pdf p10: "3? (7.6 cm) of space behind the refrigerator." AGREE: unusually large but explicitly printed.
101719970.pdf p10 (https://assets.skulytics.io/assets/docs/A121014936-101719970.) printed: "To ensure proper ventilation for your refrigerator, allow for 3" (7.6 cm) of space on each side and at the top. Allow for 3" (7.6 cm) of space behind the refrigerator." Read on the page image 2026-11-02. The manual cover names models 899.6231#, 899.7231#, 899.6133#, 899.7133# (# = colour number), which covers this model. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): 101719970.pdf p10: "3? (7.6 cm) of space behind the refrigerator." AGREE: unusually large but explicitly printed.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Kenmore measurement source — prod_27603925312 i.sears.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 10 Reviewed: 2026-11-14
When installing your refrigerator next to a fixed wall, leave a 3” (7.6 cm) minimum space on the hinge side (some models require more) to allow the door to swing open. (door angle not stated). Source covers: The exact Kenmore 46-62312 product page links this Use & Care Guide; the guide’s model table lists family 899.6231# (the final digit is the color number).. Checked on the rendered page. Found by the Hermes second pass 2026-10-25. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): 101719970.pdf p10: "minimum space on the hinge side (some models require more) to allow the door to swing open." Printed gap 3 inches. Rule 8 accepts this without a stated angle; no larger dimensioned 90-degree reach appears on this installation drawing.
When installing your refrigerator next to a fixed wall, leave a 3” (7.6 cm) minimum space on the hinge side (some models require more) to allow the door to swing open. (door angle not stated). Source covers: The exact Kenmore 46-62312 product page links this Use & Care Guide; the guide’s model table lists family 899.6231# (the final digit is the color number).. Checked on the rendered page. Found by the Hermes second pass 2026-10-25. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): 101719970.pdf p10: "minimum space on the hinge side (some models require more) to allow the door to swing open." Printed gap 3 inches. Rule 8 accepts this without a stated angle; no larger dimensioned 90-degree reach appears on this installation drawing.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Source not recorded Publisher not recorded · Retained document Model scope: Not established Publication/revision date: Not recorded Location: Exact location not retained Reviewed: Not recorded
No retained excerpt is available.
The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.
Why this value was used
No evidence decision recorded.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Kenmore measurement source — 62312.html Publisher not recorded
Retained specification excerpt: Not an allowed calculation: built on Kenmore website figures (or copied from them), not printed in t
Value used by ExactFit
29.53 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: case width = exact closed-door width
Confidence label: medium.
Primary evidence
Kenmore measurement source — 62312.html Publisher not recorded · Retained document Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Not an allowed calculation: built on Kenmore website figures (or copied from them), not printed in t Reviewed: 2026-11-14
Not an allowed calculation: built on Kenmore website figures (or copied from them), not printed in the maker documents (Codex check 2026-11-14 FAIL). Kept as history, not used (Kenmore Codex check 2026-11-14, D-2026-11-14-kenmore-codex-fixes). Previous note: No side projections; standardized case width to official closed-door width.
The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.
Why this value was used
Kept as history; not a printed value or an allowed calculation from printed values, so not used.
Other evidence found
54 in — superseded
dzrf1tezfwb3j.cloudfront.net; location not retained. Model scope: not separately recorded. Raw value: pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet opening width of 54" (137 .16 cm) is recommended. [...] To ensure prop. The final reviewed registry supersedes this earlier audit value.
Selected: 29.5 in. Earlier retained values: 29.53 in, 29.53 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Own Kenmore Use & Care Guide kenmore-use-care-61332_manual.pdf p8 (https://i.sears.com/s/d/pdf/mp-tc/10672550/prod_27603924512), SPECIFICATIONS table, column 899.6231#, EXTERNAL DIMENSIONS row "WIDTH": "29.5 in". Read on the page image 2026-11-02. (Was 29.53 from the kenmore.com product page; the printed figure replaces it.) Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231#: "WIDTH" "29.5 in". AGREE: use the model-family printed width instead of website precision.
Selected: 35.5 in. Earlier retained values: 36 in, 35.53 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Calculated, not printed: 29.5 + 2 x 3 = 35.5 in. Recomputed 2026-11-02 after its printed inputs were corrected. Read on the page image by the Codex check 2026-11-14 (codex-work/kenmore-accuracy, models-01: PASS; owner 2026-11-09 "Yes, record them", D-2026-11-09-codex-pass-reading): kenmore-use-care-61332_manual.pdf p8, 899.6231# WIDTH + 2 x 101719970.pdf p10 side gap: 29.5 + 2 x 3 = 35.5. AGREE: allowed opening calculation, exact printed inputs. Calculation or inference: 29.5 + 2 x 3 = 35.5.
Evidence reflects the sources reviewed on 2026-11-15. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.