Measurement evidence for Kenmore 46-61355

Value used by ExactFit

29.72 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 896.6135# color suffix

Confidence label: medium.

Primary evidence

Kenmore measurement source — new202.html
Kenmore · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free finish/model variant of the documented Kenmore chassis.
Reviewed: 2026-09-04

Conflict-free finish/model variant of the documented Kenmore chassis.

Why this value was used

Conflict-free finish/model variant of the documented Kenmore chassis. Calculation or inference: 896.6135# color suffix.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.35 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 896.6135# color suffix

Confidence label: medium.

Primary evidence

Kenmore measurement source — new202.html
Kenmore · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free finish/model variant of the documented Kenmore chassis.
Reviewed: 2026-09-04

Conflict-free finish/model variant of the documented Kenmore chassis.

Why this value was used

Conflict-free finish/model variant of the documented Kenmore chassis. Calculation or inference: 896.6135# color suffix.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.78 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 896.6135# color suffix

Confidence label: medium.

Primary evidence

Kenmore measurement source — new202.html
Kenmore · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free finish/model variant of the documented Kenmore chassis.
Reviewed: 2026-09-04

Conflict-free finish/model variant of the documented Kenmore chassis.

Why this value was used

Conflict-free finish/model variant of the documented Kenmore chassis. Calculation or inference: 896.6135# color suffix.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.35 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 896.6135# color suffix

Confidence label: medium.

Primary evidence

Kenmore measurement source — new202.html
Kenmore · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free finish/model variant of the documented Kenmore chassis.
Reviewed: 2026-09-04

Conflict-free finish/model variant of the documented Kenmore chassis.

Why this value was used

Conflict-free finish/model variant of the documented Kenmore chassis. Calculation or inference: 896.6135# color suffix.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.69 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 896.6135# color suffix

Confidence label: medium.

Primary evidence

Kenmore measurement source — new202.html
Kenmore · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free finish/model variant of the documented Kenmore chassis.
Reviewed: 2026-09-04

Conflict-free finish/model variant of the documented Kenmore chassis.

Why this value was used

Conflict-free finish/model variant of the documented Kenmore chassis. Calculation or inference: 896.6135# color suffix.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

31.69 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 896.6135# color suffix

Confidence label: medium.

Primary evidence

Kenmore measurement source — new202.html
Kenmore · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free finish/model variant of the documented Kenmore chassis.
Reviewed: 2026-09-04

Conflict-free finish/model variant of the documented Kenmore chassis.

Why this value was used

Conflict-free finish/model variant of the documented Kenmore chassis. Calculation or inference: 896.6135# color suffix.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

62.41 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 31.69 + 29.72 + 1.0 predecessor door-envelope allowance

Confidence label: medium.

Primary evidence

Kenmore measurement source — new202.html
Kenmore · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official payload contains zero; inferred from the exact predecessor Kenmore 30-in top-freezer door-e
Reviewed: 2026-09-04

Official payload contains zero; inferred from the exact predecessor Kenmore 30-in top-freezer door-envelope pattern.

Why this value was used

Official payload contains zero; inferred from the exact predecessor Kenmore 30-in top-freezer door-envelope pattern. Calculation or inference: 31.69 + 29.72 + 1.0 predecessor door-envelope allowance.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.12 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 29.72 + 2 * 3.2

Confidence label: medium.

Primary evidence

Kenmore measurement source — 103744792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 11
Reviewed: 2026-09-04

Exact width plus the manual's required clearance on both sides.

Why this value was used

Exact width plus the manual's required clearance on both sides. Calculation or inference: 29.72 + 2 * 3.2.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

71.98 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Kenmore measurement source — 103744792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 11
Reviewed: 2026-09-05

Minimum opening height is the verified highest appliance endpoint plus the documented top clearance.

Why this value was used

Minimum opening height is the verified highest appliance endpoint plus the documented top clearance. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.55 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Kenmore measurement source — 103744792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 11
Reviewed: 2026-09-05

Minimum opening depth is the verified cabinet depth plus the documented rear clearance.

Why this value was used

Minimum opening depth is the verified cabinet depth plus the documented rear clearance. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: Endpoint migration from reviewed side_clearance_wall_in; evidence explicitly states each/both sides

Confidence label: high.

Primary evidence

Kenmore measurement source — 103744792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 11
Reviewed: 2026-09-05

Stored reviewed evidence explicitly applies the clearance to each/both sides. Manual requires 3.2 in on each side and on the hinge side at a fixed wall.

Why this value was used

Stored reviewed evidence explicitly applies the clearance to each/both sides. Manual requires 3.2 in on each side and on the hinge side at a fixed wall.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: Endpoint migration from reviewed side_clearance_wall_in; evidence explicitly states each/both sides

Confidence label: high.

Primary evidence

Kenmore measurement source — 103744792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 11
Reviewed: 2026-09-05

Stored reviewed evidence explicitly applies the clearance to each/both sides. Manual requires 3.2 in on each side and on the hinge side at a fixed wall.

Why this value was used

Stored reviewed evidence explicitly applies the clearance to each/both sides. Manual requires 3.2 in on each side and on the hinge side at a fixed wall.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Kenmore measurement source — 103744792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 11
Reviewed: 2026-09-05

Manufacturer family manual specifies 3.2 in installation clearance on all surrounding sides.

Why this value was used

Manufacturer family manual specifies 3.2 in installation clearance on all surrounding sides. Calculation or inference: cached documented shared chassis propagation.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Kenmore measurement source — 103744792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 11
Reviewed: 2026-09-05

Manufacturer family manual specifies 3.2 in installation clearance on all surrounding sides.

Why this value was used

Manufacturer family manual specifies 3.2 in installation clearance on all surrounding sides. Calculation or inference: cached documented shared chassis propagation.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Kenmore measurement source — prod_27972768812
i.sears.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 11
Reviewed: 2026-10-25

When installing your refrigerator next to a fixed wall, leave a 3.2” (8.13 cm) minimum space on the hinge side (some models require more) to allow the door to swing open. (door angle not stated). Source covers: The exact Kenmore 46-61355 product page links this Use & Care Guide; its cover lists Top Mount Refrigerator model family 896.6135#, with ‘# color number’.. Checked on the rendered page. Found by the Hermes second pass 2026-10-25.

Why this value was used

When installing your refrigerator next to a fixed wall, leave a 3.2” (8.13 cm) minimum space on the hinge side (some models require more) to allow the door to swing open. (door angle not stated). Source covers: The exact Kenmore 46-61355 product page links this Use & Care Guide; its cover lists Top Mount Refrigerator model family 896.6135#, with ‘# color number’.. Checked on the rendered page. Found by the Hermes second pass 2026-10-25.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29.72 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case width = exact closed-door width

Confidence label: medium.

Primary evidence

Kenmore measurement source — new202.html
Kenmore · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: No side projections; standardized case width to official closed-door width.
Reviewed: 2026-09-04

No side projections; standardized case width to official closed-door width.

Why this value was used

No side projections; standardized case width to official closed-door width. Calculation or inference: case width = exact closed-door width.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.