Measurement evidence for Haier QHE16HYPFS

Value used by ExactFit

32.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

• 32.75 in — superseded

  Document 104330675.pdf; page 1. Model scope: not separately recorded. Raw value: Width 32 3/4. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

• 70.6875 in — superseded

  Document 104330675.pdf (p.1); page 1. Model scope: not separately recorded. Raw value: Height to Top of Case (in.) B -> 70-11/16. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

71 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

22.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

• 22.5 in — superseded

  Document 104330675.pdf (p.1); page 1. Model scope: not separately recorded. Raw value: Case Depth Without Door (in.) C -> 22-1/2. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

26.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

40.5 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

• 39.875 in — superseded

  Document 104330675.pdf (p.1); page 1. Model scope: not separately recorded. Raw value: Depth With Door Open 90 Degrees (in.) E -> 39-7/8. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 32.875 + 2 * 1

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: QHE16HY opening width uses the exact current Haier closed envelope 32.875 in plus the exact Haier si
Reviewed: 2026-09-04

QHE16HY opening width uses the exact current Haier closed envelope 32.875 in plus the exact Haier side air clearance 1 in on both sides: 32.875 + 2 * 1 = 34.875 in.

Why this value was used

QHE16HY opening width uses the exact current Haier closed envelope 32.875 in plus the exact Haier side air clearance 1 in on both sides: 32.875 + 2 * 1 = 34.875 in. Calculation or inference: 32.875 + 2 * 1.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

72 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(70.5, 71) + 1

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: QHE16HY opening height uses the tallest exact appliance endpoint 71 in plus exact top air clearance
Reviewed: 2026-09-05

QHE16HY opening height uses the tallest exact appliance endpoint 71 in plus exact top air clearance 1 in: 72 in.

Why this value was used

QHE16HY opening height uses the tallest exact appliance endpoint 71 in plus exact top air clearance 1 in: 72 in. Calculation or inference: max(70.5, 71) + 1.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 22.75 + 2

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: QHE16HY opening depth uses exact case-only depth 22.75 in plus exact rear air clearance 2 in: 22.75
Reviewed: 2026-09-05

QHE16HY opening depth uses exact case-only depth 22.75 in plus exact rear air clearance 2 in: 22.75 + 2 = 24.75 in.

Why this value was used

QHE16HY opening depth uses exact case-only depth 22.75 in plus exact rear air clearance 2 in: 22.75 + 2 = 24.75 in. Calculation or inference: 22.75 + 2.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier specification publishes Side Air Clearances = 1 in. This supersedes the re
Reviewed: 2026-09-05

Current exact-model Haier specification publishes Side Air Clearances = 1 in. This supersedes the retained older Rev. 0 sheet/manual that printed 0 in.

Why this value was used

Current exact-model Haier specification publishes Side Air Clearances = 1 in. This supersedes the retained older Rev. 0 sheet/manual that printed 0 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier specification publishes Side Air Clearances = 1 in. This supersedes the re
Reviewed: 2026-09-05

Current exact-model Haier specification publishes Side Air Clearances = 1 in. This supersedes the retained older Rev. 0 sheet/manual that printed 0 in.

Why this value was used

Current exact-model Haier specification publishes Side Air Clearances = 1 in. This supersedes the retained older Rev. 0 sheet/manual that printed 0 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — 104330675.pdf
assets.skulytics.io · Specification sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Exact-model manufacturer technical sheet specifies Top Air Clearance 1 in.

Why this value was used

Exact-model manufacturer technical sheet specifies Top Air Clearance 1 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — 104330675.pdf
assets.skulytics.io · Specification sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Exact-model manufacturer technical sheet specifies Back Air Clearance 2 in.

Why this value was used

Exact-model manufacturer technical sheet specifies Back Air Clearance 2 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.4375 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: (35.75 - 32.875) / 2

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Migrated from hinge_side_wall_clearance_in (90 degrees). Symmetric multi-door family: current exact
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (90 degrees). Symmetric multi-door family: current exact Haier width open 90 degrees is 35.75 in and closed width is 32.875 in; exact per-side operating envelope is (35.75 - 32.875) / 2 = 1.4375 in.

Why this value was used

Migrated from hinge_side_wall_clearance_in (90 degrees). Symmetric multi-door family: current exact Haier width open 90 degrees is 35.75 in and closed width is 32.875 in; exact per-side operating envelope is (35.75 - 32.875) / 2 = 1.4375 in. Calculation or inference: (35.75 - 32.875) / 2.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.875 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in = width_doors_closed_in

Confidence label: high.

Calculation inputs: Overall width;

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-16-8-Cu-Ft-Quad-Door-Refrigerator-QHE16HYPFS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: QHE16HY dimensional drawing spans the cabinet at the published overall width; current exact-model of
Reviewed: 2026-09-04

QHE16HY dimensional drawing spans the cabinet at the published overall width; current exact-model official closed width is 32.875 in, so case width is 32.875 in.

Why this value was used

QHE16HY dimensional drawing spans the cabinet at the published overall width; current exact-model official closed width is 32.875 in, so case width is 32.875 in. Calculation or inference: case_width_in = width_doors_closed_in.

Other evidence found

• 32.75 in — superseded

  Document 104330675.pdf; page 1. Model scope: not separately recorded. Raw value: Width 32 3/4. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.