Measurement evidence for Haier HRB15N3BGS

Value used by ExactFit

27.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-15-Cu-Ft-Bottom-Freezer-Refrigerator-HRB15N3BGS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

• 52.8 in — superseded

  Document 105166709.pdf; page 2. Model scope: not separately recorded. Raw value: Width (in.) G -> 52-4/5. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

67.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-15-Cu-Ft-Bottom-Freezer-Refrigerator-HRB15N3BGS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

67.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-15-Cu-Ft-Bottom-Freezer-Refrigerator-HRB15N3BGS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-15-Cu-Ft-Bottom-Freezer-Refrigerator-HRB15N3BGS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

• 23.625 in — superseded

  Document 105166709.pdf; page 2. Model scope: not separately recorded. Raw value: Case depth without door (in.) D -> 23-5/8. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-15-Cu-Ft-Bottom-Freezer-Refrigerator-HRB15N3BGS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

26.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-15-Cu-Ft-Bottom-Freezer-Refrigerator-HRB15N3BGS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

52 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-15-Cu-Ft-Bottom-Freezer-Refrigerator-HRB15N3BGS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Current exact-model Haier official weights and dimensions specification.
Reviewed: 2026-09-04

Current exact-model Haier official weights and dimensions specification.

Why this value was used

Current exact-model Haier official weights and dimensions specification.

Other evidence found

• 26.75 in — superseded

  Document 105166709.pdf; page 2. Model scope: not separately recorded. Raw value: Depth with fresh food door open 90˚ (in.) F -> 26-3/4. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 27.625 + 2 * 1

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-15-Cu-Ft-Bottom-Freezer-Refrigerator-HRB15N3BGS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: HRB15N3 opening width uses the exact current Haier closed envelope 27.625 in plus the exact Haier si
Reviewed: 2026-09-04

HRB15N3 opening width uses the exact current Haier closed envelope 27.625 in plus the exact Haier side air clearance 1 in on both sides: 27.625 + 2 * 1 = 29.625 in.

Why this value was used

HRB15N3 opening width uses the exact current Haier closed envelope 27.625 in plus the exact Haier side air clearance 1 in on both sides: 27.625 + 2 * 1 = 29.625 in. Calculation or inference: 27.625 + 2 * 1.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(67.875, 67.875) + 1

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-15-Cu-Ft-Bottom-Freezer-Refrigerator-HRB15N3BGS
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: HRB15N3 opening height uses the tallest exact appliance endpoint 67.875 in plus exact top air cleara
Reviewed: 2026-09-05

HRB15N3 opening height uses the tallest exact appliance endpoint 67.875 in plus exact top air clearance 1 in: 68.875 in.

Why this value was used

HRB15N3 opening height uses the tallest exact appliance endpoint 67.875 in plus exact top air clearance 1 in: 68.875 in. Calculation or inference: max(67.875, 67.875) + 1.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 24 + 2

Confidence label: high.

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-15-Cu-Ft-Bottom-Freezer-Refrigerator-HRB15N3BGS
www.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: HRB15N3 opening depth uses exact case-only depth 24 in plus exact rear air clearance 2 in: 24 + 2 =
Reviewed: 2026-09-05

HRB15N3 opening depth uses exact case-only depth 24 in plus exact rear air clearance 2 in: 24 + 2 = 26 in.

Why this value was used

HRB15N3 opening depth uses exact case-only depth 24 in plus exact rear air clearance 2 in: 24 + 2 = 26 in. Calculation or inference: 24 + 2.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — 105166707.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

2.54 cm) of space on each side

Why this value was used

2.54 cm) of space on each side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — 105166707.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

2.54 cm) of space on each side

Why this value was used

2.54 cm) of space on each side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — 105166707.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

2.54 cm) of space on each side and at the top

Why this value was used

2.54 cm) of space on each side and at the top

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Haier measurement source — HRB15N3BGS-105166707.pdf
www.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Exact Haier installation guide visually states 2 in of space behind the refrigerator.

Why this value was used

Exact Haier installation guide visually states 2 in of space behind the refrigerator.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

4 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

Haier measurement source — 105166707.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave 4” (10 cm

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave 4” (10 cm

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

27.625 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in = width_doors_closed_in

Confidence label: high.

Calculation inputs: Overall width;

Primary evidence

Haier measurement source — Haier-ENERGY-STAR-15-Cu-Ft-Bottom-Freezer-Refrigerator-HRB15N3BGS
Haier · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: HRB15N3 dimensional drawing spans the cabinet at the published overall width; current exact-model of
Reviewed: 2026-09-04

HRB15N3 dimensional drawing spans the cabinet at the published overall width; current exact-model official closed width is 27.625 in, so case width is 27.625 in.

Why this value was used

HRB15N3 dimensional drawing spans the cabinet at the published overall width; current exact-model official closed width is 27.625 in, so case width is 27.625 in. Calculation or inference: case_width_in = width_doors_closed_in.

Other evidence found

• 52.8 in — superseded

  Document 105166709.pdf; page 2. Model scope: not separately recorded. Raw value: Width (in.) G -> 52-4/5. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.