This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)
Last reviewed: 2026-09-05. 4 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | 35.75 in | ✓ Verified — exact model | GE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances GE | Retained specification excerpt: Overall Width = 35.75 in | value\":\"69.94 in\"},{\"id\":\"13973095\",\"name\":\"Spec_WEIGHTS & DIME | |
Value used by ExactFit35.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances Overall Width = 35.75 in | value\":\"69.94 in\"},{\"id\":\"13973095\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Overall Width\",\"value\":\"35.75 in\"},{\"id\":\"13973096\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Side Air ClearanceOpen original source ↗ Why this value was usedOverall Width = 35.75 in | value\":\"69.94 in\"},{\"id\":\"13973095\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Overall Width\",\"value\":\"35.75 in\"},{\"id\":\"13973096\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Side Air Clearance Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | 68.9375 in | ✓ Secondary source only | GE GZS24PYYFS Installation Instructions assets.skulytics.io | Page 8 | |
Value used by ExactFit68.9375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GZS24PYYFS Installation Instructions Height to top of case (B) -> 68-15/16Open original source ↗ Why this value was usedHeight to top of case (B) -> 68-15/16 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 69.9375 in | ✓ Secondary source only | GE GZS24PYYFS Installation Instructions assets.skulytics.io | Page 8 | |
Value used by ExactFit69.9375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GZS24PYYFS Installation Instructions Height to top of hinge and door (A) -> 69-15/16Open original source ↗ Why this value was usedHeight to top of hinge and door (A) -> 69-15/16 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | 25.0625 in | ✓ Secondary source only | GE GZS24PYYFS Installation Instructions assets.skulytics.io | Page 8 | |
Value used by ExactFit25.0625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GZS24PYYFS Installation Instructions Case depth without doors, without handles (C) -> 25-1/16Open original source ↗ Why this value was usedCase depth without doors, without handles (C) -> 25-1/16 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 29.63 in | ✓ Verified — exact model | GE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances GE | Retained specification excerpt: Depth Without Handle\",\"value\":\"29.63 in | |
Value used by ExactFit29.63 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances Depth Without Handle\",\"value\":\"29.63 inOpen original source ↗ Why this value was usedDepth Without Handle\",\"value\":\"29.63 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 31.63 in | ✓ Verified — exact model | GE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances GE | Retained specification excerpt: Overall Depth with Handle\",\"value\":\"31.63 in | |
Value used by ExactFit31.63 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances Overall Depth with Handle\",\"value\":\"31.63 inOpen original source ↗ Why this value was usedOverall Depth with Handle\",\"value\":\"31.63 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 46.875 in | ✓ Secondary source only | GE GZS24PYYFS Installation Instructions assets.skulytics.io | Page 8 | |
Value used by ExactFit46.875 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GZS24PYYFS Installation Instructions Total depth with fresh food door open 90° (I) -> 46-7/8Open original source ↗ Why this value was usedTotal depth with fresh food door open 90° (I) -> 46-7/8 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | Unknown | ? Not found · Calculated/inferred | GE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances GE | Retained specification excerpt: Official Overall Width and Side Air Clearances; max(case_width_in,width_doors_closed_in) + 2 * side_ | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(case_width_in,width_doors_closed_in) + 2 * side_clearance_wall_in = 36.0 Confidence label: high. Calculation inputs: Cabinet case width; Overall width; Adjoining-wall clearance (reviewed endpoint); Primary evidenceGE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances Official Overall Width and Side Air Clearances; max(case_width_in,width_doors_closed_in) + 2 * side_clearance_wall_in = 36.0 inOpen original source ↗ Why this value was usedA required calculation input lacks defensible evidence. Retained research value: 36 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | 70.9375 in | ✓ Secondary source only · Calculated/inferred | GE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances GE | Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 69.9375 in plus documented top cleara | |
Value used by ExactFit70.9375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidenceGE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances Minimum opening height derived from highest appliance endpoint 69.9375 in plus documented top clearance 1.0 in.Open original source ↗ Why this value was usedMinimum opening height derived from highest appliance endpoint 69.9375 in plus documented top clearance 1.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | 27.0625 in | ✓ Secondary source only · Calculated/inferred | GE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances GE | Retained specification excerpt: Minimum opening depth derived from case-only depth 25.0625 in plus documented rear clearance 2.0 in. | |
Value used by ExactFit27.0625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidenceGE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances Minimum opening depth derived from case-only depth 25.0625 in plus documented rear clearance 2.0 in.Open original source ↗ Why this value was usedMinimum opening depth derived from case-only depth 25.0625 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | 0.125 in | ✓ Verified — exact model | GE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances GE | Retained specification excerpt: Side Air Clearances\",\"value\":\"1/8 in | |
Value used by ExactFit0.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances Side Air Clearances\",\"value\":\"1/8 inOpen original source ↗ Why this value was usedSide Air Clearances\",\"value\":\"1/8 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | 0.125 in | ✓ Verified — exact model | GE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances GE | Retained specification excerpt: Side Air Clearances\",\"value\":\"1/8 in | |
Value used by ExactFit0.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances Side Air Clearances\",\"value\":\"1/8 inOpen original source ↗ Why this value was usedSide Air Clearances\",\"value\":\"1/8 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | 1 in | ✓ Verified — exact model | GE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances GE | Retained specification excerpt: Top Air Clearances\",\"value\":\"1 in | |
Value used by ExactFit1 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances Top Air Clearances\",\"value\":\"1 inOpen original source ↗ Why this value was usedTop Air Clearances\",\"value\":\"1 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | 2 in | ✓ Verified — exact model | GE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances GE | Retained specification excerpt: Back Air Clearances\",\"value\":\"2 in | |
Value used by ExactFit2 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances Back Air Clearances\",\"value\":\"2 inOpen original source ↗ Why this value was usedBack Air Clearances\",\"value\":\"2 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Hinge-side wall clearance | 3.75 in | ✓ Secondary source only | GE GZS24PYYFS Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit3.75 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: max(freezer-side 90deg wall clearance, fresh-food-side 90deg wall clearance) Confidence label: high. Primary evidenceGE GZS24PYYFS Quick Specs Exact-model GE table lists 90-degree adjacent-wall clearance for freezer side 3 11/16 in and fresh-food side 3 3/4 in; conservative either-side requirement is 3 3/4 in.Open original source ↗ Why this value was usedExact-model GE table lists 90-degree adjacent-wall clearance for freezer side 3 11/16 in and fresh-food side 3 3/4 in; conservative either-side requirement is 3 3/4 in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | Unknown | ? Not found · Calculated/inferred | GE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator ... www.charlotteappliance.com | Retained specification excerpt: Low-confidence same-appliance width mapping: case_width_in=35.75 in from width_doors_closed_in. | |
Value used by ExactFitUnknown · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: case_width_in mapped from populated width_doors_closed_in; doors do not materially change closed product width Confidence label: low. Primary evidenceGE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator ... Low-confidence same-appliance width mapping: case_width_in=35.75 in from width_doors_closed_in.Open original source ↗ Why this value was usedA low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 35.75 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Adjoining-wall clearance (reviewed endpoint) | 0.125 in | ✓ Verified — exact model | GE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances GE | Retained specification excerpt: Side Air Clearances\",\"value\":\"1/8 in | |
Value used by ExactFit0.125 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE® 23.5 Cu. Ft. Counter-Depth Side-By-Side Refrigerator with LED Light Walls and Extra Tall Dispenser - GZS24PYYFS - GE Appliances Side Air Clearances\",\"value\":\"1/8 inOpen original source ↗ Why this value was usedSide Air Clearances\",\"value\":\"1/8 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Not found for safe fit use. Sources retained: https://www.geappliances.com/appliance/GE-23-5-Cu-Ft-Counter-Depth-Side-By-Side-Refrigerator-with-LED-Light-Walls-and-Extra-Tall-Dispenser-GZS24PYYFS. Related-model record: GZS24PYYFS.
A required calculation input lacks defensible evidence.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: https://www.charlotteappliance.com/GE-GZS24PYYFS-GE-23-5-Cu-Ft-Counter-Depth-Side-By-Side-Refrigerator-with-LED-Light-Walls-and-Extra-Tall-Dispenser. Related-model record: GZS24PYYFS.
A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
GE · Web source · exact model/source
Model numbers covered: GZS24PYYFS. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
11 displayed measurements supported: Overall width; Depth with door, without handles; Depth with handle; Minimum cutout width; Minimum cutout height; Minimum cutout depth; Left-side ventilation clearance; Right-side ventilation clearance; Top clearance; Rear clearance; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Installation Instructions · secondary model/source
Model numbers covered: GZS24PYYFS. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
4 displayed measurements supported: Cabinet height; Height with hinge / controlling height; Depth without door; Depth with doors open at 90°.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Quick Specs · secondary model/source
Model numbers covered: GZS24PYYFS. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
1 displayed measurements supported: Hinge-side wall clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗www.charlotteappliance.com · Web source · Scope not established
Model numbers covered: GZS24PYYFS. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
1 displayed measurements supported: Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.