This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)
Last reviewed: 2026-09-05. 4 retained source records. 0 unresolved conflicts. Not every fit-critical input is supported.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
ExactFit does not have sufficient evidence for every fit-critical measurement. The fit checker will return Uncertain unless a known measurement already proves that the model does not fit.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | 35.75 in | ✓ Secondary source only | GE GSS28NGYBB Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit35.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GSS28NGYBB Quick Specs Dimensions (WxHxD) 35-3/4" x 69-15/16" x 36"Open original source ↗ Why this value was usedDimensions (WxHxD) 35-3/4" x 69-15/16" x 36" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | 68.9375 in | ✓ Conflicting sources — resolved | GE GSS28NGYBB Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit68.9375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GSS28NGYBB Quick Specs Popular-brand audit: exact endpoint for height_case_in is 68.9375 in; replaces 69.9375 in.Open original source ↗ Why this value was usedPopular-brand audit: exact endpoint for height_case_in is 68.9375 in; replaces 69.9375 in. Other evidence found
Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 69.9375 in | ✓ Secondary source only | GE GSS28NGYBB Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit69.9375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GSS28NGYBB Quick Specs Dimensions (WxHxD) 35-3/4" x 69-15/16" x 36"Open original source ↗ Why this value was usedDimensions (WxHxD) 35-3/4" x 69-15/16" x 36" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | 29.4375 in | ✓ Secondary source only | GE GSS28NGYBB Quick Specs assets.skulytics.io | Page 2 | |
Value used by ExactFit29.4375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GSS28NGYBB Quick Specs Case depth without doors, without handles (C) -> 29-7/16Open original source ↗ Why this value was usedCase depth without doors, without handles (C) -> 29-7/16 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 34 in | ✓ Conflicting sources — resolved | GE GSS28NGYBB Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit34 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GSS28NGYBB Quick Specs Popular-brand audit: exact endpoint for depth_less_handles_in is 34.0 in; replaces 36.0 in.Open original source ↗ Why this value was usedPopular-brand audit: exact endpoint for depth_less_handles_in is 34.0 in; replaces 36.0 in. Other evidence found
Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 36 in | ✓ Secondary source only | GE GSS28NGYBB Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit36 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GSS28NGYBB Quick Specs Dimensions (WxHxD) 35-3/4" x 69-15/16" x 36"Open original source ↗ Why this value was usedDimensions (WxHxD) 35-3/4" x 69-15/16" x 36" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 51.25 in | ✓ Secondary source only | GE GSS28NGYBB Quick Specs assets.skulytics.io | Page 2 | |
Value used by ExactFit51.25 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GSS28NGYBB Quick Specs Total depth with fresh food door open 90° (I) -> 51-1/4Open original source ↗ Why this value was usedTotal depth with fresh food door open 90° (I) -> 51-1/4 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | 36 in | ✓ Secondary source only · Calculated/inferred | GE GSS28NGYBB Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit36 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: 35.75 + 2 * 0.125 Confidence label: medium. Primary evidenceGE GSS28NGYBB Quick Specs Minimum opening derived from exact product width plus explicit Each side clearance: 35.75 + 2 * 0.125 = 36.0 in.Open original source ↗ Why this value was usedMinimum opening derived from exact product width plus explicit Each side clearance: 35.75 + 2 * 0.125 = 36.0 in. Calculation or inference: 35.75 + 2 * 0.125. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | Unknown | ? Not found · Calculated/inferred | GE measurement source — https://www.ajmadison.com/cgi-bin/ajmadison/GSE28NGYWW.html www.ajmadison.com | Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 69.9375 in plus propagated top cleara | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidenceGE measurement source — https://www.ajmadison.com/cgi-bin/ajmadison/GSE28NGYWW.html Minimum opening height derived from highest appliance endpoint 69.9375 in plus propagated top clearance 1.0 in.Open original source ↗ Why this value was usedA required calculation input lacks defensible evidence. Retained research value: 70.9375 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | Unknown | ? Not found · Calculated/inferred | GE GSE28NGYBB 36 Inch Freestanding Side-By-Side Refrigerator with 27.9 cu. ft. Capacity, 4 Glass Shelves, 2 Gallon Door Bins, External Ice & Water Dispenser, In-Door Icemaker, ADA Compliant, and ENERGY STAR®: Black www.ajmadison.com | Retained specification excerpt: Minimum opening depth derived from case-only depth 29.4375 in plus propagated rear clearance 2.0 in. | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidenceGE GSE28NGYBB 36 Inch Freestanding Side-By-Side Refrigerator with 27.9 cu. ft. Capacity, 4 Glass Shelves, 2 Gallon Door Bins, External Ice & Water Dispenser, In-Door Icemaker, ADA Compliant, and ENERGY STAR®: Black Minimum opening depth derived from case-only depth 29.4375 in plus propagated rear clearance 2.0 in.Open original source ↗ Why this value was usedA required calculation input lacks defensible evidence. Retained research value: 31.4375 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | 0.125 in | ✓ Secondary source only | GE GSS28NGYBB Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit0.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GSS28NGYBB Quick Specs Air Clearances table states Each side: 0.125 in.Open original source ↗ Why this value was usedAir Clearances table states Each side: 0.125 in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | 0.125 in | ✓ Secondary source only | GE GSS28NGYBB Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit0.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GSS28NGYBB Quick Specs Air Clearances table states Each side: 0.125 in.Open original source ↗ Why this value was usedAir Clearances table states Each side: 0.125 in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | Unknown | ? Not found · Calculated/inferred | GE measurement source — https://www.ajmadison.com/cgi-bin/ajmadison/GSE28NGYWW.html www.ajmadison.com | Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to GE GSE28NGYBB; original evidence: | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model GE GSE28NGYBB Confidence label: medium. Primary evidenceGE measurement source — https://www.ajmadison.com/cgi-bin/ajmadison/GSE28NGYWW.html Conflict-free corporate-family exact 8-dimension chassis match to GE GSE28NGYBB; original evidence: Top Air Clearances: 1"Open original source ↗ Why this value was usedThe stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 1 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | Unknown | ? Not found · Calculated/inferred | GE GSE28NGYBB 36 Inch Freestanding Side-By-Side Refrigerator with 27.9 cu. ft. Capacity, 4 Glass Shelves, 2 Gallon Door Bins, External Ice & Water Dispenser, In-Door Icemaker, ADA Compliant, and ENERGY STAR®: Black www.ajmadison.com | Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to GE GSE28NGYBB; original evidence: | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model GE GSE28NGYBB Confidence label: medium. Primary evidenceGE GSE28NGYBB 36 Inch Freestanding Side-By-Side Refrigerator with 27.9 cu. ft. Capacity, 4 Glass Shelves, 2 Gallon Door Bins, External Ice & Water Dispenser, In-Door Icemaker, ADA Compliant, and ENERGY STAR®: Black Conflict-free corporate-family exact 8-dimension chassis match to GE GSE28NGYBB; original evidence: Back: 2 InOpen original source ↗ Why this value was usedThe stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 2 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Hinge-side wall clearance | 3.75 in | ✓ Secondary source only | GE GSS28NGYBB Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit3.75 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: max(freezer-side 90deg wall clearance, fresh-food-side 90deg wall clearance) Confidence label: high. Primary evidenceGE GSS28NGYBB Quick Specs Exact-model GE table lists 90-degree adjacent-wall clearance for freezer side 3 11/16 in and fresh-food side 3 3/4 in; conservative either-side requirement is 3 3/4 in.Open original source ↗ Why this value was usedExact-model GE table lists 90-degree adjacent-wall clearance for freezer side 3 11/16 in and fresh-food side 3 3/4 in; conservative either-side requirement is 3 3/4 in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | 35.75 in | ✓ Secondary source only | GE GSS28NGYBB Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit35.75 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GSS28NGYBB Quick Specs Dimensions (WxHxD) 35-3/4" x 69-15/16" x 36"Open original source ↗ Why this value was usedDimensions (WxHxD) 35-3/4" x 69-15/16" x 36" Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Adjoining-wall clearance (reviewed endpoint) | 0.125 in | ✓ Secondary source only | GE GSS28NGYBB Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit0.125 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE GSS28NGYBB Quick Specs Air Clearances table states Each side: 0.125 in.Open original source ↗ Why this value was usedAir Clearances table states Each side: 0.125 in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Selected: 68.9375 in. Earlier retained values: 69.9375 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Popular-brand audit: exact endpoint for height_case_in is 68.9375 in; replaces 69.9375 in.
View source scope, location, and impact on fitSelected: 34 in. Earlier retained values: 36 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Popular-brand audit: exact endpoint for depth_less_handles_in is 34.0 in; replaces 36.0 in.
View source scope, location, and impact on fitNot found for safe fit use. Sources retained: https://www.ajmadison.com/cgi-bin/ajmadison/GSE28NGYWW.html. Related-model record: GSS28NGYBB.
A required calculation input lacks defensible evidence.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: https://www.ajmadison.com/cgi-bin/ajmadison/GSE28NGYBB.html. Related-model record: GSS28NGYBB.
A required calculation input lacks defensible evidence.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: https://www.ajmadison.com/cgi-bin/ajmadison/GSE28NGYWW.html. Related-model record: GSS28NGYBB.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: https://www.ajmadison.com/cgi-bin/ajmadison/GSE28NGYBB.html. Related-model record: GSS28NGYBB.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
assets.skulytics.io · Quick Specs · secondary model/source
Model numbers covered: GSS28NGYBB. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
11 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth with door, without handles; Depth with handle; Minimum cutout width; Left-side ventilation clearance; Right-side ventilation clearance; Hinge-side wall clearance; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Quick Specs · secondary model/source
Model numbers covered: GSS28NGYBB. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
2 displayed measurements supported: Depth without door; Depth with doors open at 90°.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗www.ajmadison.com · Web source · Scope not established
Model numbers covered: GSS28NGYBB. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
2 displayed measurements supported: Minimum cutout height; Top clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗www.ajmadison.com · Web source · Scope not established
Model numbers covered: GSS28NGYBB. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
2 displayed measurements supported: Minimum cutout depth; Rear clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.