Measurement evidence for GE GSE28NYYFS

Value used by ExactFit

35.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE® ENERGY STAR® 27.9 Cu. Ft. Side-By-Side Refrigerator with Extra Tall Dispenser and In-Door Icemaker - GSE28NYYFS - GE Appliances
GE · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Overall Width = 35.75 in | value\":\"69.94 in\"},{\"id\":\"13977368\",\"name\":\"Spec_WEIGHTS & DIME
Reviewed: 2026-09-04

Overall Width = 35.75 in | value\":\"69.94 in\"},{\"id\":\"13977368\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Overall Width\",\"value\":\"35.75 in\"},{\"id\":\"13977369\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Side Air Clearance

Why this value was used

Overall Width = 35.75 in | value\":\"69.94 in\"},{\"id\":\"13977368\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Overall Width\",\"value\":\"35.75 in\"},{\"id\":\"13977369\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Side Air Clearance

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.9375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE GSE28NYYFS Energy Guide
assets.skulytics.io · Energy Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Height to top of case (B) -> 68-15/16

Why this value was used

Height to top of case (B) -> 68-15/16

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.9375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE GSE28NYYFS Energy Guide
assets.skulytics.io · Energy Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Height to top of hinge and door (A) -> 69-15/16

Why this value was used

Height to top of hinge and door (A) -> 69-15/16

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.4375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE GSE28NYYFS Energy Guide
assets.skulytics.io · Energy Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Case depth without doors, without handles (C) -> 29-7/16

Why this value was used

Case depth without doors, without handles (C) -> 29-7/16

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE® ENERGY STAR® 27.9 Cu. Ft. Side-By-Side Refrigerator with Extra Tall Dispenser and In-Door Icemaker - GSE28NYYFS - GE Appliances
GE · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Without Handle = 34.0 in | "value\":\"3.75 in\"},{\"id\":\"13977360\",\"name\":\"Spec_WEIGHTS
Reviewed: 2026-09-04

Depth Without Handle = 34.0 in | "value\":\"3.75 in\"},{\"id\":\"13977360\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Depth Without Handle\",\"value\":\"34 in\"},{\"id\":\"13977361\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Depth with Door Op

Why this value was used

Depth Without Handle = 34.0 in | "value\":\"3.75 in\"},{\"id\":\"13977360\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Depth Without Handle\",\"value\":\"34 in\"},{\"id\":\"13977361\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Depth with Door Op

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE® ENERGY STAR® 27.9 Cu. Ft. Side-By-Side Refrigerator with Extra Tall Dispenser and In-Door Icemaker - GSE28NYYFS - GE Appliances
GE · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with Handle = 36.0 in | \":\"36 in\"},{\"id\":\"13977366\",\"name\":\"Spec_WEIGHTS & DIMENSION
Reviewed: 2026-09-04

Depth with Handle = 36.0 in | \":\"36 in\"},{\"id\":\"13977366\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Overall Depth with Handle\",\"value\":\"36 in\"},{\"id\":\"13977367\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Overall Height\",\

Why this value was used

Depth with Handle = 36.0 in | \":\"36 in\"},{\"id\":\"13977366\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Overall Depth with Handle\",\"value\":\"36 in\"},{\"id\":\"13977367\",\"name\":\"Spec_WEIGHTS & DIMENSIONS_Overall Height\",\

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

51.25 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE GSE28NYYFS Energy Guide
assets.skulytics.io · Energy Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Total depth with fresh food door open 90° (I) -> 51-1/4

Why this value was used

Total depth with fresh food door open 90° (I) -> 51-1/4

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.75 + 2 * 0.125

Confidence label: medium.

Primary evidence

GE measurement source — https://www.ajmadison.com/cgi-bin/ajmadison/GSE28NYYFS.html + local-cache manufacturer-family consensus
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.0 in from product width 35.75 in and explicit 0.125 in clearance on
Reviewed: 2026-09-04

Derived minimum opening width 36.0 in from product width 35.75 in and explicit 0.125 in clearance on each side.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 36 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.9375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

GE® ENERGY STAR® 27.9 Cu. Ft. Side-By-Side Refrigerator with Extra Tall Dispenser and In-Door Icemaker - GSE28NYYFS - GE Appliances
GE · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 69.9375 in plus documented top cleara
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 69.9375 in plus documented top clearance 1.0 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 69.9375 in plus documented top clearance 1.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

GE GSE28NGYBB 36 Inch Freestanding Side-By-Side Refrigerator with 27.9 cu. ft. Capacity, 4 Glass Shelves, 2 Gallon Door Bins, External Ice & Water Dispenser, In-Door Icemaker, ADA Compliant, and ENERGY STAR®: Black
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening depth derived from case-only depth 29.4375 in plus propagated rear clearance 2.0 in.
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.4375 in plus propagated rear clearance 2.0 in.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 31.4375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.125 in per-side installation clearance from dominant manufacturer-family specification pa
Reviewed: 2026-09-05

Inferred 0.125 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.125 in per-side installation clearance from dominant manufacturer-family specification pa
Reviewed: 2026-09-05

Inferred 0.125 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE® ENERGY STAR® 27.9 Cu. Ft. Side-By-Side Refrigerator with Extra Tall Dispenser and In-Door Icemaker - GSE28NYYFS - GE Appliances
GE · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Top Air Clearances\",\"value\":\"1 in
Reviewed: 2026-09-05

Top Air Clearances\",\"value\":\"1 in

Why this value was used

Top Air Clearances\",\"value\":\"1 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model GE GSE28NGYBB

Confidence label: medium.

Primary evidence

GE GSE28NGYBB 36 Inch Freestanding Side-By-Side Refrigerator with 27.9 cu. ft. Capacity, 4 Glass Shelves, 2 Gallon Door Bins, External Ice & Water Dispenser, In-Door Icemaker, ADA Compliant, and ENERGY STAR®: Black
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to GE GSE28NGYBB; original evidence:
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to GE GSE28NGYBB; original evidence: Back: 2 In

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 2 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: max(freezer-side 90deg wall clearance, fresh-food-side 90deg wall clearance)

Confidence label: high.

Primary evidence

GE GSE28NYYFS Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Exact-model GE table lists 90-degree adjacent-wall clearance for freezer side 3 11/16 in and fresh-food side 3 3/4 in; conservative either-side requirement is 3 3/4 in.

Why this value was used

Exact-model GE table lists 90-degree adjacent-wall clearance for freezer side 3 11/16 in and fresh-food side 3 3/4 in; conservative either-side requirement is 3 3/4 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in mapped from populated width_doors_closed_in; doors do not materially change closed product width

Confidence label: low.

Primary evidence

GE GSE28NYYFS 36 Inch Freestanding Side-By- ...
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Low-confidence same-appliance width mapping: case_width_in=35.75 in from width_doors_closed_in.
Reviewed: 2026-09-04

Low-confidence same-appliance width mapping: case_width_in=35.75 in from width_doors_closed_in.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 35.75 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Strong modal installation clearance for this manufacturer family

Confidence label: low.

Primary evidence

GE measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.125 in per-side installation clearance from dominant manufacturer-family specification pa
Reviewed: 2026-09-04

Inferred 0.125 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.