This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-09-09. 2 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
Measurements and supporting evidence
Measurement
Value used
Evidence status
Primary source
Location
Details
Overall width
32.75 in
? Verified — finalized database measurement
GE measurement source — ge-gne25jykfs.json assets.skulytics.io
Retained specification excerpt: Overall Width 32.75 in
Value used by ExactFit
32.75 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
GE measurement source — ge-gne25jykfs.json assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Overall Width 32.75 in Reviewed: 2026-09-09
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
GE measurement source — ge-gne25jykfs.json assets.skulytics.io
Retained specification excerpt: Height to Top of Case 68.625 in
Value used by ExactFit
68.625 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
GE measurement source — ge-gne25jykfs.json assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Height to Top of Case 68.625 in Reviewed: 2026-09-09
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
GE measurement source — ge-gne25jykfs.json images.salsify.com
Page 25
Value used by ExactFit
69.875 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
GE measurement source — ge-gne25jykfs.json images.salsify.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 25 Reviewed: 2026-09-09
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
GE measurement source — ge-gne25jykfs.json assets.skulytics.io
Retained specification excerpt: Case Depth Without Door 30.625 in
Value used by ExactFit
30.625 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
GE measurement source — ge-gne25jykfs.json assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Case Depth Without Door 30.625 in Reviewed: 2026-09-09
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
GE measurement source — ge-gne25jykfs.json assets.skulytics.io
Page 1
Value used by ExactFit
35 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
GE measurement source — ge-gne25jykfs.json assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-09
GE measurement source — ge-gne25jykfs.json assets.skulytics.io
Page 1
Value used by ExactFit
37.5 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
GE measurement source — ge-gne25jykfs.json assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-09
GE measurement source — ge-gne25jykfs.json assets.skulytics.io
Page 1
Value used by ExactFit
48.375 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
GE measurement source — ge-gne25jykfs.json assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-09
Depth with fresh-food door at 90 degrees 48 3/8 in
GE measurement source — ge-gne25jykfs.json assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: GE additive installation-envelope calculation from high-confidence operands: case_width_in=32.75, si Reviewed: 2026-09-09
GE additive installation-envelope calculation from high-confidence operands: case_width_in=32.75, side_ventilation_clearance_in=0.125; result=33 in.
GE additive installation-envelope calculation from high-confidence operands: case_width_in=32.75, side_ventilation_clearance_in=0.125; result=33 in. Calculation or inference: case_width_in + 2 * side_ventilation_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
GE measurement source — ge-gne25jykfs.json assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: GE additive installation-envelope calculation from high-confidence operands: height_hinge_in=69.875, Reviewed: 2026-09-09
GE additive installation-envelope calculation from high-confidence operands: height_hinge_in=69.875, top_clearance_in=1; result=70.875 in.
GE additive installation-envelope calculation from high-confidence operands: height_hinge_in=69.875, top_clearance_in=1; result=70.875 in. Calculation or inference: height_hinge_in + top_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
GE measurement source — ge-gne25jykfs.json assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: {"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cach Reviewed: 2026-09-09
{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "data/truth-set/ge-gne25jykfs.json", "page": "Weights & Dimensions", "raw": "Case Depth Without Door 30.625 in", "source_url": "https://www.geappliances.com/appliance/GE-ENERGY-STAR-24-7-Cu-Ft-French-Door-Refrigerator-GNE25JYKFS", "value_in": 30.625}, {"cache_path": "docs/provider-evaluation/raw/skulytics/active-residential-refrigerators-1000-20260817/documents/GE/GNE25JMKES/105173092.pdf", "page": 1, "raw": "Case depth without door (in.) D -> 30-5/8", "source_url": "https://assets.skulytics.io/assets/docs/GNE25JMKES-105173092.pdf", "value_in": 30.625}], "rear_clearance_in": [{"cache_path": "data/truth-set/ge-gne25jykfs.json", "page": 26, "raw": "Back 2 in", "source_url": "https://images.salsify.com/image/upload/s--pXl3lhs0--/62273f4600c3c24f47bbb5cd4efe87bc62d6e7c2.pdf", "value_in": 2.0}, {"cache_path": "D:/active-residential-refrigerators-1000-20260817/documents/GE/GNE25JMKES/105173092.pdf", "page": 1, "raw": "Exact-model cached GE ordered table; trailing Each side / Top / Back trio. Values: alternate exact-model layout; top=1; back=2", "source_url": "https://assets.skulytics.io/assets/docs/GNE25JMKES-105173092.pdf", "value_in": 2.0}]}, "result_in": 32.625}
{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "data/truth-set/ge-gne25jykfs.json", "page": "Weights & Dimensions", "raw": "Case Depth Without Door 30.625 in", "source_url": "https://www.geappliances.com/appliance/GE-ENERGY-STAR-24-7-Cu-Ft-French-Door-Refrigerator-GNE25JYKFS", "value_in": 30.625}, {"cache_path": "docs/provider-evaluation/raw/skulytics/active-residential-refrigerators-1000-20260817/documents/GE/GNE25JMKES/105173092.pdf", "page": 1, "raw": "Case depth without door (in.) D -> 30-5/8", "source_url": "https://assets.skulytics.io/assets/docs/GNE25JMKES-105173092.pdf", "value_in": 30.625}], "rear_clearance_in": [{"cache_path": "data/truth-set/ge-gne25jykfs.json", "page": 26, "raw": "Back 2 in", "source_url": "https://images.salsify.com/image/upload/s--pXl3lhs0--/62273f4600c3c24f47bbb5cd4efe87bc62d6e7c2.pdf", "value_in": 2.0}, {"cache_path": "D:/active-residential-refrigerators-1000-20260817/documents/GE/GNE25JMKES/105173092.pdf", "page": 1, "raw": "Exact-model cached GE ordered table; trailing Each side / Top / Back trio. Values: alternate exact-model layout; top=1; back=2", "source_url": "https://assets.skulytics.io/assets/docs/GNE25JMKES-105173092.pdf", "value_in": 2.0}]}, "result_in": 32.625} Calculation or inference: depth_case_only_in + rear_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
GE measurement source — ge-gne25jykfs.json images.salsify.com
Page 26
Value used by ExactFit
0.125 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
GE measurement source — ge-gne25jykfs.json images.salsify.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 26 Reviewed: 2026-09-09
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
GE measurement source — ge-gne25jykfs.json images.salsify.com
Page 26
Value used by ExactFit
0.125 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
GE measurement source — ge-gne25jykfs.json images.salsify.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 26 Reviewed: 2026-09-09
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
GE measurement source — ge-gne25jykfs.json assets.skulytics.io
Page 26
Value used by ExactFit
1 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
GE measurement source — ge-gne25jykfs.json assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Page 26 Reviewed: 2026-09-09
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
GE measurement source — ge-gne25jykfs.json assets.skulytics.io
Page 26
Value used by ExactFit
2 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
GE measurement source — ge-gne25jykfs.json assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Page 26 Reviewed: 2026-09-09
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
GE measurement source — quick-specs-rev-12-24.pdf images.salsify.com
Page 1
Value used by ExactFit
4.0625 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: (40.875 - 32.75) / 2
Confidence label: high.
Primary evidence
GE measurement source — quick-specs-rev-12-24.pdf images.salsify.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-09
GE measurement source — ge-gne25jykfs.json assets.skulytics.io
Retained specification excerpt: Overall Width 32.75 in
Value used by ExactFit
32.75 in · Fit role: Informational only.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
GE measurement source — ge-gne25jykfs.json assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Overall Width 32.75 in Reviewed: 2026-09-09
GE measurement source — quick-specs-rev-12-24.pdf images.salsify.com
Page 1
Value used by ExactFit
4.0625 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: (40.875 - 32.75) / 2
Confidence label: high.
Primary evidence
GE measurement source — quick-specs-rev-12-24.pdf images.salsify.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-09
assets.skulytics.io · Web source · Scope not established
Model numbers covered: GNE25JMKES. Publication/revision date: Not recorded. Reviewed: 2026-09-09.
15 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Minimum cutout width; Minimum cutout height; Minimum cutout depth; Left-side ventilation clearance; Right-side ventilation clearance; Top clearance; Rear clearance; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Evidence reflects the sources reviewed on 2026-09-09. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.
