Measurement evidence for Fisher and Paykel RS2484SRHK1

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Fisher and Paykel RS2484SRHK1 fit check Check this model against your opening How ExactFit verifies measurements

Fisher and Paykel RS2484SRHK1

Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Incomplete evidence

0exact-model manufacturer values

4verified equivalent/same-chassis values

0secondary-source-only values

12values with unresolved source details

Last reviewed: 2026-09-05. 2 retained source records. 0 unresolved conflicts. Not every fit-critical input is supported.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

ExactFit does not have sufficient evidence for every fit-critical measurement. The fit checker will return Uncertain unless a known measurement already proves that the model does not fit.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	Unknown	? Not found	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Not established Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RS2484SRHK1: width_doors_closed_in = 23.75 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 23.75 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	Unknown	? Not found	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Not established Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RS2484SRHK1: height_case_in = 84 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 84 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	Unknown	? Not found	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Not established Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RS2484SRHK1: height_hinge_in = 84 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 84 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	Unknown	? Not found	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Not established Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RS2484SRHK1: depth_case_only_in = 24 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 24 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	Unknown	? Not found · Calculated/inferred	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit Unknown · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + 0.75 in standard panel Confidence label: medium. Calculation inputs: Depth without door; Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Not established Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-04 24 in chassis plus the planning guide's standard 3/4 in door panel. Open original source ↗ Why this value was used A required calculation input lacks defensible evidence. Retained research value: 24.75 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found 24 in — superseded 74477907.pdf (p.1); page 1. Model scope: not separately recorded. Raw value: G Overall depth of product (excl. door front panel) -> 24". The final reviewed registry supersedes this earlier audit value. 24 in chassis plus the planning guide's standard 3/4 in door panel. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	Unknown	? Not found · Calculated/inferred	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit Unknown · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + 0.75 in panel + 1.625 in handle Confidence label: medium. Calculation inputs: Depth without door; Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Not established Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-04 Planning-guide installed configuration: 24 in chassis + 3/4 in panel + 1 5/8 in handle. Open original source ↗ Why this value was used A required calculation input lacks defensible evidence. Retained research value: 26.375 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found 24 in — superseded https://www.fisherpaykel.com/us/cooling/integrated/24in-series-9-integrated-column-refrigerator-water-rs2484srhk1-26880.html; location not retained. Model scope: not separately recorded. Raw value: Plain exact-model specification row: Depth = 24.0 in \| ply voltage \| 115V \| ### Product dimensions \| Product dimensions Attributes \| Value \| \| --- \| --- \| \| Depth \| 24" \| \| Height \| 84" \| \| Width \| 23 3⁄4" \| ## Resources Select Select Individual Files Select All Files Cancel _Please note. The final reviewed registry supersedes this earlier audit value. Planning-guide installed configuration: 24 in chassis + 3/4 in panel + 1 5/8 in handle. Open alternative source ↗ Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	Unknown	? Not found · Calculated/inferred	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_less_handles_in + 26 in open-door projection Confidence label: medium. Calculation inputs: Depth with door, without handles; Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Not established Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-04 Installed closed depth 24 3/4 in plus 26 in 90-degree open-door projection. Open original source ↗ Why this value was used A required calculation input lacks defensible evidence. Retained research value: 50.75 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	Unknown	? Not found	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Not established Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RS2484SRHK1: min_cutout_width_in = 24 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 24 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	84 in	✓ Verified — equivalent model · Calculated/inferred	Fisher Paykel RS2484FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 6
Value used by ExactFit 84 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from RS2484FLJE1 Confidence label: medium. Primary evidence Fisher Paykel RS2484FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 6 Reviewed: 2026-09-05 Conflict-free identical-chassis propagation from Fisher_Paykel RS2484FLJE1: min_cutout_height_in=84.0 in. Open original source ↗ Why this value was used Conflict-free identical-chassis propagation from Fisher_Paykel RS2484FLJE1: min_cutout_height_in=84.0 in. Calculation or inference: identical 8-dimension chassis signature; propagated from RS2484FLJE1. Why evidence from RS2484FLJE1 applies Target model: RS2484SRHK1. Supporting model: RS2484FLJE1. Manufacturer: Fisher and Paykel. Product family and measurement relationship: identical 8-dimension chassis signature; propagated from RS2484FLJE1. Measurement transferred: Minimum cutout height. Relevant equivalence evidence: Conflict-free identical-chassis propagation from Fisher_Paykel RS2484FLJE1: min_cutout_height_in=84.0 in.. Known differences: not separately recorded. Review decision: identical chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	25 in	✓ Verified — equivalent model	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit 25 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-05 Exact family table: minimum shallow cavity depth 25 in when services are outside cavity. Open original source ↗ Why this value was used Exact family table: minimum shallow cavity depth 25 in when services are outside cavity. Why evidence from RS1884FLJE1 applies Target model: RS2484SRHK1. Supporting model: RS1884FLJE1. Manufacturer: Fisher and Paykel. Product family and measurement relationship: Exact family table: minimum shallow cavity depth 25 in when services are outside cavity.. Measurement transferred: Minimum cutout depth. Relevant equivalence evidence: Exact family table: minimum shallow cavity depth 25 in when services are outside cavity.. Known differences: not separately recorded. Review decision: cached exact model family guide; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	0.125 in	✓ Verified — equivalent model	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit 0.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-05 Exact family table: minimum cabinetry gap from edge of door panel 1/8 in. Open original source ↗ Why this value was used Exact family table: minimum cabinetry gap from edge of door panel 1/8 in. Why evidence from RS1884FLJE1 applies Target model: RS2484SRHK1. Supporting model: RS1884FLJE1. Manufacturer: Fisher and Paykel. Product family and measurement relationship: Exact family table: minimum cabinetry gap from edge of door panel 1/8 in.. Measurement transferred: Left-side ventilation clearance. Relevant equivalence evidence: Exact family table: minimum cabinetry gap from edge of door panel 1/8 in.. Known differences: not separately recorded. Review decision: cached exact model family guide; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	0.125 in	✓ Verified — equivalent model	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit 0.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-05 Exact family table: minimum cabinetry gap from edge of door panel 1/8 in. Open original source ↗ Why this value was used Exact family table: minimum cabinetry gap from edge of door panel 1/8 in. Why evidence from RS1884FLJE1 applies Target model: RS2484SRHK1. Supporting model: RS1884FLJE1. Manufacturer: Fisher and Paykel. Product family and measurement relationship: Exact family table: minimum cabinetry gap from edge of door panel 1/8 in.. Measurement transferred: Right-side ventilation clearance. Relevant equivalence evidence: Exact family table: minimum cabinetry gap from edge of door panel 1/8 in.. Known differences: not separately recorded. Review decision: cached exact model family guide; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	Unknown	? Not found · Calculated/inferred	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: min_cutout_height_in - height_case_in Confidence label: medium. Calculation inputs: Cabinet height; Minimum cutout height; Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Not established Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-05 Exact family table: product height and cavity overall height are both 84 in. Open original source ↗ Why this value was used A required calculation input lacks defensible evidence. Retained research value: 0 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	Unknown	? Not found · Calculated/inferred	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: min_cutout_depth_in - depth_case_only_in - 0.75 in panel Confidence label: medium. Calculation inputs: Depth without door; Minimum cutout depth; Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Not established Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-05 Exact shallow-cavity table: 25 in cavity minus 24 in chassis minus assumed 3/4 in door panel = 1/4 in rear residual. Open original source ↗ Why this value was used A required calculation input lacks defensible evidence. Retained research value: 0.25 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	4.3125 in	✓ Verified — equivalent model	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit 4.3125 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-05 Exact family table: minimum door clearance to adjacent wall at 90 degrees is 4 5/16 in; normalizes rounded 4.312. Open original source ↗ Why this value was used Exact family table: minimum door clearance to adjacent wall at 90 degrees is 4 5/16 in; normalizes rounded 4.312. Why evidence from RS1884FLJE1 applies Target model: RS2484SRHK1. Supporting model: RS1884FLJE1. Manufacturer: Fisher and Paykel. Product family and measurement relationship: Exact family table: minimum door clearance to adjacent wall at 90 degrees is 4 5/16 in; normalizes rounded 4.312.. Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: Exact family table: minimum door clearance to adjacent wall at 90 degrees is 4 5/16 in; normalizes rounded 4.312.. Known differences: not separately recorded. Review decision: cached exact model family guide normalization; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	Unknown	? Not found	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit Unknown · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Not established Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RS2484SRHK1: case_width_in = 23.75 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 23.75 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	Unknown	? Not found	Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io	Page 17
Value used by ExactFit Unknown · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RS1884FLJE1 Planning Guide Integrated Refrigeration assets.skulytics.io · Planning Guide Integrated Refrigeration Model scope: Not established Publication/revision date: Not recorded Location: Page 17 Reviewed: 2026-09-04 Minimum door clearance to adjacent wall at 90 degrees: 4 5/16 in. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 4.3125 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found 14 in — superseded 74477906.pdf; page 1. Model scope: not separately recorded. Raw value: Exact byte-identical PDF (SHA-256 6d1007c7f0b4b32846bc45e2a476aed05b904f86dea76c7f68935af5dfac5669) shared with variant(s) RS2484SRK1. Minimum door clearance to adjacent wall (115° – full internal access) = 14".. The final reviewed registry supersedes this earlier audit value. Minimum door clearance to adjacent wall at 90 degrees: 4 5/16 in. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Depth with door, without handles

Selected: Unknown. Earlier retained values: 24 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

A required calculation input lacks defensible evidence.

View source scope, location, and impact on fit

Depth with handle

Selected: Unknown. Earlier retained values: 24 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

A required calculation input lacks defensible evidence.

View source scope, location, and impact on fit

Adjoining-wall clearance (reviewed endpoint)

Selected: Unknown. Earlier retained values: 14 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

View source scope, location, and impact on fit