Measurement evidence for Fisher and Paykel RF170WDRX5N

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Fisher and Paykel RF170WDRX5N fit check Check this model against your opening How ExactFit verifies measurements

Fisher and Paykel RF170WDRX5N

Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Incomplete evidence

0exact-model manufacturer values

3verified equivalent/same-chassis values

0secondary-source-only values

13values with unresolved source details

Last reviewed: 2026-09-05. 4 retained source records. 0 unresolved conflicts. Not every fit-critical input is supported.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

ExactFit does not have sufficient evidence for every fit-critical measurement. The fit checker will return Uncertain unless a known measurement already proves that the model does not fit.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	Unknown	? Not found	Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io	Page 9
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io · Installation Guide Refrigerator Freezer EN Model scope: Not established Publication/revision date: Not recorded Location: Page 9 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RF170WDRX5N: width_doors_closed_in = 31.125 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 31.125 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	Unknown	? Not found	Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io	Page 9
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io · Installation Guide Refrigerator Freezer EN Model scope: Not established Publication/revision date: Not recorded Location: Page 9 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RF170WDRX5N: height_case_in = 67.75 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 67.75 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	Unknown	? Not found	Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io	Page 9
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io · Installation Guide Refrigerator Freezer EN Model scope: Not established Publication/revision date: Not recorded Location: Page 9 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RF170WDRX5N: height_hinge_in = 67.75 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 67.75 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	Unknown	? Not found	Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io	Page 9
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io · Installation Guide Refrigerator Freezer EN Model scope: Not established Publication/revision date: Not recorded Location: Page 9 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RF170WDRX5N: depth_case_only_in = 24.625 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 24.625 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found 27.375 in — superseded 105166743.pdf (p.6); page 6. Model scope: not separately recorded. Raw value: C Overall depth of product (excludes handle & -> 27 3/8. The final reviewed registry supersedes this earlier audit value. Reviewed manufacturer dimensions for RF170WDRX5N: depth_case_only_in = 24.625 in Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	Unknown	? Not found	Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io	Page 9
Value used by ExactFit Unknown · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io · Installation Guide Refrigerator Freezer EN Model scope: Not established Publication/revision date: Not recorded Location: Page 9 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RF170WDRX5N: depth_less_handles_in = 27.375 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 27.375 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	Unknown	? Not found	Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io	Page 9
Value used by ExactFit Unknown · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io · Installation Guide Refrigerator Freezer EN Model scope: Not established Publication/revision date: Not recorded Location: Page 9 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RF170WDRX5N: depth_with_handles_in = 29 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 29 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	Unknown	? Not found	Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io	Page 9
Value used by ExactFit Unknown · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io · Installation Guide Refrigerator Freezer EN Model scope: Not established Publication/revision date: Not recorded Location: Page 9 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RF170WDRX5N: depth_doors_open_90_in = 56.6875 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 56.6875 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	Unknown	? Not found	Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io	Page 9
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io · Installation Guide Refrigerator Freezer EN Model scope: Not established Publication/revision date: Not recorded Location: Page 9 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RF170WDRX5N: min_cutout_width_in = 32.6875 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 32.6875 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found 33.5 in — superseded 105166746.pdf + 105166746.pdf; page 2. Model scope: not separately recorded. Raw value: Minimum opening derived from exact product width plus explicit symmetric side spacing: 31.125 + 2 * 1.1875 = 33.5 in. Side evidence: clearance each side 1 3/16 ". The final reviewed registry supersedes this earlier audit value. Reviewed manufacturer dimensions for RF170WDRX5N: min_cutout_width_in = 32.6875 in Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	Unknown	? Not found · Calculated/inferred	Fisher Paykel RF170WDRUX5N User Guide assets.skulytics.io	Page 13
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence Fisher Paykel RF170WDRUX5N User Guide assets.skulytics.io · User Guide Model scope: Not established Publication/revision date: Not recorded Location: Page 13 Reviewed: 2026-09-05 Minimum opening height derived from highest stored appliance endpoint 67.75 in plus documented top clearance 2.0 in. Open original source ↗ Why this value was used A required calculation input lacks defensible evidence. Retained research value: 69.75 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	Unknown	? Not found · Calculated/inferred	Fisher Paykel RF170WDRUX5N Quick Reference guide assets.skulytics.io	Page 2
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence Fisher Paykel RF170WDRUX5N Quick Reference guide assets.skulytics.io · Quick Reference guide Model scope: Not established Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Minimum opening depth derived from case-only depth 24.625 in plus documented rear clearance 1.188 in. Open original source ↗ Why this value was used A required calculation input lacks defensible evidence. Retained research value: 25.813 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	1.188 in	✓ Verified — equivalent model · Calculated/inferred	Fisher Paykel RF170WDRUX5N Quick Reference guide assets.skulytics.io	Page 2
Value used by ExactFit 1.188 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from RF170WDRUX5N Confidence label: medium. Primary evidence Fisher Paykel RF170WDRUX5N Quick Reference guide assets.skulytics.io · Quick Reference guide Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Conflict-free identical-chassis propagation from Fisher_Paykel RF170WDRUX5N: side_ventilation_clearance_in=1.188 in. Open original source ↗ Why this value was used Conflict-free identical-chassis propagation from Fisher_Paykel RF170WDRUX5N: side_ventilation_clearance_in=1.188 in. Calculation or inference: identical 8-dimension chassis signature; propagated from RF170WDRUX5N. Why evidence from RF170WDRUX5N applies Target model: RF170WDRX5N. Supporting model: RF170WDRUX5N. Manufacturer: Fisher and Paykel. Product family and measurement relationship: identical 8-dimension chassis signature; propagated from RF170WDRUX5N. Measurement transferred: Left-side ventilation clearance. Relevant equivalence evidence: Conflict-free identical-chassis propagation from Fisher_Paykel RF170WDRUX5N: side_ventilation_clearance_in=1.188 in.. Known differences: not separately recorded. Review decision: identical chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	1.188 in	✓ Verified — equivalent model · Calculated/inferred	Fisher Paykel RF170WDRUX5N Quick Reference guide assets.skulytics.io	Page 2
Value used by ExactFit 1.188 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from RF170WDRUX5N Confidence label: medium. Primary evidence Fisher Paykel RF170WDRUX5N Quick Reference guide assets.skulytics.io · Quick Reference guide Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Conflict-free identical-chassis propagation from Fisher_Paykel RF170WDRUX5N: side_ventilation_clearance_in=1.188 in. Open original source ↗ Why this value was used Conflict-free identical-chassis propagation from Fisher_Paykel RF170WDRUX5N: side_ventilation_clearance_in=1.188 in. Calculation or inference: identical 8-dimension chassis signature; propagated from RF170WDRUX5N. Why evidence from RF170WDRUX5N applies Target model: RF170WDRX5N. Supporting model: RF170WDRUX5N. Manufacturer: Fisher and Paykel. Product family and measurement relationship: identical 8-dimension chassis signature; propagated from RF170WDRUX5N. Measurement transferred: Right-side ventilation clearance. Relevant equivalence evidence: Conflict-free identical-chassis propagation from Fisher_Paykel RF170WDRUX5N: side_ventilation_clearance_in=1.188 in.. Known differences: not separately recorded. Review decision: identical chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	2 in	✓ Verified — equivalent model · Calculated/inferred	Fisher Paykel RF170WDRUX5N User Guide assets.skulytics.io	Page 13
Value used by ExactFit 2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from RF170WDRUX5N Confidence label: medium. Primary evidence Fisher Paykel RF170WDRUX5N User Guide assets.skulytics.io · User Guide Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 13 Reviewed: 2026-09-05 Conflict-free identical-chassis propagation from Fisher_Paykel RF170WDRUX5N: top_clearance_in=2.0 in. Open original source ↗ Why this value was used Conflict-free identical-chassis propagation from Fisher_Paykel RF170WDRUX5N: top_clearance_in=2.0 in. Calculation or inference: identical 8-dimension chassis signature; propagated from RF170WDRUX5N. Why evidence from RF170WDRUX5N applies Target model: RF170WDRX5N. Supporting model: RF170WDRUX5N. Manufacturer: Fisher and Paykel. Product family and measurement relationship: identical 8-dimension chassis signature; propagated from RF170WDRUX5N. Measurement transferred: Top clearance. Relevant equivalence evidence: Conflict-free identical-chassis propagation from Fisher_Paykel RF170WDRUX5N: top_clearance_in=2.0 in.. Known differences: not separately recorded. Review decision: identical chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	1.188 in	✓ Verified — equivalent model · Calculated/inferred	Fisher Paykel RF170WDRUX5N Quick Reference guide assets.skulytics.io	Page 2
Value used by ExactFit 1.188 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from RF170WDRUX5N Confidence label: medium. Primary evidence Fisher Paykel RF170WDRUX5N Quick Reference guide assets.skulytics.io · Quick Reference guide Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Conflict-free identical-chassis propagation from Fisher_Paykel RF170WDRUX5N: rear_clearance_in=1.188 in. Open original source ↗ Why this value was used Conflict-free identical-chassis propagation from Fisher_Paykel RF170WDRUX5N: rear_clearance_in=1.188 in. Calculation or inference: identical 8-dimension chassis signature; propagated from RF170WDRUX5N. Why evidence from RF170WDRUX5N applies Target model: RF170WDRX5N. Supporting model: RF170WDRUX5N. Manufacturer: Fisher and Paykel. Product family and measurement relationship: identical 8-dimension chassis signature; propagated from RF170WDRUX5N. Measurement transferred: Rear clearance. Relevant equivalence evidence: Conflict-free identical-chassis propagation from Fisher_Paykel RF170WDRUX5N: rear_clearance_in=1.188 in.. Known differences: not separately recorded. Review decision: identical chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	Unknown	? Not found · Calculated/inferred	Fisher Paykel RF170WDRJX5 User Guide assets.skulytics.io	Page 13
Value used by ExactFit Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: model-series prefix RF170WDR; 2 direct seeds; unanimous value 3.562 Confidence label: medium. Primary evidence Fisher Paykel RF170WDRJX5 User Guide assets.skulytics.io · User Guide Model scope: Not established Publication/revision date: Not recorded Location: Page 13 Reviewed: 2026-09-05 Conflict-free 8-character model-series consensus (RF170WDR) from 2 directly evidenced models; example Fisher_Paykel RF170WDRJX5: M Side clearance — hinge side flush with door — 90° rotation \| 3 9/16" (90) \| 3 9/16" (90) Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 3.562 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	Unknown	? Not found	Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io	Page 9
Value used by ExactFit Unknown · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io · Installation Guide Refrigerator Freezer EN Model scope: Not established Publication/revision date: Not recorded Location: Page 9 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RF170WDRX5N: case_width_in = 31.125 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 31.125 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	Unknown	? Not found	Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io	Page 9
Value used by ExactFit Unknown · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN assets.skulytics.io · Installation Guide Refrigerator Freezer EN Model scope: Not established Publication/revision date: Not recorded Location: Page 9 Reviewed: 2026-09-04 Reviewed manufacturer dimensions for RF170WDRX5N: side_clearance_wall_in = 3.5625 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 3.5625 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found 1.1875 in — superseded 105166746.pdf; page 2. Model scope: not separately recorded. Raw value: clearance each side 1 3/16 ". The final reviewed registry supersedes this earlier audit value. Reviewed manufacturer dimensions for RF170WDRX5N: side_clearance_wall_in = 3.5625 in Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Depth without door

Selected: Unknown. Earlier retained values: 27.375 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

View source scope, location, and impact on fit

Minimum cutout width

Selected: Unknown. Earlier retained values: 33.5 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

View source scope, location, and impact on fit

Adjoining-wall clearance (reviewed endpoint)

Selected: Unknown. Earlier retained values: 1.1875 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

View source scope, location, and impact on fit

Measurements not established

Overall width

Not found for safe fit use. Sources retained: 90368803.pdf. Related-model record: RF170WDLUX5N.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Cabinet height

Not found for safe fit use. Sources retained: 90368803.pdf. Related-model record: RF170WDLUX5N.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Height with hinge / controlling height

Not found for safe fit use. Sources retained: 90368803.pdf. Related-model record: RF170WDLUX5N.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Depth without door

Not found for safe fit use. Sources retained: 90368803.pdf. Related-model record: RF170WDLUX5N.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Depth with door, without handles

Not found for safe fit use. Sources retained: 90368803.pdf. Related-model record: RF170WDLUX5N.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Depth with handle

Not found for safe fit use. Sources retained: 90368803.pdf. Related-model record: RF170WDLUX5N.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Depth with doors open at 90°

Not found for safe fit use. Sources retained: 90368803.pdf. Related-model record: RF170WDLUX5N.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Minimum cutout width

Not found for safe fit use. Sources retained: 90368803.pdf. Related-model record: RF170WDLUX5N.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Minimum cutout height

Not found for safe fit use. Sources retained: 82612231.pdf. Related-model record: RF170WDRUX5N.

A required calculation input lacks defensible evidence.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Minimum cutout depth

Not found for safe fit use. Sources retained: 82612230.pdf. Related-model record: RF170WDRUX5N.

A required calculation input lacks defensible evidence.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Hinge-side wall clearance

Not found for safe fit use. Sources retained: 74613311.pdf. Related-model record: RF170WDRJX5.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Cabinet case width

Not found for safe fit use. Sources retained: 90368803.pdf. Related-model record: RF170WDLUX5N.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Adjoining-wall clearance (reviewed endpoint)

Not found for safe fit use. Sources retained: 90368803.pdf. Related-model record: RF170WDLUX5N.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Source documents and pages

Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN

assets.skulytics.io · Installation Guide Refrigerator Freezer EN · Scope not established

Model numbers covered: RF170WDLUX5N. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

10 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Minimum cutout width; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

Fisher Paykel RF170WDRUX5N User Guide

assets.skulytics.io · User Guide · equivalent model/source

Model numbers covered: RF170WDRUX5N. Publication/revision date: Not recorded. Reviewed: 2026-09-05.

2 displayed measurements supported: Minimum cutout height; Top clearance.

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

Fisher Paykel RF170WDRUX5N Quick Reference guide

assets.skulytics.io · Quick Reference guide · equivalent model/source

Model numbers covered: RF170WDRUX5N. Publication/revision date: Not recorded. Reviewed: 2026-09-05.

4 displayed measurements supported: Minimum cutout depth; Left-side ventilation clearance; Right-side ventilation clearance; Rear clearance.

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

Fisher Paykel RF170WDRJX5 User Guide

assets.skulytics.io · User Guide · Scope not established

Model numbers covered: RF170WDRJX5. Publication/revision date: Not recorded. Reviewed: 2026-09-05.

1 displayed measurements supported: Hinge-side wall clearance.

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

Report a problem with this model Check whether RF170WDRX5N fits your opening Back to Fisher and Paykel RF170WDRX5N Read the full verification methodology

Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.

Evidence summary

Incomplete evidence

Measurements and supporting evidence

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from RF170WDRUX5N applies

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from RF170WDRUX5N applies

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from RF170WDRUX5N applies

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from RF170WDRUX5N applies

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used