Measurement evidence for Fisher and Paykel RF170ADUSX4N

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN
assets.skulytics.io · Installation Guide Refrigerator Freezer EN
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 9
Reviewed: 2026-09-04

Reviewed manufacturer dimensions for RF170ADUSX4N: width_doors_closed_in = 31.125 in

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 31.125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN
assets.skulytics.io · Installation Guide Refrigerator Freezer EN
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 9
Reviewed: 2026-09-04

Reviewed manufacturer dimensions for RF170ADUSX4N: height_case_in = 67.75 in

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 67.75 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN
assets.skulytics.io · Installation Guide Refrigerator Freezer EN
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 9
Reviewed: 2026-09-04

Reviewed manufacturer dimensions for RF170ADUSX4N: height_hinge_in = 67.75 in

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 67.75 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN
assets.skulytics.io · Installation Guide Refrigerator Freezer EN
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 9
Reviewed: 2026-09-04

Reviewed manufacturer dimensions for RF170ADUSX4N: depth_case_only_in = 24.625 in

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 24.625 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 24.4375 in — superseded

  https://www.ajmadison.com/cgi-bin/ajmadison/RF170ADUSX4N.html; location not retained. Model scope: not separately recorded. Raw value: Depth without Door = 24.4375 in | N 31 Inch Counter Depth ... Dimensions. Width: 31 1/8 Inch. Depth: 27 3/8 Inch. Depth without Door and Handles: 24 7/16 Inch. Depth without Handles: 27 3/8 Inch. Height: 67 3/4 Inch. | independent cached support: ajmadison.com, designerappliances.com. The final reviewed registry supersedes this earlier audit value. Reviewed manufacturer dimensions for RF170ADUSX4N: depth_case_only_in = 24.625 in

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN
assets.skulytics.io · Installation Guide Refrigerator Freezer EN
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 9
Reviewed: 2026-09-04

Reviewed manufacturer dimensions for RF170ADUSX4N: depth_less_handles_in = 27.375 in

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 27.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN
assets.skulytics.io · Installation Guide Refrigerator Freezer EN
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 9
Reviewed: 2026-09-04

Reviewed manufacturer dimensions for RF170ADUSX4N: depth_with_handles_in = 29 in

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 29 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 27.375 in — superseded

  https://www.ajmadison.com/cgi-bin/ajmadison/RF170ADUSX4N.html; location not retained. Model scope: not separately recorded. Raw value: Plain exact-model specification row: Depth = 27.375 in | Fisher & Paykel RF170ADUSX4N 31 Inch Counter Depth ... Dimensions. Width: 31 1/8 Inch. Depth: 27 3/8 Inch. Depth without Door and Handles: 24 7/16 Inch. Depth without Handles: 27 3/8 Inch. Height: 67 3/4 Inch. . The final reviewed registry supersedes this earlier audit value. Reviewed manufacturer dimensions for RF170ADUSX4N: depth_with_handles_in = 29 in

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN
assets.skulytics.io · Installation Guide Refrigerator Freezer EN
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 9
Reviewed: 2026-09-04

Reviewed manufacturer dimensions for RF170ADUSX4N: depth_doors_open_90_in = 40.9375 in

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 40.9375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN
assets.skulytics.io · Installation Guide Refrigerator Freezer EN
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 9
Reviewed: 2026-09-04

Reviewed manufacturer dimensions for RF170ADUSX4N: min_cutout_width_in = 32.6875 in

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 32.6875 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Fisher Paykel RF170ADUSX4N User Guide
assets.skulytics.io · User Guide
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 13
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 67.75 in plus documented top clearance 2.0 in.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 69.75 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Fisher Paykel RF170ADUSX4N Quick Reference guide
assets.skulytics.io · Quick Reference guide
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 24.625 in plus documented rear clearance 1.188 in.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 25.813 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.188 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Fisher Paykel RF170ADUSX4N Quick Reference guide
assets.skulytics.io · Quick Reference guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum air clearance - each | 1 3/16" | Width

Why this value was used

Minimum air clearance - each | 1 3/16" | Width

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.188 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Fisher Paykel RF170ADUSX4N Quick Reference guide
assets.skulytics.io · Quick Reference guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum air clearance - each | 1 3/16" | Width

Why this value was used

Minimum air clearance - each | 1 3/16" | Width

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Fisher Paykel RF170ADUSX4N User Guide
assets.skulytics.io · User Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 13
Reviewed: 2026-09-05

P Top clearance — above refrigerator cabinet | 2" (50) | 2" (50)

Why this value was used

P Top clearance — above refrigerator cabinet | 2" (50) | 2" (50)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.188 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Fisher Paykel RF170ADUSX4N Quick Reference guide
assets.skulytics.io · Quick Reference guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum air clearance - at rear | 1 3/16" | Minimum air clearance - each

Why this value was used

Minimum air clearance - at rear | 1 3/16" | Minimum air clearance - each

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.562 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Fisher Paykel RF170ADUSX4N User Guide
assets.skulytics.io · User Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 13
Reviewed: 2026-09-05

M Side clearance — hinge side flush with door — 90° rotation | 3 9/16" (90) | 3 9/16" (90)

Why this value was used

M Side clearance — hinge side flush with door — 90° rotation | 3 9/16" (90) | 3 9/16" (90)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN
assets.skulytics.io · Installation Guide Refrigerator Freezer EN
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 9
Reviewed: 2026-09-04

Reviewed manufacturer dimensions for RF170ADUSX4N: case_width_in = 31.125 in

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 31.125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Fisher Paykel RF170WDLUX5N Installation Guide Refrigerator Freezer EN
assets.skulytics.io · Installation Guide Refrigerator Freezer EN
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 9
Reviewed: 2026-09-04

Reviewed manufacturer dimensions for RF170ADUSX4N: side_clearance_wall_in = 3.5625 in

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 3.5625 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 0.812 in — superseded

  82594897.pdf; page 13. Model scope: not separately recorded. Raw value: K Side clearance: 0.812 in | K Side clearance | 13/16" (20) | 13/16" (20). The final reviewed registry supersedes this earlier audit value. Reviewed manufacturer dimensions for RF170ADUSX4N: side_clearance_wall_in = 3.5625 in

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.