Measurement evidence for Cafe CYE22TP3MD1

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe CYE22TP2MS1 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Dimension H: Width 35 3/4 in. Dimension G (43 3/8 in.) is depth with fresh-food door open 90 degrees.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 35.75 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 43.375 in — superseded

  104284105.pdf; page 2. Model scope: not separately recorded. Raw value: Width (in.) H -> 43-3/8. The final reviewed registry supersedes this earlier audit value. Dimension H: Width 35 3/4 in. Dimension G (43 3/8 in.) is depth with fresh-food door open 90 degrees.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe CYE22TP3MD1 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Height to top of case (in.) C -> 69

Why this value was used

Height to top of case (in.) C -> 69

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe CYE22TP3MD1 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Height to top of hinge (in.) B -> 70-1/2

Why this value was used

Height to top of hinge (in.) B -> 70-1/2

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe CYE22TP3MD1 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Case depth without door (in.) D -> 24-3/8

Why this value was used

Case depth without door (in.) D -> 24-3/8

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

30.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe CYE22TP3MD1 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Case depth less door handle (in.) E -> 30-1/4

Why this value was used

Case depth less door handle (in.) E -> 30-1/4

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

31.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe CYE22TP3MD1 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Case depth with door handle (in.) F -> 31-1/4

Why this value was used

Case depth with door handle (in.) F -> 31-1/4

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

43.38 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

CAFÉ™ ENERGY STAR® 22.1 Cu. Ft. Smart Counter-Depth French-Door Refrigerator with Hot Water Dispenser - CYE22TP3MD1 - Cafe Appliances
Cafe · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Without Door 24.375 in Depth with Door Open 90°: 43.38 in | TP3MD1 - French Door Refrigerators
Reviewed: 2026-09-04

Depth Without Door 24.375 in Depth with Door Open 90°: 43.38 in | TP3MD1 - French Door Refrigerators Shipping Weight 398 lb. Width 35.750 in Case Depth Without Door 24.375 in Depth with Door Open 90° 43.375 in Depth Without Handle 30.25. Overall Depth 31.25 in

Why this value was used

Depth Without Door 24.375 in Depth with Door Open 90°: 43.38 in | TP3MD1 - French Door Refrigerators Shipping Weight 398 lb. Width 35.750 in Case Depth Without Door 24.375 in Depth with Door Open 90° 43.375 in Depth Without Handle 30.25. Overall Depth 31.25 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * exact/family installation side clearance

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

Cafe measurement source — Cafe exact-family installation manuals cached in Tavily advanced results
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-family installation instructions: opening W must not be less than 36 in; 1/8 in side air clear
Reviewed: 2026-09-04

Exact-family installation instructions: opening W must not be less than 36 in; 1/8 in side air clearance. Replaces door-swing wall clearance.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 36 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

71.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

CAFÉ™ ENERGY STAR® 22.1 Cu. Ft. Smart Counter-Depth French-Door Refrigerator with Hot Water Dispenser - CYE22TP3MD1 - Cafe Appliances
Cafe · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 70.5 in plus documented top clearance
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 70.5 in plus documented top clearance 1.0 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 70.5 in plus documented top clearance 1.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Cafe CYE22TP2MS1 36 Inch Counter Depth French Door ...
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening depth derived from case-only depth 24.375 in plus propagated rear clearance 2.0 in.
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 24.375 in plus propagated rear clearance 2.0 in.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 26.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe measurement source — Cafe exact-family installation manuals cached in Tavily advanced results
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Corrected prior value 13.125 in (Min distance between side of case and wall, in either direction, to
Reviewed: 2026-09-05

Corrected prior value 13.125 in (Min distance between side of case and wall, in either direction, to allow doors to open fully (in.) K -> 13-1/8). Exact-family installation instructions: opening W must not be less than 36 in; 1/8 in side air clearance. Replaces door-swing wall clearance.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe measurement source — Cafe exact-family installation manuals cached in Tavily advanced results
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Corrected prior value 13.125 in (Min distance between side of case and wall, in either direction, to
Reviewed: 2026-09-05

Corrected prior value 13.125 in (Min distance between side of case and wall, in either direction, to allow doors to open fully (in.) K -> 13-1/8). Exact-family installation instructions: opening W must not be less than 36 in; 1/8 in side air clearance. Replaces door-swing wall clearance.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

CAFÉ™ ENERGY STAR® 22.1 Cu. Ft. Smart Counter-Depth French-Door Refrigerator with Hot Water Dispenser - CYE22TP3MD1 - Cafe Appliances
Cafe · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Top Air Clearances, 1 in
Reviewed: 2026-09-05

Top Air Clearances, 1 in

Why this value was used

Top Air Clearances, 1 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Cafe CYE22TP2MS1

Confidence label: medium.

Primary evidence

Cafe CYE22TP2MS1 36 Inch Counter Depth French Door ...
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to Cafe CYE22TP2MS1; original evidenc
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Cafe CYE22TP2MS1; original evidence: Back: 2 In

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 2 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

13.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe CYE22TP3MD1 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Exact-model Cafe dimension table: minimum distance between side of case and wall, in either direction, to allow doors to open fully = 13 1/8".

Why this value was used

Exact-model Cafe dimension table: minimum distance between side of case and wall, in either direction, to allow doors to open fully = 13 1/8".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.75 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

CAFÉ™ ENERGY STAR® 22.1 Cu. Ft. Smart Counter-Depth French-Door Refrigerator with Hot Water Dispenser - CYE22TP3MD1 - Cafe Appliances
Cafe · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width = 35.75 in | --- | | Approximate Shipping Weight | 398 lb | | Back Air Clearances | 2
Reviewed: 2026-09-04

Cabinet Width = 35.75 in | --- | | Approximate Shipping Weight | 398 lb | | Back Air Clearances | 2 in | | Cabinet Width | 35.750 in | | Case Depth Without Door | 24.375 in | | Depth with Door Open 90° | 43.375 i

Why this value was used

Cabinet Width = 35.75 in | --- | | Approximate Shipping Weight | 398 lb | | Back Air Clearances | 2 in | | Cabinet Width | 35.750 in | | Case Depth Without Door | 24.375 in | | Depth with Door Open 90° | 43.375 i

Other evidence found

• 43.375 in — superseded

  104284105.pdf; page 2. Model scope: not separately recorded. Raw value: Width (in.) H -> 43-3/8. The final reviewed registry supersedes this earlier audit value. Cabinet Width = 35.75 in | --- | | Approximate Shipping Weight | 398 lb | | Back Air Clearances | 2 in | | Cabinet Width | 35.750 in | | Case Depth Without Door | 24.375 in | | Depth with Door Open 90° | 43.375 i

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Cafe measurement source — Cafe exact-family installation manuals cached in Tavily advanced results
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Corrected prior value 13.125 in (Min distance between side of case and wall, in either direction, to
Reviewed: 2026-09-04

Corrected prior value 13.125 in (Min distance between side of case and wall, in either direction, to allow doors to open fully (in.) K -> 13-1/8). Exact-family installation instructions: opening W must not be less than 36 in; 1/8 in side air clearance. Replaces door-swing wall clearance.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 13.125 in — superseded

  104284105.pdf (p.1); page 1. Model scope: not separately recorded. Raw value: Min distance between side of case and wall, in either direction, to allow doors to open fully (in.) K -> 13-1/8. The final reviewed registry supersedes this earlier audit value. Corrected prior value 13.125 in (Min distance between side of case and wall, in either direction, to allow doors to open fully (in.) K -> 13-1/8). Exact-family installation instructions: opening W must not be less than 36 in; 1/8 in side air clearance. Replaces door-swing wall clearance.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.