Measurement evidence for Cafe CXE22DP2PS1

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Cafe CXE22DP2PS1 fit check Check this model against your opening How ExactFit verifies measurements

Cafe CXE22DP2PS1

Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Incomplete evidence

0exact-model manufacturer values

2verified equivalent/same-chassis values

9secondary-source-only values

5values with unresolved source details

Last reviewed: 2026-09-05. 7 retained source records. 0 unresolved conflicts. Not every fit-critical input is supported.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

ExactFit does not have sufficient evidence for every fit-critical measurement. The fit checker will return Uncertain unless a known measurement already proves that the model does not fit.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	35.625 in	✓ Secondary source only	CAFÉ™ ENERGY STAR® 22.3 Cu. Ft. Smart Counter- ... www.foucaults.com	Retained specification excerpt: Plain exact-model specification row: Width = 35.625 in \| CAFÉ™ ENERGY STAR® 22.3 Cu. Ft. Smart Count
Value used by ExactFit 35.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence CAFÉ™ ENERGY STAR® 22.3 Cu. Ft. Smart Counter- ... www.foucaults.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Plain exact-model specification row: Width = 35.625 in \| CAFÉ™ ENERGY STAR® 22.3 Cu. Ft. Smart Count Reviewed: 2026-09-04 Plain exact-model specification row: Width = 35.625 in \| CAFÉ™ ENERGY STAR® 22.3 Cu. Ft. Smart Counter- ... Cafe CXE22DP2PS1 Features. Width: 35 5/8" Height: 69 7/8" Depth: 31 1/4" Energy Star Rated: Yes Refrigerator Size: 22.3 (cu. ft.) Fresh Food Capacity: 15.6. Open original source ↗ Why this value was used Plain exact-model specification row: Width = 35.625 in \| CAFÉ™ ENERGY STAR® 22.3 Cu. Ft. Smart Counter- ... Cafe CXE22DP2PS1 Features. Width: 35 5/8" Height: 69 7/8" Depth: 31 1/4" Energy Star Rated: Yes Refrigerator Size: 22.3 (cu. ft.) Fresh Food Capacity: 15.6. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	68.625 in	✓ Secondary source only	Cafe CXE22DP2PS1 Quick Specs assets.skulytics.io	Page 2
Value used by ExactFit 68.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Cafe CXE22DP2PS1 Quick Specs assets.skulytics.io · Quick Specs Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04 C - Height to top of case (in) -> 68 5/8 Open original source ↗ Why this value was used C - Height to top of case (in) -> 68 5/8 Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	69.75 in	✓ Secondary source only	Cafe CXE22DP2PS1 Quick Specs assets.skulytics.io	Page 2
Value used by ExactFit 69.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Cafe CXE22DP2PS1 Quick Specs assets.skulytics.io · Quick Specs Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04 B - Height to top of hinge cover (in) -> 69 3/4 Open original source ↗ Why this value was used B - Height to top of hinge cover (in) -> 69 3/4 Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	24 in	✓ Conflicting sources — resolved	Cafe CXE22DP4PW2 Quick Specs assets.skulytics.io	Page 2
Value used by ExactFit 24 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Cafe CXE22DP4PW2 Quick Specs assets.skulytics.io · Quick Specs Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Exact shared CXE22 table: Case Depth Without Door 24"; 28 7/8" is overall depth, not case-only. Open original source ↗ Why this value was used Exact shared CXE22 table: Case Depth Without Door 24"; 28 7/8" is overall depth, not case-only. Why evidence from CXE22DP4PW2 applies Target model: CXE22DP2PS1. Supporting model: CXE22DP4PW2. Manufacturer: Cafe. Product family and measurement relationship: Exact shared CXE22 table: Case Depth Without Door 24"; 28 7/8" is overall depth, not case-only.. Measurement transferred: Depth without door. Relevant equivalence evidence: Exact shared CXE22 table: Case Depth Without Door 24"; 28 7/8" is overall depth, not case-only.. Known differences: not separately recorded. Review decision: cached exact chassis dimension correction; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found 28.875 in — superseded 104287089.pdf; page 2. Model scope: not separately recorded. Raw value: F - Case Depth without Door Handle (in) -> 28 7/8. The final reviewed registry supersedes this earlier audit value. Exact shared CXE22 table: Case Depth Without Door 24"; 28 7/8" is overall depth, not case-only. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	Unknown	? Not found · Calculated/inferred	Cafe CXE22DP3PD1 36 Inch Counter Depth 4-Door ... www.ajmadison.com	Retained specification excerpt: Medium-confidence chassis inference from CXE22DP3PD1, CXE22DP4PW2. Donors unanimously report depth_l
Value used by ExactFit Unknown · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from CXE22DP3PD1, CXE22DP4PW2 Confidence label: medium. Primary evidence Cafe CXE22DP3PD1 36 Inch Counter Depth 4-Door ... www.ajmadison.com · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Medium-confidence chassis inference from CXE22DP3PD1, CXE22DP4PW2. Donors unanimously report depth_l Reviewed: 2026-09-04 Medium-confidence chassis inference from CXE22DP3PD1, CXE22DP4PW2. Donors unanimously report depth_less_handles_in=28.875 in; at least four direct chassis dimensions match and none conflict. Matching fields: width_doors_closed_in, height_case_in, height_hinge_in, depth_case_only_in. Donor evidence: Depth without Handles = 28.875 in \| sions. Width: 35 5/8 Inch. Depth: 31 1/4 Inch. Depth without Door: 24 1/2 Inch. Depth without Handles: 28 7/8 Inch. Depth with Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 28.875 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	Unknown	? Not found · Calculated/inferred	Cafe CXE22DP3PD1 36 Inch Counter Depth 4-Door ... www.ajmadison.com	Retained specification excerpt: Medium-confidence chassis inference from CXE22DP3PD1, CXE22DP4PW2. Donors unanimously report depth_w
Value used by ExactFit Unknown · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: same-brand product-class chassis propagation from CXE22DP3PD1, CXE22DP4PW2 Confidence label: medium. Primary evidence Cafe CXE22DP3PD1 36 Inch Counter Depth 4-Door ... www.ajmadison.com · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Medium-confidence chassis inference from CXE22DP3PD1, CXE22DP4PW2. Donors unanimously report depth_w Reviewed: 2026-09-04 Medium-confidence chassis inference from CXE22DP3PD1, CXE22DP4PW2. Donors unanimously report depth_with_handles_in=31.25 in; at least four direct chassis dimensions match and none conflict. Matching fields: width_doors_closed_in, height_case_in, height_hinge_in, depth_case_only_in. Donor evidence: Plain exact-model specification row: Depth = 31.25 in \| 2DP3PD1 36 Inch Counter Depth 4-Door ... Total Capacity: 22.3 Cu. Ft. Dimensions. Width: 35 5/8 Inch. Depth: 31 1/4 Inch. Depth without Door: 24 1/2 Inch. Depth without Handles: 28 7/8 Inch. Depth with Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 31.25 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	43 in	✓ Secondary source only	Cafe CXE22DP2PS1 Quick Specs assets.skulytics.io	Page 2
Value used by ExactFit 43 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Cafe CXE22DP2PS1 Quick Specs assets.skulytics.io · Quick Specs Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04 G - Depth with Door open 90 deg (in) -> 43 Open original source ↗ Why this value was used G - Depth with Door open 90 deg (in) -> 43 Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	35.875 in	✓ Secondary source only · Calculated/inferred	Cafe CXE22DP2PS1 Quick Specs www.foucaults.com	Page 1
Value used by ExactFit 35.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: 35.625 + 2 * 0.125 Confidence label: medium. Primary evidence Cafe CXE22DP2PS1 Quick Specs www.foucaults.com · Quick Specs Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Minimum opening derived from exact product width plus explicit symmetric side spacing: 35.625 + 2 * 0.125 = 35.875 in. Side evidence: Side Air Clearances = 1/8 in. Open original source ↗ Why this value was used Minimum opening derived from exact product width plus explicit symmetric side spacing: 35.625 + 2 * 0.125 = 35.875 in. Side evidence: Side Air Clearances = 1/8 in. Calculation or inference: 35.625 + 2 * 0.125. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	70.75 in	✓ Secondary source only · Calculated/inferred	Cafe measurement source — https://www.shoreappliances.com/Cafe-CXE22DP2PS1-CAF-ENERGY-STAR-22-3-Cu-Ft-Smart-Counter-Depth-4-Door-French-Door-Refrigerator www.shoreappliances.com	Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 69.75 in plus documented top clearanc
Value used by ExactFit 70.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence Cafe measurement source — https://www.shoreappliances.com/Cafe-CXE22DP2PS1-CAF-ENERGY-STAR-22-3-Cu-Ft-Smart-Counter-Depth-4-Door-French-Door-Refrigerator www.shoreappliances.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 69.75 in plus documented top clearanc Reviewed: 2026-09-05 Minimum opening height derived from highest appliance endpoint 69.75 in plus documented top clearance 1.0 in. Open original source ↗ Why this value was used Minimum opening height derived from highest appliance endpoint 69.75 in plus documented top clearance 1.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	Unknown	? Not found · Calculated/inferred	Cafe CXE22DP4PW2 Quick Specs assets.skulytics.io	Page 2
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence Cafe CXE22DP4PW2 Quick Specs assets.skulytics.io · Quick Specs Model scope: Not established Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Corrected opening envelope: 24" case-only depth + 2" rear clearance = 26". Open original source ↗ Why this value was used A required calculation input lacks defensible evidence. Retained research value: 26 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	0.125 in	✓ Secondary source only	Cafe CXE22DP2PS1 Quick Specs assets.skulytics.io	Page 1
Value used by ExactFit 0.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Cafe CXE22DP2PS1 Quick Specs assets.skulytics.io · Quick Specs Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05 Side Air Clearances = 1/8 in. Open original source ↗ Why this value was used Side Air Clearances = 1/8 in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	0.125 in	✓ Secondary source only	Cafe CXE22DP2PS1 Quick Specs assets.skulytics.io	Page 1
Value used by ExactFit 0.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Cafe CXE22DP2PS1 Quick Specs assets.skulytics.io · Quick Specs Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05 Side Air Clearances = 1/8 in. Open original source ↗ Why this value was used Side Air Clearances = 1/8 in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	1 in	✓ Secondary source only	Cafe measurement source — https://www.shoreappliances.com/Cafe-CXE22DP2PS1-CAF-ENERGY-STAR-22-3-Cu-Ft-Smart-Counter-Depth-4-Door-French-Door-Refrigerator www.shoreappliances.com	Retained specification excerpt: Top Air Clearances, 1 in
Value used by ExactFit 1 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Cafe measurement source — https://www.shoreappliances.com/Cafe-CXE22DP2PS1-CAF-ENERGY-STAR-22-3-Cu-Ft-Smart-Counter-Depth-4-Door-French-Door-Refrigerator www.shoreappliances.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Top Air Clearances, 1 in Reviewed: 2026-09-05 Top Air Clearances, 1 in Open original source ↗ Why this value was used Top Air Clearances, 1 in Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	Unknown	? Not found · Calculated/inferred	GE Profile™ ENERGY STAR® 22.4 Cu. Ft. Smart Counter-Depth 4-Door ... www.olums.com	Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to GE_Profile PXD22HYYFS; original ev
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model GE_Profile PXD22HYYFS Confidence label: medium. Primary evidence GE Profile™ ENERGY STAR® 22.4 Cu. Ft. Smart Counter-Depth 4-Door ... www.olums.com · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to GE_Profile PXD22HYYFS; original ev Reviewed: 2026-09-05 Conflict-free corporate-family exact 8-dimension chassis match to GE_Profile PXD22HYYFS; original evidence: Back Air Clearances \| 2 in Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 2 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	4.625 in	✓ Verified — equivalent model · Calculated/inferred	Cafe CXE22DP4PW2 Quick Specs assets.skulytics.io	Page 2
Value used by ExactFit 4.625 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: ceil_to_1/8((width_open_90 - max(case_width,width_closed)) / 2) Confidence label: medium. Primary evidence Cafe CXE22DP4PW2 Quick Specs assets.skulytics.io · Quick Specs Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Cafe shared chassis width-open geometry: width open 90 degrees 44.875 in; closed width 35.625 in; dual-door per-side half-excess rounded upward to 1/8 in = 4.625 in. Open original source ↗ Why this value was used Cafe shared chassis width-open geometry: width open 90 degrees 44.875 in; closed width 35.625 in; dual-door per-side half-excess rounded upward to 1/8 in = 4.625 in. Calculation or inference: ceil_to_1/8((width_open_90 - max(case_width,width_closed)) / 2). Why evidence from CXE22DP4PW2 applies Target model: CXE22DP2PS1. Supporting model: CXE22DP4PW2. Manufacturer: Cafe. Product family and measurement relationship: ceil_to_1/8((width_open_90 - max(case_width,width_closed)) / 2). Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: Cafe shared chassis width-open geometry: width open 90 degrees 44.875 in; closed width 35.625 in; dual-door per-side half-excess rounded upward to 1/8 in = 4.625 in.. Known differences: not separately recorded. Review decision: documented shared chassis 90deg width envelope formula; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	Unknown	? Not found · Calculated/inferred	CAFÉ™ ENERGY STAR® 22.3 Cu. Ft. Smart Counter- ... www.foucaults.com	Retained specification excerpt: Low-confidence same-appliance width mapping: case_width_in=35.625 in from width_doors_closed_in.
Value used by ExactFit Unknown · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: case_width_in mapped from populated width_doors_closed_in; doors do not materially change closed product width Confidence label: low. Primary evidence CAFÉ™ ENERGY STAR® 22.3 Cu. Ft. Smart Counter- ... www.foucaults.com · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Low-confidence same-appliance width mapping: case_width_in=35.625 in from width_doors_closed_in. Reviewed: 2026-09-04 Low-confidence same-appliance width mapping: case_width_in=35.625 in from width_doors_closed_in. Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 35.625 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	0.125 in	✓ Secondary source only	Cafe CXE22DP2PS1 Quick Specs assets.skulytics.io	Page 1
Value used by ExactFit 0.125 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Cafe CXE22DP2PS1 Quick Specs assets.skulytics.io · Quick Specs Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Side Air Clearances = 1/8 in. Open original source ↗ Why this value was used Side Air Clearances = 1/8 in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Depth without door

Selected: 24 in. Earlier retained values: 28.875 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Exact shared CXE22 table: Case Depth Without Door 24"; 28 7/8" is overall depth, not case-only.

View source scope, location, and impact on fit

Measurements not established

Depth with door, without handles

Not found for safe fit use. Sources retained: https://www.ajmadison.com/cgi-bin/ajmadison/CXE22DP3PD1.html. Related-model record: CXE22DP2PS1.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Depth with handle

Not found for safe fit use. Sources retained: https://www.ajmadison.com/cgi-bin/ajmadison/CXE22DP3PD1.html. Related-model record: CXE22DP2PS1.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Minimum cutout depth

Not found for safe fit use. Sources retained: 104287127.pdf. Related-model record: CXE22DP4PW2.

A required calculation input lacks defensible evidence.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Rear clearance

Not found for safe fit use. Sources retained: https://www.olums.com/products/GE-Appliances/ge/pxd22hyyfs.html. Related-model record: CXE22DP2PS1.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Cabinet case width

Not found for safe fit use. Sources retained: https://www.foucaults.com/products/Cafe/cafea/cxe22dp2ps1.html. Related-model record: CXE22DP2PS1.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Source documents and pages