This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)
Last reviewed: 2026-09-07. 4 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | 42 in | ✓ Secondary source only | Cafe CSB42YP2NS1 Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit42 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCafe CSB42YP2NS1 Quick Specs Overall Width 42 inOpen original source ↗ Why this value was usedOverall Width 42 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | 83.5 in | ✓ Secondary source only | Cafe CSB42YP2NS1 Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit83.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCafe CSB42YP2NS1 Quick Specs Height to Top of Case 83-1/2 inOpen original source ↗ Why this value was usedHeight to Top of Case 83-1/2 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 84 in | ✓ Secondary source only | Cafe CSB42YP2NS1 Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit84 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCafe CSB42YP2NS1 Quick Specs Overall Height 84 inOpen original source ↗ Why this value was usedOverall Height 84 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | 23.5 in | ✓ Secondary source only | Cafe CSB42YP2NS1 Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit23.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCafe CSB42YP2NS1 Quick Specs Case Depth Without Door 23-1/2 inOpen original source ↗ Why this value was usedCase Depth Without Door 23-1/2 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 25.75 in | ✓ Secondary source only | Cafe CSB42YP2NS1 Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit25.75 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCafe CSB42YP2NS1 Quick Specs Depth Without Handle 25-3/4 inOpen original source ↗ Why this value was usedDepth Without Handle 25-3/4 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 28.5 in | ✓ Conflicting sources — resolved | CAFÉ™ 42" Smart Built-In Side-by-Side Refrigerator with Dispenser - CSB42YP2NS1 - Cafe Appliances Cafe | Retained specification excerpt: Reviewed cached exact-model manufacturer label: Depth with Handle = 28.5 in. Context: f Hinge | 84 i | |
Value used by ExactFit28.5 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCAFÉ™ 42" Smart Built-In Side-by-Side Refrigerator with Dispenser - CSB42YP2NS1 - Cafe Appliances Reviewed cached exact-model manufacturer label: Depth with Handle = 28.5 in. Context: f Hinge | 84 in | | Net Weight | 688 lb | | Overall Depth | 28.5 in | | Overall Depth with Handle | 28.5 in | | Overall Height | 84 in | | Overall Width | 42 in | | Width w/Door Open 90 DOpen original source ↗ Why this value was usedReviewed cached exact-model manufacturer label: Depth with Handle = 28.5 in. Context: f Hinge | 84 in | | Net Weight | 688 lb | | Overall Depth | 28.5 in | | Overall Depth with Handle | 28.5 in | | Overall Height | 84 in | | Overall Width | 42 in | | Width w/Door Open 90 D Other evidence found
Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 50.25 in | ✓ Secondary source only | Cafe CSB42YP2NS1 Quick Specs assets.skulytics.io | Page 1 | |
Value used by ExactFit50.25 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCafe CSB42YP2NS1 Quick Specs Depth with Fresh Food Door Open 90° = 50-1/4 in.Open original source ↗ Why this value was usedDepth with Fresh Food Door Open 90° = 50-1/4 in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | 41.5 in | ✓ Secondary source only | Cafe CSB42YP2NS1 Use and Care Manual assets.skulytics.io | Page 25 | |
Value used by ExactFit41.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCafe CSB42YP2NS1 Use and Care Manual Finished cutout width must be 41-1/2" for 42" models.Open original source ↗ Why this value was usedFinished cutout width must be 41-1/2" for 42" models. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | 84.5 in | ✓ Secondary source only | Cafe CSB42YP2NS1 Quick Specs assets.skulytics.io | Page 3 | |
Value used by ExactFit84.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCafe CSB42YP2NS1 Quick Specs Exact CSB installation diagram: finished opening height 84" + 1/2".Open original source ↗ Why this value was usedExact CSB installation diagram: finished opening height 84" + 1/2". Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | 24 in | ✓ Secondary source only | Cafe CSB42YP2NS1 Quick Specs assets.skulytics.io | Page 3 | |
Value used by ExactFit24 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCafe CSB42YP2NS1 Quick Specs located as shown. | THE CUTOUT DEPTH MUST BE 24" | The refrigerator will project forward, slightly beyond adjacentOpen original source ↗ Why this value was usedlocated as shown. | THE CUTOUT DEPTH MUST BE 24" | The refrigerator will project forward, slightly beyond adjacent Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | Unknown | ? Not found | Cafe measurement source — local-cache manufacturer-family consensus Publisher not recorded | Retained specification excerpt: Inferred 0.125 in per-side installation clearance from dominant manufacturer-family specification pa | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCafe measurement source — local-cache manufacturer-family consensus Inferred 0.125 in per-side installation clearance from dominant manufacturer-family specification pattern. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedThe retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.125 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | Unknown | ? Not found | Cafe measurement source — local-cache manufacturer-family consensus Publisher not recorded | Retained specification excerpt: Inferred 0.125 in per-side installation clearance from dominant manufacturer-family specification pa | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCafe measurement source — local-cache manufacturer-family consensus Inferred 0.125 in per-side installation clearance from dominant manufacturer-family specification pattern. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedThe retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.125 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | 0.5 in | ✓ Secondary source only · Calculated/inferred | Cafe CSB42YP2NS1 Quick Specs assets.skulytics.io | Page 3 | |
Value used by ExactFit0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: min_cutout_height_in - height_hinge_in Confidence label: medium. Calculation inputs: Height with hinge / controlling height; Minimum cutout height; Primary evidenceCafe CSB42YP2NS1 Quick Specs Exact 84 1/2" finished opening less 84" height to top of grille = 1/2".Open original source ↗ Why this value was usedExact 84 1/2" finished opening less 84" height to top of grille = 1/2". Calculation or inference: min_cutout_height_in - height_hinge_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | 0.5 in | ✓ Secondary source only · Calculated/inferred | Cafe CSB42YP2NS1 Quick Specs assets.skulytics.io | Page 3 | |
Value used by ExactFit0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: min_cutout_depth_in - depth_case_only_in Confidence label: medium. Calculation inputs: Depth without door; Minimum cutout depth; Primary evidenceCafe CSB42YP2NS1 Quick Specs Exact 24" cutout depth less 23.5" case-only depth = 0.5" rear opening residual.Open original source ↗ Why this value was usedExact 24" cutout depth less 23.5" case-only depth = 0.5" rear opening residual. Calculation or inference: min_cutout_depth_in - depth_case_only_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Hinge-side wall clearance | 4.625 in | ✓ Secondary source only | Cafe CSB42YP2NS1 Quick Specs assets.skulytics.io | Page 2 | |
Value used by ExactFit4.625 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCafe CSB42YP2NS1 Quick Specs Exact CSB42 product-clearance table: 4 5/8" minimum at the 90-degree stop; full 130-degree clearances are 11 1/4" freezer / 17 5/8" fresh-food.Open original source ↗ Why this value was usedExact CSB42 product-clearance table: 4 5/8" minimum at the 90-degree stop; full 130-degree clearances are 11 1/4" freezer / 17 5/8" fresh-food. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | 41 in | ✓ Conflicting sources — resolved | Cafe CSB42YP2NS1 Use and Care Manual assets.skulytics.io | Page 25 | |
Value used by ExactFit41 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceCafe CSB42YP2NS1 Use and Care Manual Exact installation drawing: 41" Case Width; 42" is Frame to Frame.Open original source ↗ Why this value was usedExact installation drawing: 41" Case Width; 42" is Frame to Frame. Other evidence found
Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Adjoining-wall clearance (reviewed endpoint) | Unknown | ? Not found · Calculated/inferred | Cafe measurement source — local-cache manufacturer-family consensus Publisher not recorded | Retained specification excerpt: Inferred 0.125 in per-side installation clearance from dominant manufacturer-family specification pa | |
Value used by ExactFitUnknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Strong modal installation clearance for this manufacturer family Confidence label: low. Primary evidenceCafe measurement source — local-cache manufacturer-family consensus Inferred 0.125 in per-side installation clearance from dominant manufacturer-family specification pattern. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedA low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 0.125 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Selected: 28.5 in. Earlier retained values: 25.75 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Reviewed cached exact-model manufacturer label: Depth with Handle = 28.5 in. Context: f Hinge | 84 in | | Net Weight | 688 lb | | Overall Depth | 28.5 in | | Overall Depth with Handle | 28.5 in | | Overall Height | 84 in | | Overall Width | 42 in | | Width w/Door Open 90 D
View source scope, location, and impact on fitSelected: 41 in. Earlier retained values: 42 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Exact installation drawing: 41" Case Width; 42" is Frame to Frame.
View source scope, location, and impact on fitNot found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
assets.skulytics.io · Quick Specs · secondary model/source
Model numbers covered: CSB42YP2NS1. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
11 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with doors open at 90°; Minimum cutout height; Minimum cutout depth; Top clearance; Rear clearance; Hinge-side wall clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Cafe · Web source · exact model/source
Model numbers covered: CSB42YP2NS1. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
1 displayed measurements supported: Depth with handle.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Use and Care Manual · secondary model/source
Model numbers covered: CSB42YP2NS1. Publication/revision date: Not recorded. Reviewed: 2026-09-07.
2 displayed measurements supported: Minimum cutout width; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Publisher not recorded · Retained document · Scope not established
Model numbers covered: Not explicitly retained. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
3 displayed measurements supported: Left-side ventilation clearance; Right-side ventilation clearance; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL unavailable in the record.
Evidence reflects the sources reviewed on 2026-09-07. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.