Measurement evidence for Cafe CGE29DP4TW2

Value used by ExactFit

35.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe measurement source — cafe-refrigerator-CGE29DP-specification-sheet.pdf
content.abt.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Overall Width 35 5/8 in
Reviewed: 2026-09-04

Overall Width 35 5/8 in

Why this value was used

Overall Width 35 5/8 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe installation document — 104369904.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

C - Height to top of case (in) -> 68 5/8

Why this value was used

C - Height to top of case (in) -> 68 5/8

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe measurement source — 104369830.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-24

Height to top of door 69-7/8 in; the same table prints Height to top of hinge 69-3/4 and Height to top of case 68-5/8. The stored field holds the appliance's overall height for fit, so it takes the highest point, the top of the door (owner decision 2026-09-24).

Why this value was used

Height to top of door 69-7/8 in; the same table prints Height to top of hinge 69-3/4 and Height to top of case 68-5/8. The stored field holds the appliance's overall height for fit, so it takes the highest point, the top of the door (owner decision 2026-09-24).

Other evidence found

• 69.75 in — superseded

  Document 104369904.pdf; page 2. Model scope: not separately recorded. Raw value: B - Height to top of hinge cover (in) -> 69 3/4. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe measurement source — CAFE-ENERGY-STAR-28-7-Cu-Ft-Smart-4-Door-French-Door-Refrigerator-With-Dual-Dispense-AutoFill-Pitcher-CGE29DP4TW2
Cafe · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model page: Case Depth Without Door 29.5 in; Depth Without Handle is separately 34.25
Reviewed: 2026-09-04

Official exact-model page: Case Depth Without Door 29.5 in; Depth Without Handle is separately 34.25 in.

Why this value was used

Official exact-model page: Case Depth Without Door 29.5 in; Depth Without Handle is separately 34.25 in.

Other evidence found

• 34.25 in — superseded

  Document 104369904.pdf; page 2. Model scope: not separately recorded. Raw value: F - Case Depth without Door Handle (in) -> 34 1/4. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe measurement source — CAFE-ENERGY-STAR-28-7-Cu-Ft-Smart-4-Door-French-Door-Refrigerator-With-Dual-Dispense-AutoFill-Pitcher-CGE29DP4TW2
Cafe · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Without Handle: 34.25 in | .625 in. Case Depth Without Door, 29.5 in. Depth with Door Open 90°
Reviewed: 2026-09-04

Depth Without Handle: 34.25 in | .625 in. Case Depth Without Door, 29.5 in. Depth with Door Open 90°, 48.375 in. Depth Without Handle, 34.25 in. Exterior Height (Front), 69.875

Why this value was used

Depth Without Handle: 34.25 in | .625 in. Case Depth Without Door, 29.5 in. Depth with Door Open 90°, 48.375 in. Depth Without Handle, 34.25 in. Exterior Height (Front), 69.875

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe installation document — 104369904.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Overall depth = 36 3/4"

Why this value was used

Overall depth = 36 3/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

48.38 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe measurement source — CAFE-ENERGY-STAR-28-7-Cu-Ft-Smart-4-Door-French-Door-Refrigerator-With-Dual-Dispense-AutoFill-Pitcher-CGE29DP4TW2
Cafe · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Without Door, 29.5 in. Depth with Door Open 90°: 48.38 in | CAFÉ™ ENERGY STAR® 28.7 Cu. Ft. Sm
Reviewed: 2026-09-04

Depth Without Door, 29.5 in. Depth with Door Open 90°: 48.38 in | CAFÉ™ ENERGY STAR® 28.7 Cu. Ft. Smart 4-Door ... Cabinet Width, 24.625 in. Case Depth Without Door, 29.5 in. Depth with Door Open 90°, 48.375 in. Depth Without Handle, 34.25 in. Exterior Height (Front), 69.875

Why this value was used

Depth Without Door, 29.5 in. Depth with Door Open 90°: 48.38 in | CAFÉ™ ENERGY STAR® 28.7 Cu. Ft. Smart 4-Door ... Cabinet Width, 24.625 in. Case Depth Without Door, 29.5 in. Depth with Door Open 90°, 48.375 in. Depth Without Handle, 34.25 in. Exterior Height (Front), 69.875

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * side_ventilation_clearance_in = 35.875

Confidence label: high.

Calculation inputs: Overall width; Left-side ventilation clearance;

Primary evidence

Cafe measurement source — cafe-refrigerator-CGE29DP-specification-sheet.pdf
content.abt.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed appliance width plus reviewed per-side installation clearance; width_doors_closed_in + 2 *
Reviewed: 2026-09-18

Reviewed appliance width plus reviewed per-side installation clearance; width_doors_closed_in + 2 * side_clearance_wall_in = 35.875 in | Formula text updated 2026-09-18: the side gap it used was the side ventilation clearance (side_clearance_wall_in was retired); the value is unchanged.

Why this value was used

Reviewed appliance width plus reviewed per-side installation clearance; width_doors_closed_in + 2 * side_clearance_wall_in = 35.875 in | Formula text updated 2026-09-18: the side gap it used was the side ventilation clearance (side_clearance_wall_in was retired); the value is unchanged. Calculation or inference: width_doors_closed_in + 2 * side_ventilation_clearance_in = 35.875.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(68.625, 69.75) + 1

Confidence label: high.

Primary evidence

Cafe measurement source — CGE29DP4TW2_104369904.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-10

Highest exact appliance-height endpoint plus the explicitly printed top air clearance.

Why this value was used

Highest exact appliance-height endpoint plus the explicitly printed top air clearance. Calculation or inference: max(68.625, 69.75) + 1.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 29.5 + 2

Confidence label: high.

Primary evidence

Cafe measurement source — CGE29DP4TW2_104369904.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-10

Exact case depth without door plus the explicitly printed back air clearance.

Why this value was used

Exact case depth without door plus the explicitly printed back air clearance. Calculation or inference: 29.5 + 2.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe measurement source — 104369904.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Side air clearances = .125 in.

Why this value was used

Side air clearances = .125 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe measurement source — 104369904.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Side air clearances = .125 in.

Why this value was used

Side air clearances = .125 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe measurement source — CGE29DP4TW2_104369904.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-10

Exact retained Café Quick Specs page 1 directly prints Top Air Clearance = 1 in.

Why this value was used

Exact retained Café Quick Specs page 1 directly prints Top Air Clearance = 1 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe measurement source — CGE29DP4TW2_104369904.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-10

Exact retained Café Quick Specs page 1 directly prints Back Air Clearance = 2 in.

Why this value was used

Exact retained Café Quick Specs page 1 directly prints Back Air Clearance = 2 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

4.625 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: (44.875 - 35.625) / 2

Confidence label: high.

Primary evidence

Cafe measurement source — CGE29DP4TW2_104369904.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (90 degrees). Exact-model Cafe specification visually prints width with symmetric doors open 90 degrees including handles as 44.875 in and closed case width as 35.625 in; exact per-side operating envelope is (44.875 - 35.625) / 2 = 4.625 in.

Why this value was used

Migrated from hinge_side_wall_clearance_in (90 degrees). Exact-model Cafe specification visually prints width with symmetric doors open 90 degrees including handles as 44.875 in and closed case width as 35.625 in; exact per-side operating envelope is (44.875 - 35.625) / 2 = 4.625 in. Calculation or inference: (44.875 - 35.625) / 2.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe measurement source — CGE29DP4TW2_104369904.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-10

Exact retained Café Quick Specs page 1 directly prints Case Width / Overall Width = 35 5/8 in.

Why this value was used

Exact retained Café Quick Specs page 1 directly prints Case Width / Overall Width = 35 5/8 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.