Measurement evidence for Cafe CGE29DP2TS1

Value used by ExactFit

35.63 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

CGE29DP2TS1 Café Refrigerators
www.mysouthernhomefurnishings.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Width = 35.63 in | efrigerator (CGE29DP2TS1) ; Sabbath Mode, Ye
Reviewed: 2026-09-04

Plain exact-model specification row: Width = 35.63 in | efrigerator (CGE29DP2TS1) ; Sabbath Mode, Yes ; Class Width, 35" to 37.9" ; Class Height, 65" - 70" ; Width, 35.63 inch(es).

Why this value was used

Plain exact-model specification row: Width = 35.63 in | efrigerator (CGE29DP2TS1) ; Sabbath Mode, Yes ; Class Width, 35" to 37.9" ; Class Height, 65" - 70" ; Width, 35.63 inch(es).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe CGE29DP2TS1 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

C - Height to top of case (in) -> 68 5/8

Why this value was used

C - Height to top of case (in) -> 68 5/8

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe CGE29DP2TS1 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

B - Height to top of hinge cover (in) -> 69 3/4

Why this value was used

B - Height to top of hinge cover (in) -> 69 3/4

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

CAFÉ™ ENERGY STAR® 28.7 Cu. Ft. Smart 4-Door French-Door Refrigerator With Dual-Dispense AutoFill Pitcher - CGE29DP2TS1 - Cafe Appliances
Cafe · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model page: Case Depth Without Door 29.5 in; Depth Without Handle is separately 34.25
Reviewed: 2026-09-04

Official exact-model page: Case Depth Without Door 29.5 in; Depth Without Handle is separately 34.25 in.

Why this value was used

Official exact-model page: Case Depth Without Door 29.5 in; Depth Without Handle is separately 34.25 in.

Other evidence found

• 34.25 in — superseded

  104369830.pdf; page 2. Model scope: not separately recorded. Raw value: F - Case Depth without Door Handle (in) -> 34 1/4. The final reviewed registry supersedes this earlier audit value. Official exact-model page: Case Depth Without Door 29.5 in; Depth Without Handle is separately 34.25 in.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34.25 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

CAFÉ™ ENERGY STAR® 28.7 Cu. Ft. Smart 4-Door French-Door Refrigerator With Dual-Dispense AutoFill Pitcher - CGE29DP2TS1 - Cafe Appliances
Cafe · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Without Handle: 34.25 in | .625 in. Case Depth Without Door, 29.5 in. Depth with Door Open 90°
Reviewed: 2026-09-04

Depth Without Handle: 34.25 in | .625 in. Case Depth Without Door, 29.5 in. Depth with Door Open 90°, 48.375 in. Depth Without Handle, 34.25 in. Exterior Height (Front), 69.875

Why this value was used

Depth Without Handle: 34.25 in | .625 in. Case Depth Without Door, 29.5 in. Depth with Door Open 90°, 48.375 in. Depth Without Handle, 34.25 in. Exterior Height (Front), 69.875

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe CGE29DP2TS1 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Overall depth = 36 3/4"

Why this value was used

Overall depth = 36 3/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

48.38 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

CAFÉ™ ENERGY STAR® 28.7 Cu. Ft. Smart 4-Door French-Door Refrigerator With Dual-Dispense AutoFill Pitcher - CGE29DP2TS1 - Cafe Appliances
Cafe · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Without Door, 29.5 in. Depth with Door Open 90°: 48.38 in | CAFÉ™ ENERGY STAR® 28.7 Cu. Ft. Sm
Reviewed: 2026-09-04

Depth Without Door, 29.5 in. Depth with Door Open 90°: 48.38 in | CAFÉ™ ENERGY STAR® 28.7 Cu. Ft. Smart 4-Door ... Cabinet Width, 24.625 in. Case Depth Without Door, 29.5 in. Depth with Door Open 90°, 48.375 in. Depth Without Handle, 34.25 in. Exterior Height (Front), 69.875

Why this value was used

Depth Without Door, 29.5 in. Depth with Door Open 90°: 48.38 in | CAFÉ™ ENERGY STAR® 28.7 Cu. Ft. Smart 4-Door ... Cabinet Width, 24.625 in. Case Depth Without Door, 29.5 in. Depth with Door Open 90°, 48.375 in. Depth Without Handle, 34.25 in. Exterior Height (Front), 69.875

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.88 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 35.63 + 2 * 0.125

Confidence label: medium.

Primary evidence

Cafe CGE29DP2TS1 Quick Specs
www.mysouthernhomefurnishings.com · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Minimum opening derived from exact product width plus explicit symmetric side spacing: 35.63 + 2 * 0.125 = 35.88 in. Side evidence: Side air clearances = .125 in.

Why this value was used

Minimum opening derived from exact product width plus explicit symmetric side spacing: 35.63 + 2 * 0.125 = 35.88 in. Side evidence: Side air clearances = .125 in. Calculation or inference: 35.63 + 2 * 0.125.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Cafe measurement source — https://content.abt.com/documents/158371/cafe-refrigerator-CGE29DP-specification-sheet.pdf
content.abt.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 69.75 in plus documented top clearance 1.0 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 69.75 in plus documented top clearance 1.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Cafe measurement source — https://content.abt.com/documents/158371/cafe-refrigerator-CGE29DP-specification-sheet.pdf
content.abt.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.5 in plus documented rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 29.5 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe CGE29DP2TS1 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Side air clearances = .125 in.

Why this value was used

Side air clearances = .125 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe CGE29DP2TS1 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Side air clearances = .125 in.

Why this value was used

Side air clearances = .125 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Cafe measurement source — https://content.abt.com/documents/158371/cafe-refrigerator-CGE29DP-specification-sheet.pdf
content.abt.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Top air clearance | 1 in. | Approximate shipping weight

Why this value was used

Top air clearance | 1 in. | Approximate shipping weight

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Cafe measurement source — https://content.abt.com/documents/158371/cafe-refrigerator-CGE29DP-specification-sheet.pdf
content.abt.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Back air clearance | 2 in. | Side air clearances

Why this value was used

Back air clearance | 2 in. | Side air clearances

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

4.625 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: ceil_to_1/8((width_open_90 - max(case_width,width_closed)) / 2)

Confidence label: medium.

Primary evidence

Cafe CGE29DP4TW2 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Cafe shared chassis width-open geometry: width open 90 degrees 44.875 in; closed width 35.63 in; dual-door per-side half-excess rounded upward to 1/8 in = 4.625 in.

Why this value was used

Cafe shared chassis width-open geometry: width open 90 degrees 44.875 in; closed width 35.63 in; dual-door per-side half-excess rounded upward to 1/8 in = 4.625 in. Calculation or inference: ceil_to_1/8((width_open_90 - max(case_width,width_closed)) / 2).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in mapped from populated width_doors_closed_in; doors do not materially change closed product width

Confidence label: low.

Primary evidence

CGE29DP2TS1 Café Refrigerators
www.mysouthernhomefurnishings.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Low-confidence same-appliance width mapping: case_width_in=35.63 in from width_doors_closed_in.
Reviewed: 2026-09-04

Low-confidence same-appliance width mapping: case_width_in=35.63 in from width_doors_closed_in.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 35.63 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

0.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Cafe CGE29DP2TS1 Quick Specs
assets.skulytics.io · Quick Specs
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Side air clearances = .125 in.

Why this value was used

Side air clearances = .125 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.