Measurement evidence for Bosch B36CD52SNS

Value used by ExactFit

35.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — 106159322.pdf
Bosch · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Exact Bosch closed front view prints overall width 35 5/8 in.

Why this value was used

Exact Bosch closed front view prints overall width 35 5/8 in.

Other evidence found

• 35.62 in — superseded

  media3.bosch-home.com; location not retained. Model scope: not separately recorded. Raw value: Overall width: 35.62 in | ator near a heat source such as a stove or a range. [...] Dimensions and Weight Overall width (inches) 35 5/8" Overall height (inches) 70" Overall depth with doors and handles (inches) 31 1/. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — B36CD52SNS-106159322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-10

Exact-model side elevation directly prints cabinet height 69 1/2 in.

Why this value was used

Exact-model side elevation directly prints cabinet height 69 1/2 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — 25844187_B36CD52SNB_Spec_Sheet.pdf
Bosch · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Overall height (inches) = 70" | Overall height (inches) | 70"* | Overall depth with doors

Why this value was used

Overall height (inches) = 70" | Overall height (inches) | 70"* | Overall depth with doors

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 24 in cabinet + 1 in fixed rear spacers

Confidence label: high.

Primary evidence

Bosch measurement source — B36CD52SNS-106159322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-17

Same drawing as B36CD52SNB (shared artwork): 24 in cabinet plus note B 'Add 1" (25) for fixed spacers on back'. Owner ruling 2026-09-16: this field includes fixed rear spacers.

Why this value was used

Same drawing as B36CD52SNB (shared artwork): 24 in cabinet plus note B 'Add 1" (25) for fixed spacers on back'. Owner ruling 2026-09-16: this field includes fixed rear spacers. Calculation or inference: 24 in cabinet + 1 in fixed rear spacers.

Other evidence found

• 24 in — superseded

  Document Bosch B36CD52 exact-model cached ABT specifications; location not retained. Model scope: not separately recorded. Raw value: Corrected prior value 25 in (h with doors and handles (inches) 31 1/8" Overall depth without doors and handles (inches) 25" Required cutout size (HxWxD) (inches) 70" x 36" x). Exact-model specification: Case Depth 24 in; replaces mis-mapped 25-inch cutout depth.. The final reviewed registry supersedes this earlier audit value.

• 24 in — superseded

  The same document as the value used above; page 2. Model scope: not separately recorded. Raw value: Detailed exact-model side elevation directly prints 24 in to the cabinet/less-door face; the separate 1-inch fixed rear spacer is not part of case-only depth.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — B36CD52SNS-106159322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-10

Detailed exact-model side elevation directly prints closed depth to the door face, excluding projecting handles, as 28 3/4 in.

Why this value was used

Detailed exact-model side elevation directly prints closed depth to the door face, excluding projecting handles, as 28 3/4 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

31.125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — B36CD52SNS-106159322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-10

Exact-model summary directly prints overall depth with doors and handles as 31 1/8 in; the detailed plan repeats the same endpoint.

Why this value was used

Exact-model summary directly prints overall depth with doors and handles as 31 1/8 in; the detailed plan repeats the same endpoint.

Other evidence found

• 25 in — superseded

  media3.bosch-home.com; location not retained. Model scope: not separately recorded. Raw value: all depth with doors and handles (inches) 31 1/8" Overall depth without doors and handles (inches) 25" Required cutout size (HxWxD) (inches) 70" x 36" x. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

43.375 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — B36CD52SNS-106159322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-10

Exact-model 90-degree plan view directly prints rear-to-front open-door envelope 43 3/8 in.

Why this value was used

Exact-model 90-degree plan view directly prints rear-to-front open-door envelope 43 3/8 in.

Other evidence found

• 44 in — superseded

  www.homedepot.com; location not retained. Model scope: not separately recorded. Raw value: Depth With Door Open 90 Degrees = 44.0 in | ries 36 in. 21.6 cu. ft. Smart Counter Depth ... Depth (Less Door) (in.) 24 in. Depth With Door Open 90 Degrees (in.) 44 in. Height to Top of Door Hinge (in.) 70 in. Height to Top of Refrigerator Case (in. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — B36CD52SNS-106159322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-10

Required cutout size directly prints width 36 in.

Why this value was used

Required cutout size directly prints width 36 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — B36CD52SNS-106159322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-10

Required cutout size directly prints height 70 in; do not add the separately stated top ventilation gap to the printed cutout endpoint.

Why this value was used

Required cutout size directly prints height 70 in; do not add the separately stated top ventilation gap to the printed cutout endpoint.

Other evidence found

• 70.5 in — superseded

  Document 106159322.pdf; page 2. Model scope: not separately recorded. Raw value: 70 in overall height plus documented 1/2 in top ventilation = 70 1/2 in opening.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — B36CD52SNS-106159322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-10

Required cutout size directly prints depth 25 in; this manufacturer cutout endpoint supersedes cabinet-depth-plus-rear-gap calculations.

Why this value was used

Required cutout size directly prints depth 25 in; this manufacturer cutout endpoint supersedes cabinet-depth-plus-rear-gap calculations.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — B36CD52SNS-106159322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-10

Exact-model installation drawing directly prints 1/8 in at each side of the 36-inch opening.

Why this value was used

Exact-model installation drawing directly prints 1/8 in at each side of the 36-inch opening.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — B36CD52SNS-106159322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-10

Exact-model installation drawing directly prints 1/8 in at each side of the 36-inch opening.

Why this value was used

Exact-model installation drawing directly prints 1/8 in at each side of the 36-inch opening.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch installation document — 106159322.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Exact Bosch manual: leave 1/2 in gap at the top for proper ventilation.

Why this value was used

Exact Bosch manual: leave 1/2 in gap at the top for proper ventilation.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch installation document — 106159322.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Exact Bosch manual: leave 1 in behind for proper ventilation.

Why this value was used

Exact Bosch manual: leave 1 in behind for proper ventilation.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — 106159322.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-25

Exact-model Bosch installation details, top view with the doors open 90°: 1 3/4" (45 mm) beyond the cabinet side (same Bosch layout).

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

Exact-model Bosch installation details, top view with the doors open 90°: 1 3/4" (45 mm) beyond the cabinet side (same Bosch layout).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — 106159322.pdf
Bosch · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Exact Bosch dimension drawing prints product/cabinet width 35 5/8 in.

Why this value was used

Exact Bosch dimension drawing prints product/cabinet width 35 5/8 in.

Other evidence found

• 35.62 in — superseded

  media3.bosch-home.com; location not retained. Model scope: not separately recorded. Raw value: Low-confidence same-appliance width mapping: case_width_in=35.62 in from width_doors_closed_in.. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.