Measurement evidence for Beko BFBF3018SSL

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Beko BFBF3018SSL fit check Check this model against your opening How ExactFit verifies measurements

Beko BFBF3018SSL

Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Complete mixed evidence

7exact-model manufacturer values

3verified equivalent/same-chassis values

6secondary-source-only values

0values with unresolved source details

Last reviewed: 2026-09-05. 3 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	29.125 in	✓ Secondary source only	Beko BFBF3018SSL Spec Sheet assets.skulytics.io	Page 2
Value used by ExactFit 29.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Beko BFBF3018SSL Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04 H x W x D) (in) 67 3/4 x 29 1/8 x 30 5/16 16 Open original source ↗ Why this value was used H x W x D) (in) 67 3/4 x 29 1/8 x 30 5/16 16 Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	67.3125 in	✓ Conflicting sources — resolved	BFBF3018SSL Beko	Page 3
Value used by ExactFit 67.3125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence BFBF3018SSL Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 3 Reviewed: 2026-09-04 Height to top of cabinet 67 5/16 in Open original source ↗ Why this value was used Height to top of cabinet 67 5/16 in Other evidence found 67.75 in — superseded 104280247.pdf; page 2. Model scope: not separately recorded. Raw value: H x W x D) (in) 67 3/4 x 29 1/8 x 30 5/16 16. The final reviewed registry supersedes this earlier audit value. Height to top of cabinet 67 5/16 in Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	67.75 in	✓ Secondary source only	Beko BFBF3018SSL Spec Sheet assets.skulytics.io	Page 2
Value used by ExactFit 67.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Beko BFBF3018SSL Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04 H x W x D) (in) 67 3/4 x 29 1/8 x 30 5/16 16 Open original source ↗ Why this value was used H x W x D) (in) 67 3/4 x 29 1/8 x 30 5/16 16 Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	25.5625 in	✓ Secondary source only	Beko BFBF3018SSL Spec Sheet assets.skulytics.io	Page 4
Value used by ExactFit 25.5625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Beko BFBF3018SSL Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-04 Depth of cabinet 259/16" (650 mm) Open original source ↗ Why this value was used Depth of cabinet 259/16" (650 mm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	28.3125 in	✓ Conflicting sources — resolved	BFBF3018SSL Beko	Page 3
Value used by ExactFit 28.3125 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence BFBF3018SSL Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 3 Reviewed: 2026-09-04 Depth with door 28 5/16 in, excluding projecting handle Open original source ↗ Why this value was used Depth with door 28 5/16 in, excluding projecting handle Other evidence found 30.3125 in — superseded 104280247.pdf; page 3. Model scope: not separately recorded. Raw value: Depth with door 305/16" (769.9 mm). The final reviewed registry supersedes this earlier audit value. Depth with door 28 5/16 in, excluding projecting handle Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	30.3125 in	✓ Conflicting sources — resolved	BFBF3018SSL Beko	Page 3
Value used by ExactFit 30.3125 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence BFBF3018SSL Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 3 Reviewed: 2026-09-04 Depth with handle 30 5/16 in Open original source ↗ Why this value was used Depth with handle 30 5/16 in Other evidence found 67.75 in — superseded 104280247.pdf; page 3. Model scope: not separately recorded. Raw value: Depth with handle 673/4" (1720 mm). The final reviewed registry supersedes this earlier audit value. Depth with handle 30 5/16 in Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	56.125 in	✓ Verified — exact model	BFBF3018SSL Beko	Page 3
Value used by ExactFit 56.125 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence BFBF3018SSL Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 3 Reviewed: 2026-09-04 90-degree door diagram total depth 56 1/8 in Open original source ↗ Why this value was used 90-degree door diagram total depth 56 1/8 in Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	30.3125 in	✓ Verified — exact model	BFBF3018SSL Beko	Page 4
Value used by ExactFit 30.3125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence BFBF3018SSL Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-04 Installation opening width 30 5/16 in (770 mm) Open original source ↗ Why this value was used Installation opening width 30 5/16 in (770 mm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	69.75 in	✓ Verified — equivalent model · Calculated/inferred	Beko BFBF3018SS Spec Sheet assets.skulytics.io	Page 4
Value used by ExactFit 69.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence Beko BFBF3018SS Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 Minimum opening height is the verified highest appliance endpoint plus the documented top clearance. Open original source ↗ Why this value was used Minimum opening height is the verified highest appliance endpoint plus the documented top clearance. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Why evidence from BFBF3018SS applies Target model: BFBF3018SSL. Supporting model: BFBF3018SS. Manufacturer: Beko. Product family and measurement relationship: max(height_case_in,height_hinge_in) + top_clearance_in. Measurement transferred: Minimum cutout height. Relevant equivalence evidence: Minimum opening height is the verified highest appliance endpoint plus the documented top clearance.. Known differences: not separately recorded. Review decision: documented cavity formula; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	26.3125 in	✓ Secondary source only · Calculated/inferred	Beko BFBF3018SSL Spec Sheet assets.skulytics.io	Page 4
Value used by ExactFit 26.3125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence Beko BFBF3018SSL Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 Minimum opening depth derived from case-only depth 25.5625 in plus documented rear clearance 0.75 in. Open original source ↗ Why this value was used Minimum opening depth derived from case-only depth 25.5625 in plus documented rear clearance 0.75 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	0.5625 in	✓ Verified — exact model	BFBF3018SSL Beko	Page 4
Value used by ExactFit 0.5625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: Migrated from side_clearance_wall_in by documented endpoint semantics Confidence label: high. Primary evidence BFBF3018SSL Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 Legacy reviewed field migration; endpoint indicators=['each side']; Installation top view: 9/16 in minimum at each side Open original source ↗ Why this value was used Legacy reviewed field migration; endpoint indicators=['each side']; Installation top view: 9/16 in minimum at each side Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	0.5625 in	✓ Verified — exact model	BFBF3018SSL Beko	Page 4
Value used by ExactFit 0.5625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: Migrated from side_clearance_wall_in by documented endpoint semantics Confidence label: high. Primary evidence BFBF3018SSL Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 Legacy reviewed field migration; endpoint indicators=['each side']; Installation top view: 9/16 in minimum at each side Open original source ↗ Why this value was used Legacy reviewed field migration; endpoint indicators=['each side']; Installation top view: 9/16 in minimum at each side Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	2 in	✓ Verified — equivalent model · Calculated/inferred	Beko BFBF3018SS Spec Sheet assets.skulytics.io	Page 4
Value used by ExactFit 2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Beko BFBF3018SS Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 Cached manufacturer document specifies the installation clearances used for this model family. Open original source ↗ Why this value was used Cached manufacturer document specifies the installation clearances used for this model family. Calculation or inference: cached documented shared chassis propagation. Why evidence from BFBF3018SS applies Target model: BFBF3018SSL. Supporting model: BFBF3018SS. Manufacturer: Beko. Product family and measurement relationship: Cached manufacturer document specifies the installation clearances used for this model family.. Measurement transferred: Top clearance. Relevant equivalence evidence: Cached manufacturer document specifies the installation clearances used for this model family.. Known differences: not separately recorded. Review decision: cached documented shared chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	0.75 in	✓ Secondary source only	Beko BFBF3018SSL Spec Sheet assets.skulytics.io	Page 4
Value used by ExactFit 0.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: resolved fraction/unit/scenario semantics from cached full-page evidence Confidence label: high. Primary evidence Beko BFBF3018SSL Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 full-page adjudication=0.75; parser candidates=[0.768, 0.374]; 19.5 mm) minimum clearance at rear Open original source ↗ Why this value was used full-page adjudication=0.75; parser candidates=[0.768, 0.374]; 19.5 mm) minimum clearance at rear Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	0.5625 in	✓ Verified — equivalent model · Calculated/inferred	Beko BFBF3018SS Spec Sheet assets.skulytics.io	Page 4
Value used by ExactFit 0.5625 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Beko BFBF3018SS Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 Cached manufacturer document specifies the installation clearances used for this model family. Open original source ↗ Why this value was used Cached manufacturer document specifies the installation clearances used for this model family. Calculation or inference: cached documented shared chassis propagation. Why evidence from BFBF3018SS applies Target model: BFBF3018SSL. Supporting model: BFBF3018SS. Manufacturer: Beko. Product family and measurement relationship: Cached manufacturer document specifies the installation clearances used for this model family.. Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: Cached manufacturer document specifies the installation clearances used for this model family.. Known differences: not separately recorded. Review decision: cached documented shared chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	29.125 in	✓ Secondary source only	Beko BFBF3018SSL Spec Sheet assets.skulytics.io	Page 2
Value used by ExactFit 29.125 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Beko BFBF3018SSL Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04 H x W x D) (in) 67 3/4 x 29 1/8 x 30 5/16 16 Open original source ↗ Why this value was used H x W x D) (in) 67 3/4 x 29 1/8 x 30 5/16 16 Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	0.5625 in	✓ Verified — exact model	BFBF3018SSL Beko	Page 4
Value used by ExactFit 0.5625 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence BFBF3018SSL Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-04 Installation top view: 9/16 in minimum at each side Open original source ↗ Why this value was used Installation top view: 9/16 in minimum at each side Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Cabinet height

Selected: 67.3125 in. Earlier retained values: 67.75 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Height to top of cabinet 67 5/16 in

View source scope, location, and impact on fit

Depth with door, without handles

Selected: 28.3125 in. Earlier retained values: 30.3125 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Depth with door 28 5/16 in, excluding projecting handle

View source scope, location, and impact on fit

Depth with handle

Selected: 30.3125 in. Earlier retained values: 67.75 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Depth with handle 30 5/16 in

View source scope, location, and impact on fit

Source documents and pages

Beko BFBF3018SSL Spec Sheet

assets.skulytics.io · Spec Sheet · secondary model/source

Model numbers covered: BFBF3018SSL. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

6 displayed measurements supported: Overall width; Height with hinge / controlling height; Depth without door; Minimum cutout depth; Rear clearance; Cabinet case width.

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

BFBF3018SSL

Beko · Web source · exact model/source

Model numbers covered: BFBF3018SSL. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

8 displayed measurements supported: Cabinet height; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Minimum cutout width; Left-side ventilation clearance; Right-side ventilation clearance; Adjoining-wall clearance (reviewed endpoint).

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

Beko BFBF3018SS Spec Sheet

assets.skulytics.io · Spec Sheet · equivalent model/source

Model numbers covered: BFBF3018SS. Publication/revision date: Not recorded. Reviewed: 2026-09-05.

3 displayed measurements supported: Minimum cutout height; Top clearance; Hinge-side wall clearance.

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

Report a problem with this model Check whether BFBF3018SSL fits your opening Back to Beko BFBF3018SSL Read the full verification methodology

Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.

Evidence summary

Complete mixed evidence

Measurements and supporting evidence

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from BFBF3018SS applies

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from BFBF3018SS applies

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from BFBF3018SS applies

Other evidence found