Measurement evidence for Amana ASI2575GRS

Value used by ExactFit

35.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-inch Wide Side-by-Side Refrigerator with Dual Pad External Ice and Water Dispenser - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish ASI2575GRS | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: net Width: 35.5 in | No Max Cool/Fast Cool No Temperature Range -5/+5 FC 33/45 RC ### Dimensions Cab
Reviewed: 2026-09-04

net Width: 35.5 in | No Max Cool/Fast Cool No Temperature Range -5/+5 FC 33/45 RC ### Dimensions Cabinet Width 35.5 in Capacity 24.57 cu. ft. Cutout Depth 27.5 in Cutout Height 69.375 in Cutout Widt

Why this value was used

net Width: 35.5 in | No Max Cool/Fast Cool No Temperature Range -5/+5 FC 33/45 RC ### Dimensions Cabinet Width 35.5 in Capacity 24.57 cu. ft. Cutout Depth 27.5 in Cutout Height 69.375 in Cutout Widt

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.62 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-inch Wide Side-by-Side Refrigerator with Dual Pad External Ice and Water Dispenser - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish ASI2575GRS | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Cabinet: 68.62 in | 5 in Freezer Capacity Volume 9.11 cu. ft. Gross Weight 270 lbs
Reviewed: 2026-09-04

Height To Top Of Cabinet: 68.62 in | 5 in Freezer Capacity Volume 9.11 cu. ft. Gross Weight 270 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 262 lbs Refrigerator Capacity V

Why this value was used

Height To Top Of Cabinet: 68.62 in | 5 in Freezer Capacity Volume 9.11 cu. ft. Gross Weight 270 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 262 lbs Refrigerator Capacity V

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-inch Wide Side-by-Side Refrigerator with Dual Pad External Ice and Water Dispenser - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish ASI2575GRS | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Door Hinge: 69.25 in | u. ft. Gross Weight 270 lbs Height 69.625 in Height To Top O
Reviewed: 2026-09-04

Height To Top Of Door Hinge: 69.25 in | u. ft. Gross Weight 270 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 262 lbs Refrigerator Capacity Volume 15.46 cu. ft., 15.46 cu. ft. To

Why this value was used

Height To Top Of Door Hinge: 69.25 in | u. ft. Gross Weight 270 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 262 lbs Refrigerator Capacity Volume 15.46 cu. ft., 15.46 cu. ft. To

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-inch Wide Side-by-Side Refrigerator with Dual Pad External Ice and Water Dispenser - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish ASI2575GRS | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handl
Reviewed: 2026-09-04

Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.375 in Freezer Capacity Volume 9.11 cu. ft. G

Why this value was used

Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.375 in Freezer Capacity Volume 9.11 cu. ft. G

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.62 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-inch Wide Side-by-Side Refrigerator with Dual Pad External Ice and Water Dispenser - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish ASI2575GRS | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Excluding Handles: 31.62 in | Cutout Depth 27.5 in Cutout Height 69.375 in Cutout Width
Reviewed: 2026-09-04

Depth Closed Excluding Handles: 31.62 in | Cutout Depth 27.5 in Cutout Height 69.375 in Cutout Width 36 in Depth 34.125 in Depth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With

Why this value was used

Depth Closed Excluding Handles: 31.62 in | Cutout Depth 27.5 in Cutout Height 69.375 in Cutout Width 36 in Depth 34.125 in Depth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.12 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-inch Wide Side-by-Side Refrigerator with Dual Pad External Ice and Water Dispenser - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish ASI2575GRS | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Including Handles: 34.12 in | in Cutout Width 36 in Depth 34.125 in Depth Closed Exclu
Reviewed: 2026-09-04

Depth Closed Including Handles: 34.12 in | in Cutout Width 36 in Depth 34.125 in Depth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.375 in Freezer Ca

Why this value was used

Depth Closed Including Handles: 34.12 in | in Cutout Width 36 in Depth 34.125 in Depth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.375 in Freezer Ca

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49.38 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-inch Wide Side-by-Side Refrigerator with Dual Pad External Ice and Water Dispenser - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish ASI2575GRS | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors 28 in Depth With Door Open 90: 49.38 in | pth Closed Excluding Handles 31.625
Reviewed: 2026-09-04

Depth Excluding Doors 28 in Depth With Door Open 90: 49.38 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.375 in Freezer Capacity Volume 9.11 cu. ft. Gross Weight 270 lbs Height 69.625 in Heig

Why this value was used

Depth Excluding Doors 28 in Depth With Door Open 90: 49.38 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.375 in Freezer Capacity Volume 9.11 cu. ft. Gross Weight 270 lbs Height 69.625 in Heig

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-inch Wide Side-by-Side Refrigerator with Dual Pad External Ice and Water Dispenser - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish ASI2575GRS | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cutout Width: 36.0 in | dth 35.5 in Capacity 24.57 cu. ft. Cutout Depth 27.5 in Cutout Height 69.375
Reviewed: 2026-09-04

Cutout Width: 36.0 in | dth 35.5 in Capacity 24.57 cu. ft. Cutout Depth 27.5 in Cutout Height 69.375 in Cutout Width 36 in Depth 34.125 in Depth Closed Excluding Handles 31.625 in Depth Closed Including

Why this value was used

Cutout Width: 36.0 in | dth 35.5 in Capacity 24.57 cu. ft. Cutout Depth 27.5 in Cutout Height 69.375 in Cutout Width 36 in Depth 34.125 in Depth Closed Excluding Handles 31.625 in Depth Closed Including

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Amana measurement source — https://www.amana.com/content/dam/global/documents/201803/installation-instruction-w11105306-rev-a.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 6
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 69.25 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 69.25 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

30 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Amana measurement source — https://www.amana.com/content/dam/global/documents/201803/installation-instruction-w11105306-rev-a.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 6
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 28.0 in plus documented rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 28.0 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ASI2575G****

Confidence label: medium.

Primary evidence

Amana measurement source — https://www.amana.com/content/dam/global/documents/201803/installation-instruction-w11105306-rev-a.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 6
Reviewed: 2026-09-05

1/2" of space on each side and at the top

Why this value was used

1/2" of space on each side and at the top Calculation or inference: documented DOE model pattern ASI2575G****.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ASI2575G****

Confidence label: medium.

Primary evidence

Amana measurement source — https://www.amana.com/content/dam/global/documents/201803/installation-instruction-w11105306-rev-a.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 6
Reviewed: 2026-09-05

2" of space behind

Why this value was used

2" of space behind Calculation or inference: documented DOE model pattern ASI2575G****.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Amana ASI2175GRB Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

next to a fixed wall, leave a 2" (5.08 cm

Why this value was used

next to a fixed wall, leave a 2" (5.08 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.5 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-inch Wide Side-by-Side Refrigerator with Dual Pad External Ice and Water Dispenser - 25 Cu. Ft. Fingerprint-Resistant Stainless Finish ASI2575GRS | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width: 35.5 in | een No Max Cool/Fast Cool No Temperature Range -5/+5 FC 33/45 RC ### Dimens
Reviewed: 2026-09-04

Cabinet Width: 35.5 in | een No Max Cool/Fast Cool No Temperature Range -5/+5 FC 33/45 RC ### Dimensions Cabinet Width 35.5 in Capacity 24.57 cu. ft. Cutout Depth 27.5 in Cutout Height 69.375 in Cutout Widt

Why this value was used

Cabinet Width: 35.5 in | een No Max Cool/Fast Cool No Temperature Range -5/+5 FC 33/45 RC ### Dimensions Cabinet Width 35.5 in Capacity 24.57 cu. ft. Cutout Depth 27.5 in Cutout Height 69.375 in Cutout Widt

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Whirlpool-platform freestanding family installation clearance

Confidence label: low.

Primary evidence

Amana measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-04

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.