Measurement evidence for Amana ASI2175GRS

Value used by ExactFit

33.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — refrigerator-comparison-chart.html
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official Amana comparison chart Width = 33.125 in; distinct from Cabinet Width.
Reviewed: 2026-09-09

Official Amana comparison chart Width = 33.125 in; distinct from Cabinet Width.

Why this value was used

Official Amana comparison chart Width = 33.125 in; distinct from Cabinet Width.

Other evidence found

• 32.75 in — superseded

  www.amana.com; location not retained. Model scope: not separately recorded. Raw value: net Width: 32.75 in | Refrigerator Refrigerator Type Side-by-Side Wheels 4-Natural ### Dimensions Cabinet Width 32.75 in Capacity 21.41 cu. ft. Depth 34.125 in Depth Closed Excluding Handles 31.625 in. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — p.33-inch-side-by-side-refrigerator-with-dual-pad-external-ice-and-water-dispenser.asi2175grs.html
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 65.62 in is the same printed dimension as 65 5/8 in (65.6
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 65.62 in is the same printed dimension as 65 5/8 in (65.625); every finish of the ASI2175GR family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 65.62 in is the same printed dimension as 65 5/8 in (65.625); every finish of the ASI2175GR family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 65.62 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Cabinet: 65.62 in | 5 in Freezer Capacity Volume 6.77 cu. ft. Gross Weight 250 lbs Height 65.625 in Height To Top Of Cabinet 65.625 in Height To Top Of Door Hinge 66.25 in Net Weight 242.5 lbs Refrigerator Capacity. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — p.33-inch-side-by-side-refrigerator-with-dual-pad-external-ice-and-water-dispenser.asi2175grs.html
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Door Hinge: 66.25 in | u. ft. Gross Weight 250 lbs Height 65.625 in Height To Top O
Reviewed: 2026-09-04

Height To Top Of Door Hinge: 66.25 in | u. ft. Gross Weight 250 lbs Height 65.625 in Height To Top Of Cabinet 65.625 in Height To Top Of Door Hinge 66.25 in Net Weight 242.5 lbs Refrigerator Capacity Volume 14.64, 14.64 Total Refrigerat

Why this value was used

Height To Top Of Door Hinge: 66.25 in | u. ft. Gross Weight 250 lbs Height 65.625 in Height To Top Of Cabinet 65.625 in Height To Top Of Door Hinge 66.25 in Net Weight 242.5 lbs Refrigerator Capacity Volume 14.64, 14.64 Total Refrigerat

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — p.33-inch-side-by-side-refrigerator-with-dual-pad-external-ice-and-water-dispenser.asi2175grs.html
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handl
Reviewed: 2026-09-04

Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.375 in Freezer Capacity Volume 6.77 cu. ft. G

Why this value was used

Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.375 in Freezer Capacity Volume 6.77 cu. ft. G

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — p.33-inch-side-by-side-refrigerator-with-dual-pad-external-ice-and-water-dispenser.asi2175grs.html
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 31.62 in is the same printed dimension as 31 5/8 in (31.6
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 31.62 in is the same printed dimension as 31 5/8 in (31.625); every finish of the ASI2175GR family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 31.62 in is the same printed dimension as 31 5/8 in (31.625); every finish of the ASI2175GR family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 31.62 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Depth Closed Excluding Handles: 31.62 in | al ### Dimensions Cabinet Width 32.75 in Capacity 21.41 cu. ft. Depth 34.125 in Depth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — p.33-inch-side-by-side-refrigerator-with-dual-pad-external-ice-and-water-dispenser.asi2175grs.html
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 34.12 in is the same printed dimension as 34 1/8 in (34.1
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 34.12 in is the same printed dimension as 34 1/8 in (34.125); every finish of the ASI2175GR family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 34.12 in is the same printed dimension as 34 1/8 in (34.125); every finish of the ASI2175GR family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 34.12 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Depth Closed Including Handles: 34.12 in | Capacity 21.41 cu. ft. Depth 34.125 in Depth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.375 in Freezer Ca. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49.375 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — p.33-inch-side-by-side-refrigerator-with-dual-pad-external-ice-and-water-dispenser.asi2175grs.html
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Rounding normalised 2026-10-22: the stored 49.38 in is the same printed dimension as 49 3/8 in (49.3
Reviewed: 2026-10-22

Rounding normalised 2026-10-22: the stored 49.38 in is the same printed dimension as 49 3/8 in (49.375); every finish of the ASI2175GR family carries the same value to within 0.02 in. Source kept as stored.

Why this value was used

Rounding normalised 2026-10-22: the stored 49.38 in is the same printed dimension as 49 3/8 in (49.375); every finish of the ASI2175GR family carries the same value to within 0.02 in. Source kept as stored.

Other evidence found

• 49.38 in — superseded

  The same document as the value used above; location not retained. Model scope: not separately recorded. Raw value: Depth Excluding Doors 28 in Depth With Door Open 90: 49.38 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.375 in Freezer Capacity Volume 6.77 cu. ft. Gross Weight 250 lbs Height 65.625 in Heig. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Amana measurement source — amana+asi2175grs
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: ch as an oven or radiator. Normal minimum cabinet cut-out width required for product installation is
Reviewed: 2026-09-04

ch as an oven or radiator. Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm). However, if the product is placed aga

Why this value was used

ch as an oven or radiator. Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm). However, if the product is placed aga

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Amana measurement source — 105163299.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 66.25 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 66.25 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

30 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Amana measurement source — 105163304.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-09

28-in case depth + applicable 2-in Standard-branch rear requirement = 30 in.

Why this value was used

28-in case depth + applicable 2-in Standard-branch rear requirement = 30 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — 105163304.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-10-29

This model's own Amana document, page 7: "allow for 1/2" (1.27 cm) of space on each side and at the top."

Why this value was used

This model's own Amana document, page 7: "allow for 1/2" (1.27 cm) of space on each side and at the top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — 105163304.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-10-29

This model's own Amana document, page 7: "allow for 1/2" (1.27 cm) of space on each side and at the top."

Why this value was used

This model's own Amana document, page 7: "allow for 1/2" (1.27 cm) of space on each side and at the top."

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Amana measurement source — 105163299.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

1.27 cm) of space on each side and at the top

Why this value was used

1.27 cm) of space on each side and at the top Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — 105163304.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-09

Applicable Standard Side-by-Side branch requires 2 in behind; prior value used Counter-Depth branch.

Why this value was used

Applicable Standard Side-by-Side branch requires 2 in behind; prior value used Counter-Depth branch.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Amana measurement source — 105163299.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). next to a fixed wall, leave a 2" (5.08 cm

Why this value was used

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). next to a fixed wall, leave a 2" (5.08 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.75 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — p.33-inch-side-by-side-refrigerator-with-dual-pad-external-ice-and-water-dispenser.asi2175grs.html
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width: 32.75 in | ion Refrigerator Refrigerator Type Side-by-Side Wheels 4-Natural ### Dimen
Reviewed: 2026-09-04

Cabinet Width: 32.75 in | ion Refrigerator Refrigerator Type Side-by-Side Wheels 4-Natural ### Dimensions Cabinet Width 32.75 in Capacity 21.41 cu. ft. Depth 34.125 in Depth Closed Excluding Handles 31.625 in

Why this value was used

Cabinet Width: 32.75 in | ion Refrigerator Refrigerator Type Side-by-Side Wheels 4-Natural ### Dimensions Cabinet Width 32.75 in Capacity 21.41 cu. ft. Depth 34.125 in Depth Closed Excluding Handles 31.625 in

Other evidence found

• 54 in — superseded

  www.notice-facile.com; location not retained. Model scope: not separately recorded. Raw value: pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet opening width of 54" (137.16 cm) is recommended. ## For Counter-Depth . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.