Measurement evidence for Amana ARTX2314TB

Value used by ExactFit

28 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in = cabinet width B

Confidence label: high.

Primary evidence

Amana measurement source — dimension-guide-w11821756-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-22

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: B Width of cabinet 28" (71.1 cm); the drawing shows the doors within the cabinet width.

Why this value was used

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: B Width of cabinet 28" (71.1 cm); the drawing shows the doors within the cabinet width. Calculation or inference: width_doors_closed_in = cabinet width B.

Other evidence found

• 27.94 in — superseded

  www.amana.com; location not retained. Model scope: not separately recorded. Raw value: net Width: 27.94 in | on of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Cabinet Width 27.938 in Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

62.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — dimension-guide-w11821756-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-22

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: D Height of cabinet 62 3/8" (158.5 cm). Replaces the rounded 62.38 in.

Why this value was used

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: D Height of cabinet 62 3/8" (158.5 cm). Replaces the rounded 62.38 in.

Other evidence found

• 62.38 in — superseded

  www.amana.com; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Cabinet: 62.38 in | pth-Drawer Open 54.688 in Freezer Capacity Volume 3.84 cu. ft. Height 63.125 in Height To Top Of Cabinet 62.375 in Height To Top Of Door Hinge 62.875 in Height To Top Of Door Trim 63.125 in Maxi. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

62.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — dimension-guide-w11821756-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-22

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: E Overall Height 62 7/8" (159.8 cm). Replaces the rounded 62.88 in.

Why this value was used

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: E Overall Height 62 7/8" (159.8 cm). Replaces the rounded 62.88 in.

Other evidence found

• 62.88 in — superseded

  www.amana.com; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Door Hinge: 62.88 in | apacity Volume 3.84 cu. ft. Height 63.125 in Height To Top Of Cabinet 62.375 in Height To Top Of Door Hinge 62.875 in Height To Top Of Door Trim 63.125 in Maximum Height 63.125 in Minimum Height 62. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — dimension-guide-w11821756-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-22

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: C Depth of cabinet only 25 1/4" (64 cm). Replaces the web figure 25.19 in.

Why this value was used

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: C Depth of cabinet only 25 1/4" (64 cm). Replaces the web figure 25.19 in.

Other evidence found

• 25.19 in — superseded

  www.amana.com; location not retained. Model scope: not separately recorded. Raw value: Depth Excluding Doors: 25.19 in | pth Closed Excluding Handles 28.625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.688 in Depth-Drawer Open 54.688 in Freezer Ca. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — dimension-guide-w11821756-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-22

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: A Depth with door 28 5/8" (72.8 cm); the doors have no projecting handles. Replaces the rounded 28.62 in.

Why this value was used

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: A Depth with door 28 5/8" (72.8 cm); the doors have no projecting handles. Replaces the rounded 28.62 in.

Other evidence found

• 90 in — superseded

  www.shopappliances.com; location not retained. Model scope: not separately recorded. Raw value: depth without handles : Depth with Door Opened at 90 Degrees . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗
• 90 in — superseded

  www.shopappliances.com; location not retained. Model scope: not separately recorded. Raw value: depth without handles : Depth with Door Opened at 90 Degrees . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗
• 90 in — superseded

  www.shopappliances.com; location not retained. Model scope: not separately recorded. Raw value: depth without handles : Depth with Door Opened at 90 Degrees . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗
• 90 in — superseded

  www.shopappliances.com; location not retained. Model scope: not separately recorded. Raw value: depth without handles : Depth with Door Opened at 90 Degrees . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗
• 28.62 in — superseded

  www.amana.com; location not retained. Model scope: not separately recorded. Raw value: Depth Closed Excluding Handles: 28.62 in | ds ### Dimensions Cabinet Width 27.938 in Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — dimension-guide-w11821756-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-22

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: A Depth with door 28 5/8" (72.8 cm); the drawing shows no projecting handle. Replaces the rounded 28.62 in.

Why this value was used

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: A Depth with door 28 5/8" (72.8 cm); the drawing shows no projecting handle. Replaces the rounded 28.62 in.

Other evidence found

• 28.62 in — superseded

  www.amana.com; location not retained. Model scope: not separately recorded. Raw value: Depth Closed Including Handles: 28.62 in | Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.688 in Depth-. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

54.688 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — p.28.5-inch-wide-top-freezer-refrigerator-with-a-large-crisper-drawer-14-cu.-ft.artx2314tb.html
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth With Door Open 90 = 54.688 in | 625 in Depth Closed Including Handles 28.625 in Depth Excludin
Reviewed: 2026-09-04

Depth With Door Open 90 = 54.688 in | 625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.688 in Depth-Drawer Open 54.688 in Freezer Capacity Volume 3.84 cu. ft. Height 63.125

Why this value was used

Depth With Door Open 90 = 54.688 in | 625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.688 in Depth-Drawer Open 54.688 in Freezer Capacity Volume 3.84 cu. ft. Height 63.125

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 28.0 + 2 * 0.5

Confidence label: medium.

Primary evidence

Amana measurement source — dimension-guide-w11821756-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 28.0
Reviewed: 2026-09-04

Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 28.0 + 2 * 0.5 = 29.0 in

Why this value was used

Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 28.0 + 2 * 0.5 = 29.0 in Calculation or inference: 28.0 + 2 * 0.5.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: high.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Amana measurement source — dimension-guide-w11821756-reva.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-22

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) : overall height 62 7/8" (p.1) plus the printed 3" (7.5 cm) between overhead cabinets and the refrigerator top (p.2) = 65 7/8 in.

Why this value was used

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) : overall height 62 7/8" (p.1) plus the printed 3" (7.5 cm) between overhead cabinets and the refrigerator top (p.2) = 65 7/8 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

• 64.38 in — superseded

  Document 106159054.pdf; page 5. Model scope: not separately recorded. Raw value: Installation envelope: max(case 62.38, hinge 62.88) + 1.5 in top = 64.38 in.. The final reviewed registry supersedes this earlier audit value.

• 65.88 in — superseded

  Document c953ad78354e076c857c1e60e558e55d73d1cd168ed21b133c02663477b17b4b.pdf; page 2. Model scope: not separately recorded. Raw value: Current stored 62.88-in controlling height + direct 3-in top requirement = 65.88 in.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26.25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Amana measurement source — dimension-guide-w11821756-reva.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-22

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) : cabinet-only depth 25 1/4" (p.1) plus the printed 1" (2.54 cm) between the back of the cabinet and the wall (p.2) = 26 1/4 in.

Why this value was used

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) : cabinet-only depth 25 1/4" (p.1) plus the printed 1" (2.54 cm) between the back of the cabinet and the wall (p.2) = 26 1/4 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

• 26.19 in — superseded

  Document 106159054.pdf; page 5. Model scope: not separately recorded. Raw value: Installation envelope: 25.19 in case depth + 1 in rear = 26.19 in.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ARTX2314T***

Confidence label: high.

Primary evidence

Amana measurement source — dimension-guide-w11821756-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern ARTX2314T***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ARTX2314T***

Confidence label: high.

Primary evidence

Amana measurement source — dimension-guide-w11821756-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern ARTX2314T***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — c953ad78354e076c857c1e60e558e55d73d1cd168ed21b133c02663477b17b4b.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

W11821756A current exact-family guide requires 3 in above the refrigerator.

Why this value was used

W11821756A current exact-family guide requires 3 in above the refrigerator.

Other evidence found

• 1.5 in — superseded

  Document 106159054.pdf; page 5. Model scope: not separately recorded. Raw value: Exact ARTX family manual: allow 1 1/2" between overhead cabinets and refrigerator top.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana installation document — 106159054.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

Exact ARTX family manual: allow at least 1" between back of cabinet and wall.

Why this value was used

Exact ARTX family manual: allow at least 1" between back of cabinet and wall.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: (29.688 - 27.938)

Confidence label: high.

Primary evidence

Amana measurement source — ARTX2314TB?fields=FULL&lang=en_US
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-25

Manufacturer page/document for Exact manufacturer product API record for ARTX2314TB.: "Cabinet Width" = 27.938 in; "Width Doors Open 90 Degrees" = 29.688 in.. Found 2026-10-25.

Why this value was used

Manufacturer page/document for Exact manufacturer product API record for ARTX2314TB.: "Cabinet Width" = 27.938 in; "Width Doors Open 90 Degrees" = 29.688 in.. Found 2026-10-25.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — dimension-guide-w11821756-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-22

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: B Width of cabinet 28" (71.1 cm). Replaces the web figure 27.94 in.

Why this value was used

Amana dimension guide W11821756A (ARTX2014T***, ARTX2314T***) p.1 table: B Width of cabinet 28" (71.1 cm). Replaces the web figure 27.94 in.

Other evidence found

• 27.94 in — superseded

  www.amana.com; location not retained. Model scope: not separately recorded. Raw value: Cabinet Width: 27.94 in | iation of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Cabinet Width 27.938 in Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.