Measurement evidence for Amana ARTX2021TB

Value used by ExactFit

32.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — p.33-inch-wide-top-freezer-refrigerator-with-dual-crisper-drawers-21-cu.-ft.artx2021tb.html
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: net Width: 32.5 in | Number of Shelves 1 Freezer Shelves 1 Fixed Full Width Wire ### Dimensions Cab
Reviewed: 2026-09-04

net Width: 32.5 in | Number of Shelves 1 Freezer Shelves 1 Fixed Full Width Wire ### Dimensions Cabinet Width 32.5 in Depth 31.875 in Depth Closed Excluding Handles 31.875 in Depth Closed Including

Why this value was used

net Width: 32.5 in | Number of Shelves 1 Freezer Shelves 1 Fixed Full Width Wire ### Dimensions Cabinet Width 32.5 in Depth 31.875 in Depth Closed Excluding Handles 31.875 in Depth Closed Including

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — 8f89cc949115b19cfc3d216a4ff5743f3246eddc8ced2a8f52436ffe8601e05f.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-24

Printed case height for ARTX2021T***: 65 1/2 in. Replaces the rounded web value 65.31 in.

Why this value was used

Printed case height for ARTX2021T***: 65 1/2 in. Replaces the rounded web value 65.31 in.

Other evidence found

• 65.31 in — superseded

  www.amana.com; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Cabinet: 65.31 in | th-Drawer Open 61.875 in Freezer Capacity Volume 6.07 cu. ft. Height 66.0625 in Height To Top Of Cabinet 65.313 in Height To Top Of Door Hinge 66 in Height To Top Of Door Trim 66.063 in Maximum . The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — 8f89cc949115b19cfc3d216a4ff5743f3246eddc8ced2a8f52436ffe8601e05f.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-24

Printed overall height including hinge for ARTX2021T***: 66 1/4 in.

Why this value was used

Printed overall height including hinge for ARTX2021T***: 66 1/4 in.

Other evidence found

• 66 in — superseded

  www.amana.com; location not retained. Model scope: not separately recorded. Raw value: Height To Top Of Door Hinge: 66.0 in | pacity Volume 6.07 cu. ft. Height 66.0625 in Height To Top Of Cabinet 65.313 in Height To Top Of Door Hinge 66 in Height To Top Of Door Trim 66.063 in Maximum Height 66.0625 in Minimum Height 6. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

27.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — 8f89cc949115b19cfc3d216a4ff5743f3246eddc8ced2a8f52436ffe8601e05f.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-24

Printed cabinet-only depth for ARTX2021T***: 27 7/8 in.

Why this value was used

Printed cabinet-only depth for ARTX2021T***: 27 7/8 in.

Other evidence found

• 27.81 in — superseded

  www.amana.com; location not retained. Model scope: not separately recorded. Raw value: Depth Excluding Doors: 27.81 in | pth Closed Excluding Handles 31.875 in Depth Closed Including Handles 31.875 in Depth Excluding Doors 27.813 in Depth With Door Open 90 Degree 61.875 in Depth-Drawer Open 61.875 in Freezer Ca. The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.88 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — p.33-inch-wide-top-freezer-refrigerator-with-dual-crisper-drawers-21-cu.-ft.artx2021tb.html
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 31.88 in. Context:
Reviewed: 2026-09-04

Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 31.88 in. Context: es 1 Fixed Full Width Wire ### Dimensions Cabinet Width 32.5 in Depth 31.875 in Depth Closed Excluding Handles 31.875 in Depth Closed Including Handles 31.875 in Depth Excluding Doors 27.813 in Depth

Why this value was used

Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 31.88 in. Context: es 1 Fixed Full Width Wire ### Dimensions Cabinet Width 32.5 in Depth 31.875 in Depth Closed Excluding Handles 31.875 in Depth Closed Including Handles 31.875 in Depth Excluding Doors 27.813 in Depth

Other evidence found

• 31 in — superseded

  appliancedepot.com; location not retained. Model scope: not separately recorded. Raw value: ator Cu. Ft. 20 Cu. Ft. - 23 Cu. Ft. Refrigerator Depth (Without Handles) 31" - 31.9" Refrigerator Height (Including Hinge) 63". The final reviewed registry supersedes this earlier audit value.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

31.88 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — p.33-inch-wide-top-freezer-refrigerator-with-dual-crisper-drawers-21-cu.-ft.artx2021tb.html
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Including Handles: 31.88 in | Cabinet Width 32.5 in Depth 31.875 in Depth Closed Exclu
Reviewed: 2026-09-04

Depth Closed Including Handles: 31.88 in | Cabinet Width 32.5 in Depth 31.875 in Depth Closed Excluding Handles 31.875 in Depth Closed Including Handles 31.875 in Depth Excluding Doors 27.813 in Depth With Door Open 90 Degree 61.875 in Depth-

Why this value was used

Depth Closed Including Handles: 31.88 in | Cabinet Width 32.5 in Depth 31.875 in Depth Closed Excluding Handles 31.875 in Depth Closed Including Handles 31.875 in Depth Excluding Doors 27.813 in Depth With Door Open 90 Degree 61.875 in Depth-

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

61.88 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Amana measurement source — amana-33-inch-wide-top-freezer-refrigerator-with-dual-crisper-drawers-21-cu-ft-artx2021tb
appliancedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: 31.88 in | | Depth Excluding Doors | 27.81 in | | Depth With Door Open 90 Degree | 61.88 in | | Free
Reviewed: 2026-09-04

31.88 in | | Depth Excluding Doors | 27.81 in | | Depth With Door Open 90 Degree | 61.88 in | | Freezer Capacity Volume | 6.07 cu. ft. | | He

Why this value was used

31.88 in | | Depth Excluding Doors | 27.81 in | | Depth With Door Open 90 Degree | 61.88 in | | Freezer Capacity Volume | 6.07 cu. ft. | | He

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 32.5 + 2 * 0.5

Confidence label: medium.

Primary evidence

Amana measurement source — p.33-inch-wide-top-freezer-refrigerator-with-dual-crisper-drawers-21-cu.-ft.artx2021tb.html + side gap from the maker's document
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 33.5 in from product width 32.5 in and explicit 0.5 in clearance on ea
Reviewed: 2026-09-04

Derived minimum opening width 33.5 in from product width 32.5 in and explicit 0.5 in clearance on each side.

Why this value was used

Derived minimum opening width 33.5 in from product width 32.5 in and explicit 0.5 in clearance on each side. Calculation or inference: max(case width, width doors closed) + 2 * explicit side clearance = 32.5 + 2 * 0.5.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: height_hinge_in + top_clearance_in

Confidence label: high.

Calculation inputs: Height with hinge / controlling height; Top clearance;

Primary evidence

Amana measurement source — 8f89cc949115b19cfc3d216a4ff5743f3246eddc8ced2a8f52436ffe8601e05f.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-24

Recalculated 2026-09-24 with the stored formula from current inputs: height_hinge_in + top_clearance_in with height_hinge_in = 66.25, top_clearance_in = 0.5 = 66.75 in (previously 66.5 in).

Why this value was used

Recalculated 2026-09-24 with the stored formula from current inputs: height_hinge_in + top_clearance_in with height_hinge_in = 66.25, top_clearance_in = 0.5 = 66.75 in (previously 66.5 in). Calculation or inference: height_hinge_in + top_clearance_in.

Other evidence found

• 67.5 in — superseded

  Document 105605787.pdf; page 5. Model scope: not separately recorded. Raw value: Installation envelope: max(case 65.31, hinge 66) + 1.5 in top = 67.5 in.. The final reviewed registry supersedes this earlier audit value.

• 66.5 in — superseded

  The same document as the value used above; page 2. Model scope: not separately recorded. Raw value: Current stored 66-in controlling height + direct 1/2-in top requirement = 66.5 in.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Amana measurement source — 105605787.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-24

Recalculated 2026-09-24 with the stored formula from current inputs: depth_case_only_in + rear_clearance_in with depth_case_only_in = 27.875, rear_clearance_in = 1 = 28.875 in (previously 28.81 in).

Why this value was used

Recalculated 2026-09-24 with the stored formula from current inputs: depth_case_only_in + rear_clearance_in with depth_case_only_in = 27.875, rear_clearance_in = 1 = 28.875 in (previously 28.81 in). Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

• 28.81 in — superseded

  The same document as the value used above; page 5. Model scope: not separately recorded. Raw value: Installation envelope: 27.81 in case depth + 1 in rear = 28.81 in.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ARTX2021T***

Confidence label: high.

Primary evidence

Amana measurement source — dimension-guide-w11821762-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern ARTX2021T***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ARTX2021T***

Confidence label: high.

Primary evidence

Amana measurement source — dimension-guide-w11821762-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern ARTX2021T***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — 8f89cc949115b19cfc3d216a4ff5743f3246eddc8ced2a8f52436ffe8601e05f.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

W11821762A current exact-family guide requires 1/2 in above the refrigerator.

Why this value was used

W11821762A current exact-family guide requires 1/2 in above the refrigerator.

Other evidence found

• 1.5 in — superseded

  Document 105605787.pdf; page 5. Model scope: not separately recorded. Raw value: Exact ARTX family manual: allow 1 1/2" between overhead cabinets and refrigerator top.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana installation document — 105605787.pdf
assets.skulytics.io · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

Exact ARTX family manual: allow at least 1" between back of cabinet and wall.

Why this value was used

Exact ARTX family manual: allow at least 1" between back of cabinet and wall.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: corrected from full-page labeled dimension context

Confidence label: high.

Primary evidence

Amana measurement source — 8f89cc949115b19cfc3d216a4ff5743f3246eddc8ced2a8f52436ffe8601e05f.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave 2" (5 cm

Why this value was used

Migrated from hinge_side_wall_clearance_in (door angle not stated, 6 in or less). next to a fixed wall, leave 2" (5 cm

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.5 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — p.33-inch-wide-top-freezer-refrigerator-with-dual-crisper-drawers-21-cu.-ft.artx2021tb.html
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width = 32.5 in | ezer Number of Shelves 1 Freezer Shelves 1 Fixed Full Width Wire ### Dimen
Reviewed: 2026-09-04

Cabinet Width = 32.5 in | ezer Number of Shelves 1 Freezer Shelves 1 Fixed Full Width Wire ### Dimensions Cabinet Width 32.5 in Depth 31.875 in Depth Closed Excluding Handles 31.875 in Depth Closed Including

Why this value was used

Cabinet Width = 32.5 in | ezer Number of Shelves 1 Freezer Shelves 1 Fixed Full Width Wire ### Dimensions Cabinet Width 32.5 in Depth 31.875 in Depth Closed Excluding Handles 31.875 in Depth Closed Including

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.