Measurement evidence for Whirlpool WRX986SIHZ

Value used by ExactFit

35.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511934.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Product Dimensions (H x W x D) - W 35-3/4"

Why this value was used

Product Dimensions (H x W x D) - W 35-3/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Height - Top of Cabinet 683/4"

Why this value was used

Height - Top of Cabinet 683/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Height Overall 701/8"

Why this value was used

Height Overall 701/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth - Cabinet Only 29" (737

Why this value was used

Depth - Cabinet Only 29" (737

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth - Without Handles 333/4" (847

Why this value was used

Depth - Without Handles 333/4" (847

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.375 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth - With Handles mm) 363/8" (924

Why this value was used

Depth - With Handles mm) 363/8" (924

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

48.625 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth - Door Open 90° 485/8"

Why this value was used

Depth - Door Open 90° 485/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * side_ventilation_clearance_in

Confidence label: high.

Calculation inputs: Overall width; Left-side ventilation clearance;

Primary evidence

Whirlpool measurement source — 105511934.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

{"calculation": "width_doors_closed_in + 2 * side_ventilation_clearance_in", "operands": {"side_ventilation_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511940.pdf", "page": 2, "raw": "To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2\" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1\" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511940.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511934.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511934.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511938.pdf", "page": 8, "raw": "Space on each side 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511938.pdf", "value_in": 0.5}], "width_doors_closed_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511934.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - W 35-3/4\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511934.pdf", "value_in": 35.75}]}, "result_in": 36.75}

Why this value was used

{"calculation": "width_doors_closed_in + 2 * side_ventilation_clearance_in", "operands": {"side_ventilation_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511940.pdf", "page": 2, "raw": "To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2\" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1\" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511940.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511934.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511934.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511938.pdf", "page": 8, "raw": "Space on each side 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511938.pdf", "value_in": 0.5}], "width_doors_closed_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511934.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - W 35-3/4\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511934.pdf", "value_in": 35.75}]}, "result_in": 36.75} Calculation or inference: width_doors_closed_in + 2 * side_ventilation_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 70.125 + top_clearance_in

Confidence label: high.

Calculation inputs: Top clearance;

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

{"calculation": "70.125 + top_clearance_in", "operands": {"height_hinge_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511940.pdf", "page": 1, "raw": "Height Overall 701/8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511940.pdf", "value_in": 70.125}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511934.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - H 70-1/8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511934.pdf", "value_in": 70.125}], "top_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511940.pdf", "page": 2, "raw": "To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2\" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1\" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511940.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511934.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511934.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511938.pdf", "page": 8, "raw": "Space at the top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511938.pdf", "value_in": 0.5}]}, "result_in": 70.625}

Why this value was used

{"calculation": "70.125 + top_clearance_in", "operands": {"height_hinge_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511940.pdf", "page": 1, "raw": "Height Overall 701/8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511940.pdf", "value_in": 70.125}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511934.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - H 70-1/8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511934.pdf", "value_in": 70.125}], "top_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511940.pdf", "page": 2, "raw": "To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2\" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1\" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511940.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511934.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511934.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511938.pdf", "page": 8, "raw": "Space at the top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511938.pdf", "value_in": 0.5}]}, "result_in": 70.625} Calculation or inference: 70.125 + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

30 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511940.pdf", "page": 1, "raw": "Depth - Cabinet Only 29\" (737", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511940.pdf", "value_in": 29.0}], "rear_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511940.pdf", "page": 2, "raw": "To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2\" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1\" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you leave extra space at the back for the water line connections.", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511940.pdf", "value_in": 1.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511934.pdf", "page": 1, "raw": "Allow extra 1\" on rear 1\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511934.pdf", "value_in": 1.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511938.pdf", "page": 8, "raw": "Space behind the refrigerator 1\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511938.pdf", "value_in": 1.0}]}, "result_in": 30.0}

Why this value was used

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511940.pdf", "page": 1, "raw": "Depth - Cabinet Only 29\" (737", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511940.pdf", "value_in": 29.0}], "rear_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511940.pdf", "page": 2, "raw": "To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2\" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1\" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you leave extra space at the back for the water line connections.", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511940.pdf", "value_in": 1.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511934.pdf", "page": 1, "raw": "Allow extra 1\" on rear 1\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511934.pdf", "value_in": 1.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRX986SIHZ/105511938.pdf", "page": 8, "raw": "Space behind the refrigerator 1\"", "source_url": "https://assets.skulytics.io/assets/docs/WRX986SIHZ-105511938.pdf", "value_in": 1.0}]}, "result_in": 30.0} Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you

Why this value was used

To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you

Why this value was used

To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you

Why this value was used

To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you leave extra space at the back for the water line connections.

Why this value was used

To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side and at the refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your refrigerator has an ice maker, make sure you leave extra space at the back for the water line connections.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). If you are installing your refrigerator next to a fixed wall, leave 33/ 4 " (9.5 cm) on the hinge side (depending on your model) to allow the door to swing open. This space on the hinge side also allows for crisper removal when the door is fully swung open.

Why this value was used

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). If you are installing your refrigerator next to a fixed wall, leave 33/ 4 " (9.5 cm) on the hinge side (depending on your model) to allow the door to swing open. This space on the hinge side also allows for crisper removal when the door is fully swung open.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

3.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511940.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-10-14

3 3/4 in printed for depending on model. Read by the verification agent (run D512753ed9c) from a document naming the model.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

3 3/4 in printed for depending on model. Read by the verification agent (run D512753ed9c) from a document naming the model.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.75 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511940.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Width - Cabinet 353/4" (908

Why this value was used

Width - Cabinet 353/4" (908

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.