Measurement evidence for Whirlpool WRS588FIHB

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105513974.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Product Dimensions (H x W x D) - W 36"

Why this value was used

Product Dimensions (H x W x D) - W 36"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105513979.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Cabinet Overall Height Height Cabinet Height 68⁷⁄₈" 69" cm) 68⁷⁄₈"

Why this value was used

Cabinet Overall Height Height Cabinet Height 68⁷⁄₈" 69" cm) 68⁷⁄₈"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105513979.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Cabinet Width Overall Height 35¹⁄₂" 69" (90.2

Why this value was used

Cabinet Width Overall Height 35¹⁄₂" 69" (90.2

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — response.decoded.json
api.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: WRS588FIHB: Depth Excluding Doors -> 29.625 in
Reviewed: 2026-09-09

WRS588FIHB: Depth Excluding Doors -> 29.625 in

Why this value was used

WRS588FIHB: Depth Excluding Doors -> 29.625 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

32.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105513979.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth without Handle Depth Without Handles 27¹⁄₂" (69.9 32¾" cm)

Why this value was used

Depth without Handle Depth Without Handles 27¹⁄₂" (69.9 32¾" cm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.875 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105513979.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth with Handle Depth - With Handles 29³⁄₄" (75.6 cm) 34⁷⁄₈"

Why this value was used

Depth with Handle Depth - With Handles 29³⁄₄" (75.6 cm) 34⁷⁄₈"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

51.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105513979.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth with Doors Open 90° 511⁄₈"

Why this value was used

Depth with Doors Open 90° 511⁄₈"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105513979.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Normal minimum cabinet cut-out width 36"

Why this value was used

Normal minimum cabinet cut-out width 36"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 69.0 + top_clearance_in

Confidence label: high.

Calculation inputs: Top clearance;

Primary evidence

Whirlpool measurement source — 105513979.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

{"calculation": "69.0 + top_clearance_in", "operands": {"height_hinge_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/measurement-only-replacements/Whirlpool/WRS588FIHB/105513979.pdf", "page": 1, "raw": "Cabinet Width Overall Height 35¹⁄₂\" 69\" (90.2", "source_url": "https://assets.skulytics.io/assets/docs/WRS588FIHB-105513979.pdf", "value_in": 69.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/measurement-only-replacements/Whirlpool/WRS588FIHB/105513974.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - H 69\"", "source_url": "https://assets.skulytics.io/assets/docs/WRS588FIHB-105513974.pdf", "value_in": 69.0}], "top_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/measurement-only-replacements/Whirlpool/WRS588FIHB/105513979.pdf", "page": 1, "raw": "To ensure proper ventilation for your refrigerator, allow for ¹⁄₂\" (1.27 cm) of space on each side LOCATION REQUIREMENTS and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.When installing your", "source_url": "https://assets.skulytics.io/assets/docs/WRS588FIHB-105513979.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/measurement-only-replacements/Whirlpool/WRS588FIHB/105513974.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRS588FIHB-105513974.pdf", "value_in": 0.5}]}, "result_in": 69.5}

Why this value was used

{"calculation": "69.0 + top_clearance_in", "operands": {"height_hinge_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/measurement-only-replacements/Whirlpool/WRS588FIHB/105513979.pdf", "page": 1, "raw": "Cabinet Width Overall Height 35¹⁄₂\" 69\" (90.2", "source_url": "https://assets.skulytics.io/assets/docs/WRS588FIHB-105513979.pdf", "value_in": 69.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/measurement-only-replacements/Whirlpool/WRS588FIHB/105513974.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - H 69\"", "source_url": "https://assets.skulytics.io/assets/docs/WRS588FIHB-105513974.pdf", "value_in": 69.0}], "top_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/measurement-only-replacements/Whirlpool/WRS588FIHB/105513979.pdf", "page": 1, "raw": "To ensure proper ventilation for your refrigerator, allow for ¹⁄₂\" (1.27 cm) of space on each side LOCATION REQUIREMENTS and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.When installing your", "source_url": "https://assets.skulytics.io/assets/docs/WRS588FIHB-105513979.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/measurement-only-replacements/Whirlpool/WRS588FIHB/105513974.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRS588FIHB-105513974.pdf", "value_in": 0.5}]}, "result_in": 69.5} Calculation or inference: 69.0 + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

30.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — response.decoded.json
api.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: {"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cach
Reviewed: 2026-09-09

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/request-cache/702ec09a6ce3f1f7d3a215b30b0a545bf649ea591a4d4dcf73b8b7b57d7cdcef/20260815085807104769/response.decoded.json", "page": "exact-SKU structured row", "raw": "WRS588FIHB: Depth Excluding Doors -> 29.625 in", "source_url": "https://api.skulytics.io/v3/e-commerce/product/specs?brand=Whirlpool&category=Refrigeration&page=6&per_page=100", "value_in": 29.625}], "rear_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/measurement-only-replacements/Whirlpool/WRS588FIHB/105513979.pdf", "page": 1, "raw": "LOCATION REQUIREMENTS and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.When installing your", "source_url": "https://assets.skulytics.io/assets/docs/WRS588FIHB-105513979.pdf", "value_in": 1.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/measurement-only-replacements/Whirlpool/WRS588FIHB/105513974.pdf", "page": 1, "raw": "Allow extra 1\" on rear 1\"", "source_url": "https://assets.skulytics.io/assets/docs/WRS588FIHB-105513974.pdf", "value_in": 1.0}]}, "result_in": 30.625}

Why this value was used

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/request-cache/702ec09a6ce3f1f7d3a215b30b0a545bf649ea591a4d4dcf73b8b7b57d7cdcef/20260815085807104769/response.decoded.json", "page": "exact-SKU structured row", "raw": "WRS588FIHB: Depth Excluding Doors -> 29.625 in", "source_url": "https://api.skulytics.io/v3/e-commerce/product/specs?brand=Whirlpool&category=Refrigeration&page=6&per_page=100", "value_in": 29.625}], "rear_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/measurement-only-replacements/Whirlpool/WRS588FIHB/105513979.pdf", "page": 1, "raw": "LOCATION REQUIREMENTS and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.When installing your", "source_url": "https://assets.skulytics.io/assets/docs/WRS588FIHB-105513979.pdf", "value_in": 1.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/measurement-only-replacements/Whirlpool/WRS588FIHB/105513974.pdf", "page": 1, "raw": "Allow extra 1\" on rear 1\"", "source_url": "https://assets.skulytics.io/assets/docs/WRS588FIHB-105513974.pdf", "value_in": 1.0}]}, "result_in": 30.625} Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105513979.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.27 cm) of space on each side LOCATION REQUIREMENTS and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.When installing your

Why this value was used

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.27 cm) of space on each side LOCATION REQUIREMENTS and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.When installing your

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105513979.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.27 cm) of space on each side LOCATION REQUIREMENTS and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.When installing your

Why this value was used

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.27 cm) of space on each side LOCATION REQUIREMENTS and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.When installing your

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105513979.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.27 cm) of space on each side LOCATION REQUIREMENTS and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.When installing your

Why this value was used

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.27 cm) of space on each side LOCATION REQUIREMENTS and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.When installing your

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105513979.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

LOCATION REQUIREMENTS and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.When installing your

Why this value was used

LOCATION REQUIREMENTS and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.When installing your

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105513979.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). refrigerator next IMPORTANT: to a fixed wall, This leave refrigerator a 2" (5.08 cm) is designed minimum for space indoor on household each side use (depending only. on your model) to allow To ensure the doors proper to swing ventilation open. for your refrigerator, allow for a 1⁄ 2 " (1.27 cm) space on NOTES: each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If

Why this value was used

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). refrigerator next IMPORTANT: to a fixed wall, This leave refrigerator a 2" (5.08 cm) is designed minimum for space indoor on household each side use (depending only. on your model) to allow To ensure the doors proper to swing ventilation open. for your refrigerator, allow for a 1⁄ 2 " (1.27 cm) space on NOTES: each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105513979.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth“F” with Doors Open 90° Cabinet Width 45⁷⁄₈" (116.5 36" cm)

Why this value was used

Depth“F” with Doors Open 90° Cabinet Width 45⁷⁄₈" (116.5 36" cm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.