Measurement evidence for Whirlpool WRS321SDHV

Value used by ExactFit

32.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Product Dimensions (H x W x D) - W 32-3/4"

Why this value was used

Product Dimensions (H x W x D) - W 32-3/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511829.pdf
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Height to Top of Cabinet C: 65 5/8" (166.69 cm)

Why this value was used

Height to Top of Cabinet C: 65 5/8" (166.69 cm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — response.decoded.json
api.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: WRS321SDHV: Height To Top Of Door Hinge -> 66.25 in
Reviewed: 2026-09-09

WRS321SDHV: Height To Top Of Door Hinge -> 66.25 in

Why this value was used

WRS321SDHV: Height To Top Of Door Hinge -> 66.25 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — response.decoded.json
api.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: WRS321SDHV: Depth Excluding Doors -> 28 in
Reviewed: 2026-09-09

WRS321SDHV: Depth Excluding Doors -> 28 in

Why this value was used

WRS321SDHV: Depth Excluding Doors -> 28 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511829.pdf
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Depth Without Handles A: 31 5/8" (80.33 cm)

Why this value was used

Depth Without Handles A: 31 5/8" (80.33 cm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511829.pdf
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

Depth With Handles B: 33 5/8" (85.41 cm)

Why this value was used

Depth With Handles B: 33 5/8" (85.41 cm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49.3125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth with Door Open 90° 49-5/16"

Why this value was used

Depth with Door Open 90° 49-5/16"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511796.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-09

Normal minimum cabinet cut-out width required for product installation 36"

Why this value was used

Normal minimum cabinet cut-out width required for product installation 36"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

67.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 66.625 + top_clearance_in

Confidence label: high.

Calculation inputs: Top clearance;

Primary evidence

Whirlpool measurement source — 105511792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

{"calculation": "66.625 + top_clearance_in", "operands": {"top_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-new-20260814/documents/Whirlpool/WRS321SDHV/105511792.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRS321SDHV-105511792.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-new-20260814/documents/Whirlpool/WRS321SDHV/105511796.pdf", "page": 7, "raw": "Space at the top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRS321SDHV-105511796.pdf", "value_in": 0.5}]}, "result_in": 67.125}

Why this value was used

{"calculation": "66.625 + top_clearance_in", "operands": {"top_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-new-20260814/documents/Whirlpool/WRS321SDHV/105511792.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRS321SDHV-105511792.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-new-20260814/documents/Whirlpool/WRS321SDHV/105511796.pdf", "page": 7, "raw": "Space at the top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRS321SDHV-105511796.pdf", "value_in": 0.5}]}, "result_in": 67.125} Calculation or inference: 66.625 + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — response.decoded.json
api.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: {"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cach
Reviewed: 2026-09-09

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/request-cache/735d9a7ff299beadaaf0e72906943bdd2325909903153584ab6166a61ac7c0a6/20260814081515337851/response.decoded.json", "page": "exact-SKU structured row", "raw": "WRS321SDHV: Depth Excluding Doors -> 28 in", "source_url": "https://api.skulytics.io/v3/e-commerce/product/specs?brand=Whirlpool&category=Refrigeration&page=3&per_page=100", "value_in": 28.0}], "rear_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-new-20260814/documents/Whirlpool/WRS321SDHV/105511792.pdf", "page": 1, "raw": "Allow extra 1\" on rear 1\"", "source_url": "https://assets.skulytics.io/assets/docs/WRS321SDHV-105511792.pdf", "value_in": 1.0}]}, "result_in": 29.0}

Why this value was used

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/request-cache/735d9a7ff299beadaaf0e72906943bdd2325909903153584ab6166a61ac7c0a6/20260814081515337851/response.decoded.json", "page": "exact-SKU structured row", "raw": "WRS321SDHV: Depth Excluding Doors -> 28 in", "source_url": "https://api.skulytics.io/v3/e-commerce/product/specs?brand=Whirlpool&category=Refrigeration&page=3&per_page=100", "value_in": 28.0}], "rear_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-new-20260814/documents/Whirlpool/WRS321SDHV/105511792.pdf", "page": 1, "raw": "Allow extra 1\" on rear 1\"", "source_url": "https://assets.skulytics.io/assets/docs/WRS321SDHV-105511792.pdf", "value_in": 1.0}]}, "result_in": 29.0} Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Allow extra 1/2" on sides and top 1/2"

Why this value was used

Allow extra 1/2" on sides and top 1/2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Allow extra 1/2" on sides and top 1/2"

Why this value was used

Allow extra 1/2" on sides and top 1/2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Allow extra 1/2" on sides and top 1/2"

Why this value was used

Allow extra 1/2" on sides and top 1/2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Allow extra 1" on rear 1"

Why this value was used

Allow extra 1" on rear 1"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511796.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). Fixed-wall clearance on each side 2 in to allow doors to swing open

Why this value was used

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). Fixed-wall clearance on each side 2 in to allow doors to swing open

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.75 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511792.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Product Dimensions (H x W x D) - W 32-3/4"

Why this value was used

Product Dimensions (H x W x D) - W 32-3/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.