Measurement evidence for Whirlpool WRF535SWHV

Value used by ExactFit

35.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511682.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Product Dimensions (H x W x D) - W 35-5/8"

Why this value was used

Product Dimensions (H x W x D) - W 35-5/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Height - Top of Cabinet 687⁄8"

Why this value was used

Height - Top of Cabinet 687⁄8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Height - Overall 701⁄8"

Why this value was used

Height - Overall 701⁄8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth - Cabinet Only 291⁄8"

Why this value was used

Depth - Cabinet Only 291⁄8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth - Without Handles 33"

Why this value was used

Depth - Without Handles 33"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth - With Handles 351⁄2"

Why this value was used

Depth - With Handles 351⁄2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

48.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth - Doors Open 90° 481⁄8"

Why this value was used

Depth - Doors Open 90° 481⁄8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * side_ventilation_clearance_in

Confidence label: high.

Calculation inputs: Overall width; Left-side ventilation clearance;

Primary evidence

Whirlpool measurement source — 105511682.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

{"calculation": "width_doors_closed_in + 2 * side_ventilation_clearance_in", "operands": {"side_ventilation_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511685.pdf", "page": 1, "raw": "To ensure proper ventilation for your refrigerator, allow for a 1⁄2\" (1.25 cm) space on each side and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511685.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511682.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511682.pdf", "value_in": 0.5}], "width_doors_closed_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511682.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - W 35-5/8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511682.pdf", "value_in": 35.625}]}, "result_in": 36.625}

Why this value was used

{"calculation": "width_doors_closed_in + 2 * side_ventilation_clearance_in", "operands": {"side_ventilation_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511685.pdf", "page": 1, "raw": "To ensure proper ventilation for your refrigerator, allow for a 1⁄2\" (1.25 cm) space on each side and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511685.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511682.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511682.pdf", "value_in": 0.5}], "width_doors_closed_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511682.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - W 35-5/8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511682.pdf", "value_in": 35.625}]}, "result_in": 36.625} Calculation or inference: width_doors_closed_in + 2 * side_ventilation_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 70.125 + top_clearance_in

Confidence label: high.

Calculation inputs: Top clearance;

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

{"calculation": "70.125 + top_clearance_in", "operands": {"height_hinge_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511685.pdf", "page": 1, "raw": "Height - Overall 701⁄8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511685.pdf", "value_in": 70.125}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511682.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - H 70-1/8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511682.pdf", "value_in": 70.125}], "top_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511685.pdf", "page": 1, "raw": "To ensure proper ventilation for your refrigerator, allow for a 1⁄2\" (1.25 cm) space on each side and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511685.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511682.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511682.pdf", "value_in": 0.5}]}, "result_in": 70.625}

Why this value was used

{"calculation": "70.125 + top_clearance_in", "operands": {"height_hinge_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511685.pdf", "page": 1, "raw": "Height - Overall 701⁄8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511685.pdf", "value_in": 70.125}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511682.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - H 70-1/8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511682.pdf", "value_in": 70.125}], "top_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511685.pdf", "page": 1, "raw": "To ensure proper ventilation for your refrigerator, allow for a 1⁄2\" (1.25 cm) space on each side and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511685.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511682.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511682.pdf", "value_in": 0.5}]}, "result_in": 70.625} Calculation or inference: 70.125 + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

30.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511685.pdf", "page": 1, "raw": "Depth - Cabinet Only 291⁄8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511685.pdf", "value_in": 29.125}], "rear_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511685.pdf", "page": 1, "raw": "and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511685.pdf", "value_in": 1.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511682.pdf", "page": 1, "raw": "Allow extra 1\" on rear 1\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511682.pdf", "value_in": 1.0}]}, "result_in": 30.125}

Why this value was used

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511685.pdf", "page": 1, "raw": "Depth - Cabinet Only 291⁄8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511685.pdf", "value_in": 29.125}], "rear_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511685.pdf", "page": 1, "raw": "and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511685.pdf", "value_in": 1.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF535SWHV/105511682.pdf", "page": 1, "raw": "Allow extra 1\" on rear 1\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF535SWHV-105511682.pdf", "value_in": 1.0}]}, "result_in": 30.125} Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, allow for a 1⁄2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Why this value was used

To ensure proper ventilation for your refrigerator, allow for a 1⁄2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, allow for a 1⁄2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Why this value was used

To ensure proper ventilation for your refrigerator, allow for a 1⁄2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, allow for a 1⁄2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Why this value was used

To ensure proper ventilation for your refrigerator, allow for a 1⁄2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Why this value was used

and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.5 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). If you are installing your refrigerator next to a fixed wall, leave 21⁄ 2 " (6.3 cm) minimum on the hinge side (some models require more) to allow for the door to swing open. NOTE: This refrigerator is intended for use in a location where the temperature ranges from a

Why this value was used

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (door angle not stated, 6 in or less). If you are installing your refrigerator next to a fixed wall, leave 21⁄ 2 " (6.3 cm) minimum on the hinge side (some models require more) to allow for the door to swing open. NOTE: This refrigerator is intended for use in a location where the temperature ranges from a

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105511685.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Width - Cabinet 355⁄8"

Why this value was used

Width - Cabinet 355⁄8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.