Measurement evidence for Whirlpool WRF532SMHZ

Value used by ExactFit

32.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512321.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Product Dimensions (H x W x D) - W 32-5/8"

Why this value was used

Product Dimensions (H x W x D) - W 32-5/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

- Top of “B” 687⁄8"

Why this value was used

- Top of “B” 687⁄8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

“A” (178.1 701⁄8"

Why this value was used

“A” (178.1 701⁄8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

- Cabinet “G” 281/8"

Why this value was used

- Cabinet “G” 281/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

32 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

- Without “F” 32"

Why this value was used

- Without “F” 32"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

- With “E” 341/2"

Why this value was used

- With “E” 341/2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

47.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

- Doors Open 90° “C” 471⁄8"

Why this value was used

- Doors Open 90° “C” 471⁄8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * side_ventilation_clearance_in

Confidence label: high.

Calculation inputs: Overall width; Left-side ventilation clearance;

Primary evidence

Whirlpool measurement source — 105512321.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

{"calculation": "width_doors_closed_in + 2 * side_ventilation_clearance_in", "operands": {"side_ventilation_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512322.pdf", "page": 2, "raw": "To ensure proper ventilation for your refrigerator, allow for a 1/2\" (1.25 cm) space on each side and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512322.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512321.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512321.pdf", "value_in": 0.5}], "width_doors_closed_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512321.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - W 32-5/8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512321.pdf", "value_in": 32.625}]}, "result_in": 33.625}

Why this value was used

{"calculation": "width_doors_closed_in + 2 * side_ventilation_clearance_in", "operands": {"side_ventilation_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512322.pdf", "page": 2, "raw": "To ensure proper ventilation for your refrigerator, allow for a 1/2\" (1.25 cm) space on each side and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512322.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512321.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512321.pdf", "value_in": 0.5}], "width_doors_closed_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512321.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - W 32-5/8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512321.pdf", "value_in": 32.625}]}, "result_in": 33.625} Calculation or inference: width_doors_closed_in + 2 * side_ventilation_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 70.125 + top_clearance_in

Confidence label: high.

Calculation inputs: Top clearance;

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

{"calculation": "70.125 + top_clearance_in", "operands": {"height_hinge_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512322.pdf", "page": 1, "raw": "“A” (178.1 701⁄8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512322.pdf", "value_in": 70.125}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512321.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - H 70-1/8", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512321.pdf", "value_in": 70.125}], "top_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512322.pdf", "page": 2, "raw": "To ensure proper ventilation for your refrigerator, allow for a 1/2\" (1.25 cm) space on each side and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512322.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512321.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512321.pdf", "value_in": 0.5}]}, "result_in": 70.625}

Why this value was used

{"calculation": "70.125 + top_clearance_in", "operands": {"height_hinge_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512322.pdf", "page": 1, "raw": "“A” (178.1 701⁄8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512322.pdf", "value_in": 70.125}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512321.pdf", "page": 1, "raw": "Product Dimensions (H x W x D) - H 70-1/8", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512321.pdf", "value_in": 70.125}], "top_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512322.pdf", "page": 2, "raw": "To ensure proper ventilation for your refrigerator, allow for a 1/2\" (1.25 cm) space on each side and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512322.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512321.pdf", "page": 1, "raw": "Allow extra 1/2\" on sides and top 1/2\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512321.pdf", "value_in": 0.5}]}, "result_in": 70.625} Calculation or inference: 70.125 + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512322.pdf", "page": 1, "raw": "- Cabinet “G” 281/8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512322.pdf", "value_in": 28.125}], "rear_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512322.pdf", "page": 2, "raw": "To ensure proper ventilation for your refrigerator, allow for a 1/2\" (1.25 cm) space on each side and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections. If you are installing your refrigerator next to a fixed wall, leave 21⁄ \" (6.3 cm) minimum on the hinge side (some models require more) to allow for the door", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512322.pdf", "value_in": 1.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512321.pdf", "page": 1, "raw": "Allow extra 1\" on rear 1\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512321.pdf", "value_in": 1.0}]}, "result_in": 29.125}

Why this value was used

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512322.pdf", "page": 1, "raw": "- Cabinet “G” 281/8\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512322.pdf", "value_in": 28.125}], "rear_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512322.pdf", "page": 2, "raw": "To ensure proper ventilation for your refrigerator, allow for a 1/2\" (1.25 cm) space on each side and at the top. Allow for 1\" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections. If you are installing your refrigerator next to a fixed wall, leave 21⁄ \" (6.3 cm) minimum on the hinge side (some models require more) to allow for the door", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512322.pdf", "value_in": 1.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/Whirlpool/WRF532SMHZ/105512321.pdf", "page": 1, "raw": "Allow extra 1\" on rear 1\"", "source_url": "https://assets.skulytics.io/assets/docs/WRF532SMHZ-105512321.pdf", "value_in": 1.0}]}, "result_in": 29.125} Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, allow for a 1/2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Why this value was used

To ensure proper ventilation for your refrigerator, allow for a 1/2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, allow for a 1/2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Why this value was used

To ensure proper ventilation for your refrigerator, allow for a 1/2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, allow for a 1/2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Why this value was used

To ensure proper ventilation for your refrigerator, allow for a 1/2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-09

To ensure proper ventilation for your refrigerator, allow for a 1/2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections. If you are installing your refrigerator next to a fixed wall, leave 21⁄ " (6.3 cm) minimum on the hinge side (some models require more) to allow for the door

Why this value was used

To ensure proper ventilation for your refrigerator, allow for a 1/2" (1.25 cm) space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections. If you are installing your refrigerator next to a fixed wall, leave 21⁄ " (6.3 cm) minimum on the hinge side (some models require more) to allow for the door

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.5 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512322.pdf
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-24

Minimum space to allow the door to swing open: 2 1/2 in; the document does not state the door angle and the value is under 6 in, so it is the 90 degree clearance.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

Minimum space to allow the door to swing open: 2 1/2 in; the document does not state the door angle and the value is under 6 in, so it is the 90 degree clearance.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

2.5 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization:

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-17

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (fully open). If you are installing your refrigerator next to a fixed wall, leave 21⁄ 2 " (6.3 cm) minimum on the hinge side (some models require more) to allow for the door to swing open. NOTE: This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The

Why this value was used

Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (fully open). If you are installing your refrigerator next to a fixed wall, leave 21⁄ 2 " (6.3 cm) minimum on the hinge side (some models require more) to allow for the door to swing open. NOTE: This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — 105512322.pdf
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

“H” (82.9 325⁄8"

Why this value was used

“H” (82.9 325⁄8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.