This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
French door · standard-depth
Market status: Reviewed (recorded 2026-08-17)
Last reviewed: 2026-09-17. 3 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | 35.75 in | ✓ Verified — retained secondary source | GE measurement source — 105164984.pdf assets.skulytics.io | Page 1 | |
Value used by ExactFit35.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE measurement source — 105164984.pdf Width (in.) H 35-3/4Open original source ↗ Why this value was usedWidth (in.) H 35-3/4 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | 69 in | ✓ Verified — retained secondary source | GE measurement source — 105164984.pdf assets.skulytics.io | Page 1 | |
Value used by ExactFit69 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE measurement source — 105164984.pdf Height to top of case (in.) C 69Open original source ↗ Why this value was usedHeight to top of case (in.) C 69 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 69.875 in | ✓ Verified — retained secondary source | GE measurement source — 105164984.pdf assets.skulytics.io | Page 1 | |
Value used by ExactFit69.875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE measurement source — 105164984.pdf Height to top of hinge (in.) B 69-7/8Open original source ↗ Why this value was usedHeight to top of hinge (in.) B 69-7/8 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | 29.375 in | ✓ Verified — retained secondary source | GE measurement source — 105164984.pdf assets.skulytics.io | Page 1 | |
Value used by ExactFit29.375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE measurement source — 105164984.pdf Case depth without door (in.) D 29-3/8Open original source ↗ Why this value was usedCase depth without door (in.) D 29-3/8 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 33.75 in | ✓ Verified — retained secondary source | GE measurement source — 105164984.pdf assets.skulytics.io | Page 1 | |
Value used by ExactFit33.75 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE measurement source — 105164984.pdf Case depth less door handle (in.) E 33-3/4Open original source ↗ Why this value was usedCase depth less door handle (in.) E 33-3/4 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 36.25 in | ✓ Verified — retained secondary source | GE measurement source — 105164984.pdf assets.skulytics.io | Page 1 | |
Value used by ExactFit36.25 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE measurement source — 105164984.pdf Case depth with door handle (in.) F 36-1/4Open original source ↗ Why this value was usedCase depth with door handle (in.) F 36-1/4 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 48.375 in | ✓ Verified — retained secondary source | GE measurement source — 105164984.pdf assets.skulytics.io | Page 1 | |
Value used by ExactFit48.375 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE measurement source — 105164984.pdf Depth with fresh food door open 90° (in.) G 48-3/8Open original source ↗ Why this value was usedDepth with fresh food door open 90° (in.) G 48-3/8 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | 36 in | ✓ Verified — retained secondary source | GE installation document — 6dbcf7a5193b36634b5a6fe7f25c770e9d9afc5757434e9abf201e7478d35c4b.pdf images.salsify.com | Page 36 | |
Value used by ExactFit36 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE installation document — 6dbcf7a5193b36634b5a6fe7f25c770e9d9afc5757434e9abf201e7478d35c4b.pdf Width, W, should not be less than 36".Open original source ↗ Why this value was usedWidth, W, should not be less than 36". Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | 70.875 in | ✓ Verified — retained secondary source · Calculated/inferred | GE measurement source — product-page.html assets.skulytics.io | Retained specification excerpt: GE additive installation-envelope calculation from high-confidence operands: height_hinge_in=69.875, | |
Value used by ExactFit70.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: height_hinge_in + top_clearance_in Confidence label: high. Calculation inputs: Height with hinge / controlling height; Top clearance; Primary evidenceGE measurement source — product-page.html GE additive installation-envelope calculation from high-confidence operands: height_hinge_in=69.875, top_clearance_in=1; result=70.875 in.Open original source ↗ All retained supporting links
Why this value was usedGE additive installation-envelope calculation from high-confidence operands: height_hinge_in=69.875, top_clearance_in=1; result=70.875 in. Calculation or inference: height_hinge_in + top_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | 31.375 in | ✓ Verified — retained secondary source · Calculated/inferred | GE measurement source — product-page.html assets.skulytics.io | Retained specification excerpt: {"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cach | |
Value used by ExactFit31.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: high. Calculation inputs: Depth without door; Rear clearance; Primary evidenceGE measurement source — product-page.html {"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/GE/GNE29GYNFS/105164984.pdf", "page": 1, "raw": "Case depth without door (in.) D 29-3/8", "source_url": "https://assets.skulytics.io/assets/docs/GNE29GYNFS-105164984.pdf", "value_in": 29.375}], "rear_clearance_in": [{"cache_path": "data/sources/GE/GNE29GYNFS/product-page.html", "page": "Weights & Dimensions structured product data", "raw": "Back Air Clearances -> 2 in", "source_url": "https://www.geappliances.com/appliance/GE-ENERGY-STAR-28-7-Cu-Ft-Fingerprint-Resistant-French-Door-Refrigerator-GNE29GYNFS", "value_in": 2.0}]}, "result_in": 31.375}Open original source ↗ All retained supporting links
Why this value was used{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-second-new-20260815/documents/GE/GNE29GYNFS/105164984.pdf", "page": 1, "raw": "Case depth without door (in.) D 29-3/8", "source_url": "https://assets.skulytics.io/assets/docs/GNE29GYNFS-105164984.pdf", "value_in": 29.375}], "rear_clearance_in": [{"cache_path": "data/sources/GE/GNE29GYNFS/product-page.html", "page": "Weights & Dimensions structured product data", "raw": "Back Air Clearances -> 2 in", "source_url": "https://www.geappliances.com/appliance/GE-ENERGY-STAR-28-7-Cu-Ft-Fingerprint-Resistant-French-Door-Refrigerator-GNE29GYNFS", "value_in": 2.0}]}, "result_in": 31.375} Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | 0.125 in | ✓ Verified — exact model | GE measurement source — product-page.html GE | Retained specification excerpt: Side Air Clearances -> 1/8 in | |
Value used by ExactFit0.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE measurement source — product-page.html Side Air Clearances -> 1/8 inOpen original source ↗ Why this value was usedSide Air Clearances -> 1/8 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | 0.125 in | ✓ Verified — exact model | GE measurement source — product-page.html GE | Retained specification excerpt: Side Air Clearances -> 1/8 in | |
Value used by ExactFit0.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE measurement source — product-page.html Side Air Clearances -> 1/8 inOpen original source ↗ Why this value was usedSide Air Clearances -> 1/8 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | 1 in | ✓ Verified — exact model | GE measurement source — product-page.html GE | Retained specification excerpt: Top Air Clearances -> 1 in | |
Value used by ExactFit1 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE measurement source — product-page.html Top Air Clearances -> 1 inOpen original source ↗ Why this value was usedTop Air Clearances -> 1 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | 2 in | ✓ Verified — exact model | GE measurement source — product-page.html GE | Retained specification excerpt: Back Air Clearances -> 2 in | |
Value used by ExactFit2 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE measurement source — product-page.html Back Air Clearances -> 2 inOpen original source ↗ Why this value was usedBack Air Clearances -> 2 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Wall clearance for door open to 90° | Unknown | ? Not found | Source not recorded Publisher not recorded | Exact location not retained | |
Value used by ExactFitUnknown · Fit role: Operating clearance. Primary evidenceSource not recorded No retained excerpt is available. The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above. Why this value was usedNo evidence decision recorded. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Wall clearance for fully open door | 16.375 in | ✓ Verified — retained secondary source | GE measurement source — 105164984.pdf assets.skulytics.io | Page 1 | |
Value used by ExactFit16.375 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: Confidence label: high. Primary evidenceGE measurement source — 105164984.pdf Migrated from hinge_side_wall_clearance_in+side_clearance_wall_in (fully open). Min distance between side of case and wall, in either direction, to allow doors to open fully: 16 3/8 inOpen original source ↗ Why this value was usedMigrated from hinge_side_wall_clearance_in+side_clearance_wall_in (fully open). Min distance between side of case and wall, in either direction, to allow doors to open fully: 16 3/8 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | 35.75 in | ✓ Verified — retained secondary source | GE measurement source — 105164984.pdf assets.skulytics.io | Page 1 | |
Value used by ExactFit35.75 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceGE measurement source — 105164984.pdf Width (in.) H 35-3/4Open original source ↗ Why this value was usedWidth (in.) H 35-3/4 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Not found for safe fit use. Sources retained: None. No rejected related-model candidate is identified in the retained record.
No evidence decision recorded.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
assets.skulytics.io · Web source · secondary model/source
Model numbers covered: GNE29GYNFS. Publication/revision date: Not recorded. Reviewed: 2026-09-09.
9 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Wall clearance for fully open door; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗images.salsify.com · Installation manual · secondary model/source
Model numbers covered: GNE29GYNFS. Publication/revision date: Not recorded. Reviewed: 2026-09-09.
1 displayed measurements supported: Minimum cutout width.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗GE · Web source · exact model/source
Model numbers covered: GNE29GYNFS. Publication/revision date: Not recorded. Reviewed: 2026-09-09.
6 displayed measurements supported: Minimum cutout height; Minimum cutout depth; Left-side ventilation clearance; Right-side ventilation clearance; Top clearance; Rear clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Evidence reflects the sources reviewed on 2026-09-17. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.