Measurement evidence for GE GDE03GGKBB

Value used by ExactFit

18.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — web-92de7e9729.pdf
GE · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-15

GE Quick Specs (GDE03GGK), Overall Dimensions: Width (B) 18-5/8 (no separate door width printed).

Why this value was used

GE Quick Specs (GDE03GGK), Overall Dimensions: Width (B) 18-5/8 (no separate door width printed).

Other evidence found

• 18.75 in — superseded

  docs/provider-evaluation/raw/pilot41-official-web-20260908/GE/GDE03GGKBB/source.html; page 1. Model scope: not separately recorded. Raw value: Overall Width -> 18 3/4 in. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

32 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — source.html
GE · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Height to Top of Case -> 32 in

Why this value was used

Height to Top of Case -> 32 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — source.html
GE · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Height to Top of Hinge -> 33.375 in

Why this value was used

Height to Top of Hinge -> 33.375 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

17.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — source.html
GE · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Case Depth Without Door -> 17.5 in

Why this value was used

Case Depth Without Door -> 17.5 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

19.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — source.html
GE · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth Without Handle -> 19.5 in

Why this value was used

Depth Without Handle -> 19.5 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

20.125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — source.html
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Overall Depth -> 20 1/8 in

Why this value was used

Overall Depth -> 20 1/8 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

37 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — source.html
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Depth with Door Open 90° -> 37 in

Why this value was used

Depth with Door Open 90° -> 37 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

19.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in + 2 * side_ventilation_clearance_in

Confidence label: high.

Calculation inputs: Left-side ventilation clearance; Cabinet case width;

Primary evidence

GE measurement source — source.html
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Recalculated 2026-10-15 with the stored formula from current inputs: case_width_in + 2 * side_ventil
Reviewed: 2026-10-15

Recalculated 2026-10-15 with the stored formula from current inputs: case_width_in + 2 * side_ventilation_clearance_in with case_width_in = 18.625, side_ventilation_clearance_in = 0.5 = 19.625 in (previously 19.75 in).

Why this value was used

Recalculated 2026-10-15 with the stored formula from current inputs: case_width_in + 2 * side_ventilation_clearance_in with case_width_in = 18.625, side_ventilation_clearance_in = 0.5 = 19.625 in (previously 19.75 in). Calculation or inference: case_width_in + 2 * side_ventilation_clearance_in.

Other evidence found

• 19.75 in — superseded

  docs/provider-evaluation/raw/pilot41-official-web-20260908/GE/GDE03GGKBB/source.html; page 1. Model scope: not separately recorded. Raw value: {"calculation": "width_doors_closed_in + 2 * side_ventilation_clearance_in", "operands": {"side_ventilation_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-new-20260814/documents/GE/GDE03GGKBB/105164685.pdf", "page": 7, "raw": "Sides 1/2” (13 mm)", "source_url": "https://assets.skulytics.io/assets/docs/GDE03GGKBB-105164685.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-new-20260814/documents/GE/GDE03GGKBB/105164683.pdf", "page": 1, "raw": "Each side (in.) 1/2", "source_url": "https://assets.skulytics.io/assets/docs/GDE03GGKBB-105164683.pdf", "value_in": 0.5}, {"cache_path": "docs/provider-evaluation/raw/pilot41-official-web-20260908/GE/GDE03GGKBB/source.html", "page": 1, "raw": "Side Air Clearances -> 1/2 in", "source_url": "https://www.geappliances.com/appliance/GE-ENERGY-STAR-Double-Door-Compact-Refrigerator-GDE03GGKBB", "value_in": 0.5}], "width_doors_closed_in": [{"cache_path": "docs/provider-evaluation/raw/pilot41-official-web-20260908/GE/GDE03GGKBB/source.html", "page": 1, "raw": "Overall Width -> 18 3/4 in", "source_url": "https://www.geappliances.com/appliance/GE-ENERGY-STAR-Double-Door-Compact-Refrigerator-GDE03GGKBB", "value_in": 18.75}]}, "result_in": 19.75}. The final reviewed registry supersedes this earlier audit value.

• 19.75 in — superseded

  docs/provider-evaluation/raw/pilot41-official-web-20260908/GE/GDE03GGKBB/source.html; location not retained. Model scope: not separately recorded. Raw value: GE additive installation-envelope calculation from high-confidence operands: case_width_in=18.75, side_ventilation_clearance_in=0.5; result=19.75 in.. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

35.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: height_hinge_in + top_clearance_in

Confidence label: high.

Calculation inputs: Height with hinge / controlling height; Top clearance;

Primary evidence

GE measurement source — source.html
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: GE additive installation-envelope calculation from high-confidence operands: height_hinge_in=33.375,
Reviewed: 2026-09-09

GE additive installation-envelope calculation from high-confidence operands: height_hinge_in=33.375, top_clearance_in=2; result=35.375 in.

Why this value was used

GE additive installation-envelope calculation from high-confidence operands: height_hinge_in=33.375, top_clearance_in=2; result=35.375 in. Calculation or inference: height_hinge_in + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

19.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: high.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

GE measurement source — source.html
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/pilot41-official-web-20260908/GE/GDE03GGKBB/source.html", "page": 1, "raw": "Case Depth Without Door -> 17.5 in", "source_url": "https://www.geappliances.com/appliance/GE-ENERGY-STAR-Double-Door-Compact-Refrigerator-GDE03GGKBB", "value_in": 17.5}], "rear_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-new-20260814/documents/GE/GDE03GGKBB/105164685.pdf", "page": 7, "raw": "Back 2” (51 mm)**", "source_url": "https://assets.skulytics.io/assets/docs/GDE03GGKBB-105164685.pdf", "value_in": 2.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-new-20260814/documents/GE/GDE03GGKBB/105164683.pdf", "page": 1, "raw": "Back (in.) 2", "source_url": "https://assets.skulytics.io/assets/docs/GDE03GGKBB-105164683.pdf", "value_in": 2.0}, {"cache_path": "docs/provider-evaluation/raw/pilot41-official-web-20260908/GE/GDE03GGKBB/source.html", "page": 1, "raw": "Back Air Clearances -> 2 in", "source_url": "https://www.geappliances.com/appliance/GE-ENERGY-STAR-Double-Door-Compact-Refrigerator-GDE03GGKBB", "value_in": 2.0}]}, "result_in": 19.5}

Why this value was used

{"calculation": "depth_case_only_in + rear_clearance_in", "operands": {"depth_case_only_in": [{"cache_path": "docs/provider-evaluation/raw/pilot41-official-web-20260908/GE/GDE03GGKBB/source.html", "page": 1, "raw": "Case Depth Without Door -> 17.5 in", "source_url": "https://www.geappliances.com/appliance/GE-ENERGY-STAR-Double-Door-Compact-Refrigerator-GDE03GGKBB", "value_in": 17.5}], "rear_clearance_in": [{"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-new-20260814/documents/GE/GDE03GGKBB/105164685.pdf", "page": 7, "raw": "Back 2” (51 mm)**", "source_url": "https://assets.skulytics.io/assets/docs/GDE03GGKBB-105164685.pdf", "value_in": 2.0}, {"cache_path": "docs/provider-evaluation/raw/skulytics/document-test-corpus-new-20260814/documents/GE/GDE03GGKBB/105164683.pdf", "page": 1, "raw": "Back (in.) 2", "source_url": "https://assets.skulytics.io/assets/docs/GDE03GGKBB-105164683.pdf", "value_in": 2.0}, {"cache_path": "docs/provider-evaluation/raw/pilot41-official-web-20260908/GE/GDE03GGKBB/source.html", "page": 1, "raw": "Back Air Clearances -> 2 in", "source_url": "https://www.geappliances.com/appliance/GE-ENERGY-STAR-Double-Door-Compact-Refrigerator-GDE03GGKBB", "value_in": 2.0}]}, "result_in": 19.5} Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — source.html
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Side Air Clearances -> 1/2 in

Why this value was used

Side Air Clearances -> 1/2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — source.html
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Side Air Clearances -> 1/2 in

Why this value was used

Side Air Clearances -> 1/2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — source.html
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Top Air Clearances -> 2 in

Why this value was used

Top Air Clearances -> 2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — source.html
assets.skulytics.io · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-09

Back Air Clearances -> 2 in

Why this value was used

Back Air Clearances -> 2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Primary evidence

Source not recorded
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Exact location not retained
Reviewed: Not recorded

No retained excerpt is available.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

No evidence decision recorded.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

18.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

GE measurement source — web-92de7e9729.pdf
GE · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-10-15

GE Quick Specs (GDE03GGK), Overall Dimensions: Width (B) 18-5/8. Replaces a web-page figure.

Why this value was used

GE Quick Specs (GDE03GGK), Overall Dimensions: Width (B) 18-5/8. Replaces a web-page figure.

Other evidence found

• 18.75 in — superseded

  docs/provider-evaluation/raw/pilot41-official-web-20260908/GE/GDE03GGKBB/source.html; page 1. Model scope: not separately recorded. Raw value: Overall Width -> 18 3/4 in. The final reviewed registry supersedes this earlier audit value.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.