Measurement evidence for Whirlpool WRTX5118TW

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Whirlpool WRTX5118TW fit check Check this model against your opening How ExactFit verifies measurements

Whirlpool WRTX5118TW

Top Freezer · Standard-depth
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Complete mixed evidence

1exact-model manufacturer values

0verified equivalent/same-chassis values

12secondary-source-only values

3values with unresolved source details

Last reviewed: 2026-09-05. 6 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	27.938 in	✓ Secondary source only	Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com	Retained specification excerpt: net Width = 27.938 in \| https://www.ajmadison.com/pages/builder_form/) ## Specifications Dimensions
Value used by ExactFit 27.938 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: net Width = 27.938 in \| https://www.ajmadison.com/pages/builder_form/) ## Specifications Dimensions Reviewed: 2026-09-04 net Width = 27.938 in \| https://www.ajmadison.com/pages/builder_form/) ## Specifications Dimensions Cabinet Width: 27.938 in Depth: 29.4375 in Depth Closed Excluding Handles: 29.438 in Depth Closed Includ Open original source ↗ Why this value was used net Width = 27.938 in \| https://www.ajmadison.com/pages/builder_form/) ## Specifications Dimensions Cabinet Width: 27.938 in Depth: 29.4375 in Depth Closed Excluding Handles: 29.438 in Depth Closed Includ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	67.375 in	✓ Secondary source only	Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com	Retained specification excerpt: Height without Hinge = 67.375 in \| ut Door: 25 19/100 Inch Depth with Door at 90°: 54 1/2 Inch Heigh
Value used by ExactFit 67.375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Height without Hinge = 67.375 in \| ut Door: 25 19/100 Inch Depth with Door at 90°: 54 1/2 Inch Heigh Reviewed: 2026-09-04 Height without Hinge = 67.375 in \| ut Door: 25 19/100 Inch Depth with Door at 90°: 54 1/2 Inch Height: 68 1/2 Inch Height without Hinges: 67 3/8 Inch Shabbos Compliance Sabbath Mode: No Smart WiFi: No Remote Diagnostics: No AI Open original source ↗ Why this value was used Height without Hinge = 67.375 in \| ut Door: 25 19/100 Inch Depth with Door at 90°: 54 1/2 Inch Height: 68 1/2 Inch Height without Hinges: 67 3/8 Inch Shabbos Compliance Sabbath Mode: No Smart WiFi: No Remote Diagnostics: No AI Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	68 in	✓ Secondary source only	Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com	Retained specification excerpt: Height To Top Of Door Hinge = 68.0 in \| . ft. Gross Weight: 163 lbs Height: 68.5 in Height To Top Of
Value used by ExactFit 68 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Door Hinge = 68.0 in \| . ft. Gross Weight: 163 lbs Height: 68.5 in Height To Top Of Reviewed: 2026-09-04 Height To Top Of Door Hinge = 68.0 in \| . ft. Gross Weight: 163 lbs Height: 68.5 in Height To Top Of Cabinet: 67.375 in Height To Top Of Door Hinge: 68 in Net Weight: 158 lbs Refrigerator Capacity Volume: 13.66 cu. ft. Total Refrigera \| independent cached support: ajmadison.com, homedepot.com Open original source ↗ Why this value was used Height To Top Of Door Hinge = 68.0 in \| . ft. Gross Weight: 163 lbs Height: 68.5 in Height To Top Of Cabinet: 67.375 in Height To Top Of Door Hinge: 68 in Net Weight: 158 lbs Refrigerator Capacity Volume: 13.66 cu. ft. Total Refrigera \| independent cached support: ajmadison.com, homedepot.com Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	25.188 in	✓ Secondary source only	Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com	Retained specification excerpt: Depth Excluding Doors = 25.188 in \| h Closed Excluding Handles: 29.438 in Depth Closed Including Han
Value used by ExactFit 25.188 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Excluding Doors = 25.188 in \| h Closed Excluding Handles: 29.438 in Depth Closed Including Han Reviewed: 2026-09-04 Depth Excluding Doors = 25.188 in \| h Closed Excluding Handles: 29.438 in Depth Closed Including Handles: 29.438 in Depth Excluding Doors: 25.188 in Depth With Door Open 90 Degree: 54.5 in Freezer Capacity Volume: 3.95 cu. ft. G Open original source ↗ Why this value was used Depth Excluding Doors = 25.188 in \| h Closed Excluding Handles: 29.438 in Depth Closed Including Handles: 29.438 in Depth Excluding Doors: 25.188 in Depth With Door Open 90 Degree: 54.5 in Freezer Capacity Volume: 3.95 cu. ft. G Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	29.438 in	✓ Secondary source only	Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com	Retained specification excerpt: Depth Closed Excluding Handles = 29.438 in \| _form/) ## Specifications Dimensions Cabinet Width: 27.
Value used by ExactFit 29.438 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Closed Excluding Handles = 29.438 in \| _form/) ## Specifications Dimensions Cabinet Width: 27. Reviewed: 2026-09-04 Depth Closed Excluding Handles = 29.438 in \| _form/) ## Specifications Dimensions Cabinet Width: 27.938 in Depth: 29.4375 in Depth Closed Excluding Handles: 29.438 in Depth Closed Including Handles: 29.438 in Depth Excluding Doors: 25.188 in Dept Open original source ↗ Why this value was used Depth Closed Excluding Handles = 29.438 in \| _form/) ## Specifications Dimensions Cabinet Width: 27.938 in Depth: 29.4375 in Depth Closed Excluding Handles: 29.438 in Depth Closed Including Handles: 29.438 in Depth Excluding Doors: 25.188 in Dept Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	29.438 in	✓ Secondary source only	Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com	Retained specification excerpt: Depth Closed Including Handles = 29.438 in \| et Width: 27.938 in Depth: 29.4375 in Depth Closed Excl
Value used by ExactFit 29.438 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Closed Including Handles = 29.438 in \| et Width: 27.938 in Depth: 29.4375 in Depth Closed Excl Reviewed: 2026-09-04 Depth Closed Including Handles = 29.438 in \| et Width: 27.938 in Depth: 29.4375 in Depth Closed Excluding Handles: 29.438 in Depth Closed Including Handles: 29.438 in Depth Excluding Doors: 25.188 in Depth With Door Open 90 Degree: 54.5 in Freeze Open original source ↗ Why this value was used Depth Closed Including Handles = 29.438 in \| et Width: 27.938 in Depth: 29.4375 in Depth Closed Excluding Handles: 29.438 in Depth Closed Including Handles: 29.438 in Depth Excluding Doors: 25.188 in Depth With Door Open 90 Degree: 54.5 in Freeze Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	54.5 in	✓ Secondary source only	Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com	Retained specification excerpt: ndles: 29.438 in Depth Excluding Doors: 25.188 in Depth With Door Open 90 Degree: 54.5 in Freezer Ca
Value used by ExactFit 54.5 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: ndles: 29.438 in Depth Excluding Doors: 25.188 in Depth With Door Open 90 Degree: 54.5 in Freezer Ca Reviewed: 2026-09-04 ndles: 29.438 in Depth Excluding Doors: 25.188 in Depth With Door Open 90 Degree: 54.5 in Freezer Capacity Volume: 3.95 cu. ft. Gross Weigh Open original source ↗ Why this value was used ndles: 29.438 in Depth Excluding Doors: 25.188 in Depth With Door Open 90 Degree: 54.5 in Freezer Capacity Volume: 3.95 cu. ft. Gross Weigh Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	Unknown	? Not found · Calculated/inferred	Whirlpool measurement source — https://www.ajmadison.com/cgi-bin/ajmadison/WRTX5118TW.html?srsltid=AfmBOoo9RYX-9oWU7oIK_NIumjczu0pzwYS3Cft4qNpvoSJRrMpuumPY + local-cache manufacturer-family consensus www.ajmadison.com	Retained specification excerpt: Derived minimum opening width 28.938 in from product width 27.938 in and explicit 0.5 in clearance o
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 27.938 + 2 * 0.5 Confidence label: medium. Primary evidence Whirlpool measurement source — https://www.ajmadison.com/cgi-bin/ajmadison/WRTX5118TW.html?srsltid=AfmBOoo9RYX-9oWU7oIK_NIumjczu0pzwYS3Cft4qNpvoSJRrMpuumPY + local-cache manufacturer-family consensus www.ajmadison.com · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Derived minimum opening width 28.938 in from product width 27.938 in and explicit 0.5 in clearance o Reviewed: 2026-09-04 Derived minimum opening width 28.938 in from product width 27.938 in and explicit 0.5 in clearance on each side. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 28.938 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	69.5 in	✓ Secondary source only · Calculated/inferred	Whirlpool WRTX5118TW Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 69.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence Whirlpool WRTX5118TW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 Whirlpool opening envelope: max(67.375, 68.0) + 1.5 = 69.5 in. Open original source ↗ Why this value was used Whirlpool opening envelope: max(67.375, 68.0) + 1.5 = 69.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	26.188 in	✓ Secondary source only · Calculated/inferred	Whirlpool WRTX5118TW Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 26.188 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence Whirlpool WRTX5118TW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 Whirlpool opening envelope: 25.188 + 1.0 = 26.188 in. Open original source ↗ Why this value was used Whirlpool opening envelope: 25.188 + 1.0 = 26.188 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	0.5 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202605/dimension-guide-w11821754-reva.pdf Whirlpool	Page 2
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRTX5118* Confidence label: high. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202605/dimension-guide-w11821754-reva.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 1/2" space on each side Open original source ↗ Why this value was used 1/2" space on each side Calculation or inference: documented DOE model pattern WRTX5118*. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	0.5 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202605/dimension-guide-w11821754-reva.pdf Whirlpool	Page 2
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRTX5118* Confidence label: high. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202605/dimension-guide-w11821754-reva.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 1/2" space on each side Open original source ↗ Why this value was used 1/2" space on each side Calculation or inference: documented DOE model pattern WRTX5118*. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	1.5 in	✓ Secondary source only	Whirlpool WRTX5118TW Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 1.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRTX5118TW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" Open original source ↗ Why this value was used Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	1 in	✓ Secondary source only	Whirlpool WRTX5118TW Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 1 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRTX5118TW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator Open original source ↗ Why this value was used Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	Unknown	? Not found · Calculated/inferred	Whirlpool WRT519SZDT Dimension Guide assets.skulytics.io	Page 2
Value used by ExactFit Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: conflict-free 2-inch consensus across Whirlpool top-mount installation platforms Confidence label: medium. Primary evidence Whirlpool WRT519SZDT Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Not established Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Whirlpool top-mount platform requirement: 2" (5.08 cm) minimum on the hinge side; independently confirmed in WRTX3021, WRTX5028, WRTX5328, and WRTX7421 guides. Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 2 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	27.938 in	✓ Secondary source only	Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com	Retained specification excerpt: pages/builder_form/) ## Specifications Dimensions Cabinet Width: 27.938 in Depth: 29.4375 in Depth C
Value used by ExactFit 27.938 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRTX5118TW 28 Inch Freestanding Top ... www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: pages/builder_form/) ## Specifications Dimensions Cabinet Width: 27.938 in Depth: 29.4375 in Depth C Reviewed: 2026-09-04 pages/builder_form/) ## Specifications Dimensions Cabinet Width: 27.938 in Depth: 29.4375 in Depth Closed Excluding Handles: Open original source ↗ Why this value was used pages/builder_form/) ## Specifications Dimensions Cabinet Width: 27.938 in Depth: 29.4375 in Depth Closed Excluding Handles: Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	Unknown	? Not found · Calculated/inferred	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Freestanding Whirlpool-platform family side clearance Confidence label: low. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-04 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Measurements not established

Minimum cutout width

Not found for safe fit use. Sources retained: https://www.ajmadison.com/cgi-bin/ajmadison/WRTX5118TW.html?srsltid=AfmBOoo9RYX-9oWU7oIK_NIumjczu0pzwYS3Cft4qNpvoSJRrMpuumPY + local-cache manufacturer-family consensus. Related-model record: WRTX5118TW.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Hinge-side wall clearance

Not found for safe fit use. Sources retained: 105518640.pdf. Related-model record: WRT519SZDT.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Adjoining-wall clearance (reviewed endpoint)

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRTX5118TW.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Source documents and pages

Whirlpool WRTX5118TW 28 Inch Freestanding Top ...

www.ajmadison.com · Web source · secondary model/source

Model numbers covered: WRTX5118TW. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

8 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Cabinet case width.