Measurement evidence for Whirlpool WRTX3316TW

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Whirlpool WRTX3316TW fit check Check this model against your opening How ExactFit verifies measurements

Whirlpool WRTX3316TW

Top Freezer · Standard-depth
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Complete mixed evidence

0exact-model manufacturer values

1verified equivalent/same-chassis values

12secondary-source-only values

3values with unresolved source details

Last reviewed: 2026-09-05. 6 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	28 in	✓ Secondary source only	WHIRLPOOL Whirlpool 28-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 16.3 Cu. Ft. ... metroappliancesandmore.com	Retained specification excerpt: Exact-model cached table: Width With Doors Closed = 28 in; Product Width is separately 28.125 in.
Value used by ExactFit 28 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WHIRLPOOL Whirlpool 28-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 16.3 Cu. Ft. ... metroappliancesandmore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Exact-model cached table: Width With Doors Closed = 28 in; Product Width is separately 28.125 in. Reviewed: 2026-09-04 Exact-model cached table: Width With Doors Closed = 28 in; Product Width is separately 28.125 in. Open original source ↗ Why this value was used Exact-model cached table: Width With Doors Closed = 28 in; Product Width is separately 28.125 in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	66.625 in	✓ Secondary source only	WHIRLPOOL Whirlpool 28-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 16.3 Cu. Ft. ... metroappliancesandmore.com	Retained specification excerpt: Exact-model cached table: Height To Top Of Cabinet = 66.625 in.
Value used by ExactFit 66.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WHIRLPOOL Whirlpool 28-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 16.3 Cu. Ft. ... metroappliancesandmore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Exact-model cached table: Height To Top Of Cabinet = 66.625 in. Reviewed: 2026-09-04 Exact-model cached table: Height To Top Of Cabinet = 66.625 in. Open original source ↗ Why this value was used Exact-model cached table: Height To Top Of Cabinet = 66.625 in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	66.625 in	✓ Secondary source only	WHIRLPOOL Whirlpool 28-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 16.3 Cu. Ft. ... metroappliancesandmore.com	Retained specification excerpt: Exact-model cached table: Height To Top Of Door Hinge = 66.625 in.
Value used by ExactFit 66.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WHIRLPOOL Whirlpool 28-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 16.3 Cu. Ft. ... metroappliancesandmore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Exact-model cached table: Height To Top Of Door Hinge = 66.625 in. Reviewed: 2026-09-04 Exact-model cached table: Height To Top Of Door Hinge = 66.625 in. Open original source ↗ Why this value was used Exact-model cached table: Height To Top Of Door Hinge = 66.625 in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	27.625 in	✓ Secondary source only	WRTX3316TW Whirlpool Top Freezer Refrigerator 28 inch ... www.canadianappliance.ca	Retained specification excerpt: Exact-model cached specification: Depth Excluding Doors = 27.625 in \| WRTX3316TW Whirlpool Top Freez
Value used by ExactFit 27.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence WRTX3316TW Whirlpool Top Freezer Refrigerator 28 inch ... www.canadianappliance.ca · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Exact-model cached specification: Depth Excluding Doors = 27.625 in \| WRTX3316TW Whirlpool Top Freez Reviewed: 2026-09-04 Exact-model cached specification: Depth Excluding Doors = 27.625 in \| WRTX3316TW Whirlpool Top Freezer Refrigerator 28 inch ... Depth Excluding Doors, 27 5/8 inches ; Depth With Door Open 90°, 56 7/8 inches ; Door Opening Direction, Right ; Rev Open original source ↗ Why this value was used Exact-model cached specification: Depth Excluding Doors = 27.625 in \| WRTX3316TW Whirlpool Top Freezer Refrigerator 28 inch ... Depth Excluding Doors, 27 5/8 inches ; Depth With Door Open 90°, 56 7/8 inches ; Door Opening Direction, Right ; Rev Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	31.875 in	✓ Secondary source only	WHIRLPOOL Whirlpool 28-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 16.3 Cu. Ft. ... metroappliancesandmore.com	Retained specification excerpt: Exact-model cached table: Depth Closed Excluding Handles = 31.875 in.
Value used by ExactFit 31.875 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WHIRLPOOL Whirlpool 28-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 16.3 Cu. Ft. ... metroappliancesandmore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Exact-model cached table: Depth Closed Excluding Handles = 31.875 in. Reviewed: 2026-09-04 Exact-model cached table: Depth Closed Excluding Handles = 31.875 in. Open original source ↗ Why this value was used Exact-model cached table: Depth Closed Excluding Handles = 31.875 in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	31.875 in	✓ Secondary source only	WHIRLPOOL Whirlpool 28-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 16.3 Cu. Ft. ... metroappliancesandmore.com	Retained specification excerpt: Exact-model cached table: Depth Closed Including Handles = 31.875 in.
Value used by ExactFit 31.875 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WHIRLPOOL Whirlpool 28-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 16.3 Cu. Ft. ... metroappliancesandmore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Exact-model cached table: Depth Closed Including Handles = 31.875 in. Reviewed: 2026-09-04 Exact-model cached table: Depth Closed Including Handles = 31.875 in. Open original source ↗ Why this value was used Exact-model cached table: Depth Closed Including Handles = 31.875 in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	56.875 in	✓ Secondary source only	WRTX3316TW Whirlpool Top Freezer Refrigerator 28 inch ... www.canadianappliance.ca	Retained specification excerpt: Exact-model cached specification: Depth With Door Open 90° = 56.875 in \| ool Top Freezer Refrigerato
Value used by ExactFit 56.875 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence WRTX3316TW Whirlpool Top Freezer Refrigerator 28 inch ... www.canadianappliance.ca · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Exact-model cached specification: Depth With Door Open 90° = 56.875 in \| ool Top Freezer Refrigerato Reviewed: 2026-09-04 Exact-model cached specification: Depth With Door Open 90° = 56.875 in \| ool Top Freezer Refrigerator 28 inch ... Depth Excluding Doors, 27 5/8 inches ; Depth With Door Open 90°, 56 7/8 inches ; Door Opening Direction, Right ; Reversible Door, Yes. Open original source ↗ Why this value was used Exact-model cached specification: Depth With Door Open 90° = 56.875 in \| ool Top Freezer Refrigerator 28 inch ... Depth Excluding Doors, 27 5/8 inches ; Depth With Door Open 90°, 56 7/8 inches ; Door Opening Direction, Right ; Reversible Door, Yes. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	29 in	✓ Verified — equivalent model · Calculated/inferred	Whirlpool WRTX3316TB Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 29 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: 28 + 2 * 0.5 = 29 inches Confidence label: medium. Primary evidence Whirlpool WRTX3316TB Owners Manual assets.skulytics.io · Owners Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-04 WRTX3316 cabinet/closed width is 28"; exact family manual requires 1/2" ventilation space on each side. Open original source ↗ Why this value was used WRTX3316 cabinet/closed width is 28"; exact family manual requires 1/2" ventilation space on each side. Calculation or inference: 28 + 2 * 0.5 = 29 inches. Why evidence from WRTX3316TB applies Target model: WRTX3316TW. Supporting model: WRTX3316TB. Manufacturer: Whirlpool. Product family and measurement relationship: 28 + 2 * 0.5 = 29 inches. Measurement transferred: Minimum cutout width. Relevant equivalence evidence: WRTX3316 cabinet/closed width is 28"; exact family manual requires 1/2" ventilation space on each side.. Known differences: not separately recorded. Review decision: sibling chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	68.125 in	✓ Secondary source only · Calculated/inferred	Whirlpool WRTX3316TW Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 68.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence Whirlpool WRTX3316TW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 Whirlpool opening envelope: max(66.625, 66.625) + 1.5 = 68.125 in. Open original source ↗ Why this value was used Whirlpool opening envelope: max(66.625, 66.625) + 1.5 = 68.125 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	28.625 in	✓ Secondary source only · Calculated/inferred	Whirlpool WRTX3316TW Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 28.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence Whirlpool WRTX3316TW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 Whirlpool opening envelope: 27.625 + 1.0 = 28.625 in. Open original source ↗ Why this value was used Whirlpool opening envelope: 27.625 + 1.0 = 28.625 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	Unknown	? Not found	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-05 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used The retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	Unknown	? Not found	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-05 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used The retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	1.5 in	✓ Secondary source only	Whirlpool WRTX3316TW Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 1.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRTX3316TW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" Open original source ↗ Why this value was used Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	1 in	✓ Secondary source only	Whirlpool WRTX3316TW Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 1 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRTX3316TW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator Open original source ↗ Why this value was used Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	Unknown	? Not found · Calculated/inferred	Whirlpool WRT519SZDT Dimension Guide assets.skulytics.io	Page 2
Value used by ExactFit Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: conflict-free 2-inch consensus across Whirlpool top-mount installation platforms Confidence label: medium. Primary evidence Whirlpool WRT519SZDT Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Not established Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Whirlpool top-mount platform requirement: 2" (5.08 cm) minimum on the hinge side; independently confirmed in WRTX3021, WRTX5028, WRTX5328, and WRTX7421 guides. Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 2 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	28 in	✓ Secondary source only	WHIRLPOOL Whirlpool 28-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 16.3 Cu. Ft. ... metroappliancesandmore.com	Retained specification excerpt: Exact-model cached table: Cabinet Width = 28 in.
Value used by ExactFit 28 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence WHIRLPOOL Whirlpool 28-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 16.3 Cu. Ft. ... metroappliancesandmore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Exact-model cached table: Cabinet Width = 28 in. Reviewed: 2026-09-04 Exact-model cached table: Cabinet Width = 28 in. Open original source ↗ Why this value was used Exact-model cached table: Cabinet Width = 28 in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	Unknown	? Not found · Calculated/inferred	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Freestanding Whirlpool-platform family side clearance Confidence label: low. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-04 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Measurements not established

Left-side ventilation clearance

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRTX3316TW.

The retained record does not establish source scope or a resolvable supporting source.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Right-side ventilation clearance

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRTX3316TW.

The retained record does not establish source scope or a resolvable supporting source.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Hinge-side wall clearance

Not found for safe fit use. Sources retained: 105518640.pdf. Related-model record: WRT519SZDT.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Adjoining-wall clearance (reviewed endpoint)

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRTX3316TW.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Source documents and pages

WHIRLPOOL Whirlpool 28-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 16.3 Cu. Ft. ...

metroappliancesandmore.com · Web source · secondary model/source

Model numbers covered: WRTX3316TW. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

6 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth with door, without handles; Depth with handle; Cabinet case width.